2 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Vasa model Catapult |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
3 x | Long pinned hinge (12 uds) |
2 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Universal Colour Paste white 50 g |
2 x | Screw-lock connector M2 (2 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Optotronix Aurora Plug |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Quicklock washer 2 mm (10 pcs) |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | 5 mm M2 variable horn |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
2 x | Absorver mount set for 5-10 Kg models |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | Quicklock washer 4 mm (10 pcs) |
2 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
3 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Connectors banna oro 2 mm (M/F) |
2 x | Strip 1,5x1,5x330 mm |
5 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | Round Rod 1,25x1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Pilot "Anthony" (Slimline) |
1 x | Gold antispark 4 mm plug |
6 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
2 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Spray adhesive AEROFIX 2 |
4 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
6 x | Wheel collar 2 mm Ø (4 uds) |
2 x | L-Connector 1.0 mm x 1000 mm |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Round Rod 2,5x1000 mm |
5 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Round Rod 3,0x1000 mm |
1 x | 20 mm carbon horn |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Blind nut M5 (4 pcs) |
2 x | Profile ABS Square 2 x 1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Micro clevis (10 uds) |
3 x | 45 mm rods set for direction control |
3 x | 140 mm rods + T patellas set for direction control |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Windsock Ozone L - 700 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Horn DUBRO 1/2A |
1 x | 1/4 Pilot "Heidi" |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Hobbylite Filler, Balsa colour |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Connector Sub-D 2+5 Female |
1 x | 1/7 Pilot "Japanese" |
1 x | Spray EC Red 400ml |
1 x | Extension silicon 10 cm (Graupner) |
2 x | Ferrita con funda |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Micro flex hinge (12 uds) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | 500 ml sealer (DOPE) |
1 x | XT-60 connector (female) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | White large kwik link (10 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Short adjustable control horn 3x24 |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | XT-90 connector (pair) |
5 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Cable coupler M2 (10 uds) |
1 x | 20 g tin paste |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Round Rod 1,0x1000 mm |
1 x | Couple M4 for wire (10 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Horn 5/15 with M2 Bearing |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | ABS angle 6,0x6,0x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | XT-30 connector (pair) |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Oracover Orange 2 m |
2 x | Connector CAN 15 |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
2 x | ABS angle 2,0x2,0x1000 mm |
2 x | Horn 20x28,5 mm (2 pcs) |
1 x | Metal ball clevis M3 (10 uds) |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
3 x | Opale Rucksack |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | ABS tube 4.0x3.0x1000 mm |
1 x | USB Mini Camera endoscope |
2 x | MPX-Dean "T" Adapter |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | ABS tube 3.0x1.0x1000 mm |
2 x | 1/6 Pilot "Tony" |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
3 x | Gates hinge aluminium (1 pcs) |
2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Cabling for Fox MDM1 wings |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
4 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Piston ring for DLE-20 RA |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | Cable with accesories |
2 x | ABS tube 5.0x4.0x1000 mm |
5 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Miss ULTIMATE 50E Yellow/Black |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Conector Servo female 4 pines |
1 x | Small pinned hinge (6 uds) |
1 x | ABS tube 6.0x5.0x1000 mm |
4 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
4 x | Long pinned hinge (6 uds) |
4 x | Aluminium sheet 500x250x0,5mm |
2 x | Round flex hinge (12 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | ORACOVER Fluor red (2 m) |
1 x | Brass control horn M4 short for wire (4 pcs) |
4 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | 200 Newtons FEMA absorber |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | LUCAS pilot ARTF |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
3 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | Cable coupler M2x66 (2 uds) |
2 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Cable coupler M3 (10 uds) |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | ABS tube 6.0x4.0x1000 mm |
2 x | 6 mm M3 variable inclined horn |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | 2 LiPo XH>EH adapter |
3 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Bags de Luxe ULTIMATUM 2.0 |
5 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Marker ties (20 pcs) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Tape GFK 50 mm |
1 x | CC 01 |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | ABS Strip 1.5x4.0x1000 mm |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Gates hinge |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
2 x | ABS tube 4.0x2.0x1000 mm |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 30 cm BEC cable (female) |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Manual Controller |
1 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Paramotor BackPack XXS 2 |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Wing OXY 5,0 m2 |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Mold plugs XT-30 |
3 x | Small flex hinge (12 uds) |
3 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Adjustable launching hook |
3 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | 1/6 Pilot "John" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Parachute P4 |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Cylynder DLE 20-RA |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | Cable control set |
4 x | Nylon hinge 20x15x0,3 (10 pcs) |
4 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Xplorer4 anemometro |
3 x | ABS tube 14.0x10.0x1000 mm |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
5 x | Katana Mini carbon wheel pants (2 pcs) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Towing hook |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Pilot "Dick" Legends Series (Slimline) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Horn 6/35 with M3 Bearing |
2 x | Profile ABS Square 4 x 1000 mm |
4 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
2 x | 80 mm rods set for direction control |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | 1/10 Pilot "Jack" |
3 x | Cabel "Y" 30 cm (graupner) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Wing connector 8pin with pin strip, plug & socket |
3 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | M3-M4 rubber washer (8 pcs) |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | 1/6 Pilot "Garry" |
1 x | 25 mm reinforced hinge |
1 x | Small aluminium horn red (2pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Strip 2,0x2,0x330 mm |
5 x | Mudguard for 140/165 mm wheels |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | XT-60 connector (male) |
2 x | RH long aluminium horn (2pcs) |
1 x | Nitroverdu 500 ml |
1 x | Lense for Spotlights, 20mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Profile ABS half cane 2.0x1000 mm |
1 x | Allen wheel collar M3x5 |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Buy Perforated film 100 cm / 10 m |
1 x | Extension silicon 100 cm (Futaba) |
2 x | Indoor hinge with servo arm integraded |
1 x | Universal Colour Paste deep black 250 g |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | SUPER DIMONA TC-80 |
2 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | Allen wheel collar M3x3 |
1 x | 1/4 Pilot "Mike" |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
2 x | ABS tube 9.0x7.0x1000 mm |
1 x | Optical RPM Sensor |
4 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Dean "T" - Futaba Adapter |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | 1/10 Pilot "Jimmy" |
1 x | |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Tow hook for tug |
2 x | Z type of cable coupler Ø 2 (2 uds) |
3 x | Extra long horn 60x30 |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Towing hook <3m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Buy Perforated film 100 cm / 50 m |
2 x | ABS tube 8.0x6.0x1000 mm |
1 x | Horn 6/20 with M3 Bearing |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | 90 mm rods + T patellas set for direction control |
2 x | SE Ring 200 mm (2 pcs) |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | Parachute BACKUP X100 |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Clip mini fixing for wing (2 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Round Rod 4,0x1000 mm |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Fixed launching hook |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Para-RC Mix |
1 x | Ply-Span 450x600/13g Black |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
2 x | Brass control horn M2 large for wire (2pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Profile ABS half cane 8.0x1000 mm |
2 x | Extension silicon 30 cm male (Graupner) |
1 x | 400 Newtons FEMA absorber |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | 1/12 Pilot "Fighter" |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
6 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Windsock Ozone L -1200 mm |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Towing hook |
1 x | ABS angle 3,0x3,0x1000 mm |
2 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
2 x | ABS I Strip 20x10x1000 mm |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Adjustable brass horn threaded M3 |
2 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | 3 LiPo XH>EH adapter |
1 x | Double conector with JR adapter and 200 mm extension |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 30 cm DEANS female connector |
2 x | Xplorer2 anemometro |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | 6 mm aluminium horn with patella |
1 x | Horn 6/27 with M3 Bearing |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | BEC 3A FOXY |
3 x | Rubber profile 10-2 mm 2M |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
2 x | Extension silicon 75 cm (Graupner) |
1 x | Paramotor Trike XL |
1 x | Oracover CARBON Metalic 1 m |
1 x | 1/12 Pilot "Cougar" |
2 x | Profile ABS half cane 7.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Stickers-digit for marking |
1 x | Round Rod 2,0x1000 mm |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
2 x | Kwik link AL M4 con Clip (2 pcs) |
2 x | ABS tube 10.0x8.0x1000 mm |
2 x | Horn with ball 40x30 |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
5 x | Wheel collar 3 mm Ø (4 uds) |
1 x | 1/6 Pilot "Buddy" |
3 x | 15 mm reinforced hinge |
1 x | Round Rod 5,0x1000 mm |
1 x | 10 mm floating pad (72 pcs) |
1 x | Allen wheel collar M4x4 |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Horn with ball 55x40 |
2 x | SE Ring 400 mm (2 pcs) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Cinta Goldfix 1m |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
4 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
2 x | Ferrita 14x8x5.5 mm |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Threaded coupler M3 (10 uds) |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Blind nut M2 (10 pcs) |
2 x | ABS Strip 1.5x2.0x1000 mm |
2 x | Extension PVC 150 cm (Graupner) |
1 x | 800TVL CMOS camera for FPV |
1 x | CM-3 |
1 x | M3 black washers (4 pcs) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | CC 03 |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Conector JR Servo female (10 pcs) |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Set cintas unión paracaídas 145 cm |
1 x | 1/12 Pilot "Langley" |
2 x | 38x4,5 mm wires output (2 pcs) |
2 x | 100 mm rods + T patellas set for direction control |
1 x | 300 Newtons FEMA absorber |
1 x | Ventus 1:4 set of instruments |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Spannlack 1000 ml |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | Buy Perforated film 145 cm / 50 m |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Bag connector 2 mm |
2 x | Cable tie mounts 4.3 (4 uds) |
1 x | ABS tube 7.0x6.0x1000 mm |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Oracover White 10 m |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
3 x | 140 mm rods set for direction control |
1 x | Partall paste 650 g |
1 x | Oracover Verde 2 m |
2 x | Rubber profile 6-2 mm 2M |
1 x | 20x200 mm battery rings |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Cable grommet 9.5 mm (4 uds) |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Metal clevis M2 (10 uds) |
1 x | 4 LiPo XH>EH adapter |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Oratex Natural White 2m |
1 x | Oracover Yellow CADMIO 2 m |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | ABS Strip 1.5x8.0x1000 mm |
1 x | 30 cm MULTIPLEX female connector |
3 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Tape GFK 25 mm |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | USB HLS prog. interface |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Angled clevis with threaded rod M3 |
1 x | Gold antispark 5,5 mm plug |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
2 x | Extension silicon 30 cm female (Graupner) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 2 mm female connector (2 pcs) with safety connector |
2 x | Profile ABS half cane 6.0x1000 mm |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | 18 mm reinforced hinge |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Covered closure or fairings |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
2 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Flap hinge (6 pcs) |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | ORACOVER Ferrari red (2 m) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Ply-Span 450x600/13g White |
1 x | 6 mm M3 variable horn |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Blind nut M6 (4 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Connectors DEANS (T) micro |
2 x | Canopy Latch |
1 x | 12.7 mm 2:1 black termoretract tube |
3 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Blind nut M4 (4 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
2 x | Strip 2,5x1,25x330 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | 30 cm BEC cable (male) |
2 x | ABS tube 5.0x3.0x1000 mm |
2 x | 1/6 Pilot "Cindy" |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
3 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Ring 320 mm length (5 pcs) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Round Rod 1,5x1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Conector BEC female (10 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Filler Gauges |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Pilot "Goose" (Slimline) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | ABS tube 7.0x5.0x1000 mm |
1 x | Oracover Azul 2 m |
3 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Oracover Azul Cielo 2 m |
2 x | 1000 ml sealer (DOPE) |
1 x | Connectors MPX black female |
2 x | Conector JR Servo male (10 pcs) |
2 x | SE Ring 450 mm (2 pcs) |
2 x | Control horn long w/ball |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Straightened threaded rod M2-1m |
1 x | Receiver bed (Blue) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
2 x | LED blink wire flashing (blue - 2pcs) |
2 x | LED wire (orange - 2pcs) |
1 x | Catalog AERO-NAUT 2016 |
2 x | LED wire (white - 2pcs) |
2 x | LED blink wire flashing (green - 2pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | LED wire (green - 2pcs) |
1 x | Motor mount M |
1 x | Secraft Fuel system v2, red color |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Servo Mount S (red) |
1 x | Rudder 2_Tray 3~3.5 inch |
2 x | LED blink wire flashing (orange - 2pcs) |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Futaba Female 40 cm extension |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
3 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | TAKEO 3.6m electric |
3 x | ABS 500 x 400 x 1 mm (white) |
2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
3 x | Propeller balancer |
1 x | Premium servo extension 25cm |
1 x | 40 mm air cylinder |
2 x | Surface Indicator Gauge Small |
1 x | Extension 7.5 cm |
1 x | Prolongador S-Bus JR/JR 20cm |
2 x | Medidor ángulos y/o incidencias |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Glass fabric 25 g/m² (1 m²) |
2 x | Q-12 X-light 2000 mm Electric |
1 x | Premium servo extension 50cm |
1 x | Flap hinge 33x9 mm (6 pcs) |
4 x | SATORI 2 PRO V C64 F5J |
1 x | Horn mando small (2 pcs) |
1 x | Neumatic retractable landing gear (Aero-Naut) |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Astra (Top Model) |
2 x | Horn mando long (2 pcs) |
2 x | Extension 90 cm (Futaba) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
2 x | Trailing leg 131 mm |
1 x | Gracia Maxi ARF (Top Model) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Glass fabric 25 g (2 m²) |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Foam plastic plates (310x210x3 mm) |
2 x | Extension 100 cm (Futaba) |
2 x | Q-12 2000 mm Electric |
1 x | Gracia Maxi ARF, bags (Top Model) |
1 x | Circlick securite |
1 x | Futaba Female 40 cm extension |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Extension 15 cm (Futaba) |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Mini neumatic retract landing gear |
2 x | Extension lead 15 cm Multiplex |
3 x | Propeller balancer |
3 x | PRO-HV Dual Action Valve |
1 x | Film release agent PVA 25 ml |
1 x | Styrene plate 320x120x1.0 mm |
1 x | 200 mm extensión servo HITEC/JR |
2 x | Gracia Maxi ARF, spare wings (Top Model) |
2 x | Hose connector stopper 4 mm |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
3 x | Field folding model stand |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
2 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | Brass control horn M3 short for wire (2 pcs) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Premium servo extension 75cm |
2 x | Extension 30 cm (Futaba) |
1 x | Extension silicon 100 cm (Graupner) |
2 x | WingFix ULTRA Black Edition |
1 x | Premium servo extension 100cm |
1 x | MAMBO 17 |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | GameCommander USB Universal |
2 x | Control for forward wheel (MINI) |
1 x | Split pin 1x8 mm (10 uds) |
2 x | Motor holder for AC 28/7 |
2 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Servo inverter |
1 x | |
1 x | Tip wing protector 40x14 (2 pcs) |
2 x | Slave-cable USB Easy Sim |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | GPS, Vario and altitude Sensor SBS-01G |
2 x | Cooler motor type 400 |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Cooler motor type 300 |
2 x | 28x5 mm wires output (2 pcs) |
1 x | Female connector for 12 pines AWG |
1 x | Ferrita 17x10x6.5 mm |
1 x | JETImodel Addcap 1640 |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Male connector for 6 pines AWG |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | EWC3 100 cm wing connector |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | JETImodel DPS 40 |
2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
2 x | Electric spoiler 185 mm (2 pcs) |
1 x | Retract undercarriage |
3 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | DPSI magnetic switch actuator (housing) |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
2 x | Ferrita 27x14x7 mm |
3 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Male connector for 16 pines AWG |
1 x | FX three-position switched channel, long |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Interruptor SPS 70v 60/120A |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | EWC6 40 cm wing connector |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
2 x | MIG 29 3D RTF, Servo |
1 x | Xplorer3 anemometro |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Socket Screw M3x9 mm |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Threaded insert M6 (10 pcs) |
1 x | Vest clothes Hispano Aviación |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | CC 05 |
1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Cap Hispano Aviación |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
3 x | TrainerCord (master-learner) |
1 x | Threaded insert M3 (4 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Crystal Universal RX 35.020 Ch 62 |
2 x | Small pinned hinge (12 uds) |
1 x | Crystal TX 35.100 Ch 70 |
2 x | ABS tube 18.0x16.0x1000 mm |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Crystal RX 35.120 Ch 72 |
1 x | Crystal TX 35.050 Ch 65 |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
2 x | wire tensioner (black) |
2 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | DEMON CORTEXpro |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Pull-Pull complet set with CF rudder double servo arm |
2 x | Round Rod 1.0x3.5 cm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Pulley brass 5/1,5 (2 pcs) |
3 x | Wire easy tensioner (silver) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
2 x | Pulley brass 4/1,5 (2 pcs) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Profile ABS half cane 4x2.5x1000 mm |
3 x | Profile ABS half cane 3x1000 mm |
1 x | wire tensioner (silver) |
3 x | bavarianDEMON USB cable |
2 x | Profile ABS triangular 4.0x1000 mm 90º |
2 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Turnbuckle M2x22/35 (2pcs) |
2 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | ASK 21 6.5m + pylona |
3 x | Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m |
2 x | Elevator VENTUS 2cx 4.5m |
3 x | Fox 4000 mm Airworld,canopy frame |
1 x | Fox MDM-1 ARF 3.5m Orange |
3 x | LO 100 ARC 3.3m,cabina |
3 x | DG-303 ACRO 3750 mm (Airworld) |
2 x | LIBELLE Standard 3.8m D-box H-201 |
2 x | ASW 15 5000 mm (Airwold) |
3 x | ASH 31 Mi Scale:1/3 - 7m, elevator |
1 x | Fox MDM 1 6000 mm |
2 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | ASH 31 6.08m Composite Hollow Molded |
2 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | ASH 31 Mi Scale:1/3 - 7m |
1 x | 3,9 mm ZG20-ZG38 servo arm |
2 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
2 x | Fox 4000 mm Airworld,cabina |
4 x | LO 100 ARC 3.3m,frame canopy |
1 x | Jeti Black cap |
1 x | ASK 21 6.8m |
1 x | Distanzstück motor OS 120 AX |
2 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | Short ball link M1.6 (6 uds) |
1 x | Z-shaped servo mount |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | X-RAY Micro QR |
1 x | PowerBox ROYAL SRS |
1 x | PowerBox PIONEER incl. microSwitch |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Connectors MPX black male |
1 x | Spray Graphit 33 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Ply-Span 450x600/13g Blue |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Solvent Plasti Dip 1000 ml |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Body for landing gear Ø 3 mm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | T-Hose connector 3-3-3 mm |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
2 x | 20 mm gas motor standoff |
2 x | SE Ring 250 mm (2 pcs) |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
2 x | Styrene plate 320x120x0.5 mm |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
3 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Conector BEC male (10 pcs) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Banna gold connector 2,5 mm (M/F) |
2 x | 41x5,5 mm wires output (2 pcs) |
2 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Turbine HORNET 85 SE |
1 x | Set stickers JEEMO "Andy" |
1 x | Air pressure gauge |
1 x | Rocket D3-P |
1 x | BETA 1400 ARF Red |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | KAVAN Hand crank fuel pump |
2 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Extension MPX-MPX 20 cm |
2 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
2 x | Soporte servo KST X10 mini / DS135MG |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | FIALA Propeller 23x8 Electric |
1 x | MB339 CAMUFLAGE PNP 1790 mm |
1 x | RANGER Jet Red/White 1.854mm combo |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Boomerang ELAN THUNDERBIRD Combo |
1 x | HITEC DPC-11 programmer |
1 x | Avanti S Jet , Field folding model stand (SebArt) |
1 x | VIPER SL YELLOW PNP 2270 mm |
1 x | Cooler motor type 280 |
1 x | Avanti S Jet , Carrying bags (SebArt) |
1 x | Servo inverter |
1 x | Oracover Black 2 m |
1 x | Avanti S Jet , Exhaust for JetCat P-140 (SebArt) |
2 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x FESTO 90º 6mm CLASSIC PRO |
2 x | Intairco CMB Super Filter - 6mm Barb |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Boomerang SPRINT V2 Red/White/Blue |
2 x | Angle measurer |
1 x | PC-21 XXL 3.395 mm |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | 21x14 Falcon electric carbon prop (64 g) |
3 x | Gracia (Top Model) |
2 x | Carbon plate 350x150x2.0 mm |
1 x | Brake controller for 28 and 36 mm Brakes |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | METEOR 1.000 mm kit |
1 x | Avanti S Jet, Kerosene+Smoke Tank(SebART) |
1 x | FELIX SportJet Yellow 2200 mm |
1 x | Avanti S Jet , Vectorial Exhaust for JetCat P-180 |
1 x | Cockpit latch closing I=10 mm |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Propeller 12x6 Falcon electric |
1 x | RANGER Jet CANADA 1.854mm combo |
1 x | PC-21 2880 mm Spinner 5Blade red |
1 x | MIRAGE 2000 RED/BLACK PNP |
2 x | One touch canopy lock |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Snap long M2 (10 uds) |
1 x | Propeller electric carbon 9.5x5 |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Canister combo DLE 55 cc |
2 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | 90° TUBE-ANGLE Ø 28 mm |
1 x | Porpeller HUNTER 480 |
1 x | TARANIS Q X7 |
1 x | Solid Headers for Single Cylinder DA-60 Solid 50mm drop |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | LED wire (blue - 2pcs) |
1 x | Silencer with rear exhaust DA-120 |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Propeller POWER-PROP 14x8 |
2 x | Gobe R-26S (Airwold) |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. trasero |
1 x | Captador OS GT 33 cc |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | RX TARANIS V8FR-II HV 2.4 GHz |
1 x | Motor DLE 130 cc |
2 x | Window mounting channel 5m |
1 x | Propeller electric carbon 7x7 |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Motor DLE 65 cc |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Propeller electric carbon 10.5x8 |
1 x | Piston ring for DA-85 and DA-170 |
1 x | Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece |
1 x | PS-050 TONEGAWA Servo |
1 x | Fast attachment for servos (25 pcs) |
1 x | Horns set HS-65HB/MG, 5065MG |
2 x | Engine Kolm BX-155-2 with starter |
1 x | Pick up DA50/100/150 |
1 x | Steel conrod DA-50R and DA-60 |
1 x | Crankshaft DA-120 |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | SSPS105 Super Hi-Power servo |
1 x | Exhaust gasket Valach 85 |
1 x | VALACH VM 85 B2-FS |
1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
1 x | Carb Carrier, red DA-150L/170 |
2 x | GRAFAS MAXI ARF |
1 x | Piston pin for DA-60 DA-120 |
1 x | Arnes cruzado Confort de Luxe PROFI |
1 x | Screw M3x12 (10 pcs) |
1 x | Ignition for DA-35 (without pickup sensor) |
2 x | OS 40-FG 4T Motor |
1 x | Futaba male 40 cm extension |
1 x | Carburetor for DA150L/170 |
1 x | Swicht F14/FC-16 (3 pos) |
1 x | L ELBOW DA-150 "normal" (2 pcs) |
2 x | FUTABA 6L + R3106 2.4GHz |
1 x | Potenciometro micro |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Cylinder DA-50R, DA-100, DA-100L |
1 x | Medium pin type hinge (12 uds) |
1 x | UBEC 6A KAVAN |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Esc master MEZON 120 Lite |
1 x | PowerBox iGyro 3xtra |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Horns indoor |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Long horn 50x26 |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Switch Cap L (Red) |
1 x | TX-Tray V1 (L) (Black) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | SPS Remote switch actuator |
1 x | PSC 5 |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | PowerBox SparkSwitch RS |
2 x | PWC4 wing/fuselage connector for 4 servos |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | SBEC 30 D |
1 x | PSC 6 |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | ESC YGE 90 HV F3A |
1 x | ESC MEZON 115 Opto |
1 x | ESC YGE 8 S |
2 x | Program Card KAVAN ES |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Esc MasterSPIN 99 Pro OPTO |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | CORTEX |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
2 x | wire tensioner (blue) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | DJI Mavic Air Fly More Combo |
1 x | 5 mm M2 variable inclined horn |
1 x | Set of buckles and strap, 1:4 scale. |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | LS-8 GFK 6m Glider |
1 x | Prelude ARF 2500 mm (TopModel) |
2 x | SHK 4000 mm Scale 1:4.25, V-Tails |
2 x | Swift S1 De-luxe 3.140 mm |
3 x | LO 100 ARC 3.3m |
2 x | LUNAK 4,00 m |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | ARS 300 91" ARF 2311mm ORANGE |
1 x | ULTRA STICK 30 cc ARF |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Conector MR-60 (pareja) |
1 x | Starter EM Gear Power 80 |
1 x | Refueling Cap V3 Black |
2 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Servo ROBBE FS-31 Pico Servo |
2 x | Servo Robbe FS 525 BB MG HV |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | PBS TJ 40-G1 Turbine |
1 x | Angle of incidence meter |
1 x | Block 21x19 mm (5 pcs) |
1 x | Turbina JetsMunt M122 NG |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | ECU BL180 Jets Munt |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Tren electrico JP ER-005-V2 Mini AVANTI (Sebart) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS CONNECTIONS |
1 x | Air Trap Mounting - 175ml |
1 x | Refueling kit for Cap "Red" |
1 x | Transmitter Stick Ends V1 Silver - M3 (2 pcs) |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | LED wire (rojo - 2pcs) |
1 x | 45 mm gas motor standoff |
1 x | 35 mm gas motor standoff |
1 x | Motor Mount for Multiplex FunJet |
1 x | Ø 50-60 mm canister holder |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | LED lighting system High Power |
1 x | 50 mm gas motor standoff |
1 x | Propeller POWER-PROP 12x6 |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | Mini Avanti S Jet, Set conversion turbine(SebART) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Hopper 125 ml INTAIRCO |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS ELBOW CONNECTIONS |
1 x | Intairco CMB Super Filter - 4mm Barb |
1 x | Motor DLE 55 RA |
1 x | HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm |
1 x | Motor DLE 20 RA cc |
1 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 6mm CLASSIC PRO |
1 x | Motor DLE 30 cc V2 |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Ignition KOLM BX-155-2 Engine |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | KingTech Turbineoil 10L |
1 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | Suncover 100cc Red |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | SPARK Switch 5.9v |
1 x | Short ball link M2 (6 uds) |
1 x | Servo Fork |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | 25 mm gas motor standoff |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | FPV Station for SE TX-Tray V1 |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Ø 65-75 mm canister holder |
1 x | Wheel 38 mm V2 |
1 x | Wire easy tensioner (red) |
1 x | Aluminium battery holder red |
1 x | SE Ring 350 mm (2 pcs) |
1 x | 15 mm gas motor standoff |
1 x | LED blink wire flashing (white - 2pcs) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Aluminium ignition bad (red) |
1 x | 10 mm gas motor standoff |
1 x | wire tensioner (red) |
1 x | Battery bed V2_S (black) |
1 x | Extension 2/3 lipos JST/C |
1 x | Transmitter Stick Ends V1 Blue - M3 (2 pcs) |
2 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Propeller POWER-PROP 13x8 |
1 x | Propeller electric carbon 8.5x5 |
1 x | Fiberglass motor-holder for electric motors |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | PT 21x13 EL Propeller |
1 x | 100 mm rods set for direction control |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
2 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | PROFI TX fastening rings |
1 x | AIRSPEED SENSOR SBS01TAS |
1 x | Cockpit aluminium closing |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | Metal gear set for HS81MG/5082MG |
1 x | Servo Tester |
1 x | Interruptor On/Off Corto micro |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | DIVA cabin cruiser |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | Ball link M2 (10 pcs) |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Futaba Prop Module F14 |
1 x | Compact on-board starting system (9713) |
1 x | Compact on-board starting system (9724) |
1 x | Servo holder for retract |
1 x | Metal ring front FEMA |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Battery LiFe -3000/25C-3S 9.9V |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Turbina KINGTECH K180 G4+ |
1 x | Support hands Issuer PROFI TX |
1 x | Turbina KINGTECH K55G4 |
1 x | COPILOT Multiplex |
1 x | AXI 2204 Multicopter |
1 x | 40 mm gas motor standoff |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Motor A50-12 L V4 |
1 x | Motor B50-14 S |
1 x | Motor B40 10L + MAXON 4,4:1 Keramik |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | Micro clevis (10 uds) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Metal clevis M3 (10 uds) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Small aluminium horn gold (2pcs) |
1 x | PC-21 XXL Bags |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | BLANIK 50 V2 Silver/Blue (SebArt) |
1 x | Ventus 2cx 4.5 m de Luxe |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
1 x | DUPLEX backpack for Jeti DS handheld transmitter |
1 x | Ventus 2cx 4.5 m Bag canopy |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | Ventus 2cx 4.5 m Canopy |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | Ventus 2cx 4.5 m |
1 x | Fox MDM 1 4000 mm Std. |
1 x | SAGITA Alsema 3.0 m |
1 x | Ventus 2cx 4.5 m Cabling wings |
1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
2 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
1 x | La Capitania di Venetia 1:50 |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Parachute XTRALITE S |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | Turbina KINGTECH K320 G5 |
1 x | Servo KST BLS905X HV V2.0 8Kg 20mm |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Propeller 3BL 35 mm M4 plastic Left |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
|
184,949.76EUR |