1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
3 x | Starter 12v (Max 180 and 30ccm) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Screwdriver for Hexagon 1,5mm |
1 x | 30 cm BEC cable (male) |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Circlick securite |
1 x | JETImodel SINGLE BEC |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Small aluminium horn blue (2pcs) |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | Cut tube |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Copier 2x20 cm pcs |
1 x | Horn 5/15 with M2 Bearing |
1 x | 30 cm BEC cable (female) |
1 x | 1/12 Pilot "Fighter" |
1 x | Vacuum pump P1-N |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Hot Glue Stick GREEN |
2 x | 6 mm aluminium horn with patella |
2 x | CC 03 |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | 200 mm extensión servo HITEC/JR |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Premium servo extension 100cm |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Threaded insert M3 (4 pcs) |
1 x | Blind nut M5 (4 pcs) |
2 x | Propeller diller for DLE111 and DA85-150 |
3 x | 2,3 mm Prop Adapter M5 |
1 x | Sealing Iron Profi LCD |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Sanyo TX Battery Eneloop 9,6 V 2500 mAh |
1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
2 x | Sanyo RX Battery Eneloop 4,8 V JR |
3 x | 2 mm Prop Adapter M5 |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Adapter 3,0 mm M6 |
3 x | 3 mm Short Prop Adapter M5 |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Horn 13,5x16 mm (2 pcs) |
2 x | Brass control horn M3 short for wire (2 pcs) |
2 x | 6 mm red aluminium threaded horn with patella |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | 5 mm Prop Adapter M6 |
1 x | XT-60 Plug Mold |
1 x | Blind nut M4 (4 pcs) |
2 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
3 x | 3 mm Long Prop Adapter M5 |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
2 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
2 x | Sealing Iron STANDARD |
1 x | Mold plugs XT-90 |
1 x | Nut for mounting M5 (4 pcs) |
2 x | Sub-D Plug Mold |
2 x | 5 mm Prop Adapter M8 |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Hexagonal Nut M2 (10 pcs) |
2 x | Propeller drill jig DA-35/50/60/70 |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Lock nut M5 (20 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Pistola termica MH 550 micro |
1 x | Hexagonal Nut M4 (10 pcs) |
2 x | Heat Seal Iron |
2 x | Schul-Malpinsel Gr.5 |
2 x | 100g Flux Paste for Silver Solder |
2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Hexagonal Nut M1,6 (10 pcs) |
2 x | Roller cutter 28 mm |
1 x | Hexagonal Nut M2.5 (10 pcs) |
2 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Blind nut M8 (10 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | MPX plug mold V1 |
1 x | Blind nut M2 (10 pcs) |
3 x | 2,3 mm Prop Drive Günther M4 |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | 4 mm Prop Adapter M6 |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | Tool for entel |
2 x | Pump hose (Ø 6/8 mm) transparent |
2 x | |
2 x | Regulador Jeti Jes 045 |
1 x | Smart Soldering Iron 110W/230V AC |
2 x | Boxed KIT OF 7 Rotary Burrs FINE |
2 x | EC-Cutter |
3 x | Extractor piñones 2.3/3.2 mm |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
2 x | Sanyo RX Battery Eneloop 6,0 V FUT |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
2 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
3 x | Crimping tool |
2 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Adapter 5,0 mm M8 |
1 x | Micro clevis (10 uds) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Adapter 3,2 mm M8 |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Angle support XT60 conector |
1 x | Turbine MAMMOTH 25.4 Kg |
1 x | Turbine RABBIT 100 SE 11 Kg |
1 x | Propeller APC 14x10 Electric |
1 x | Propeller APC 12x8 Electric |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Propeller APC 10x7 SF |
1 x | Propeller APC 11x7 Electric |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Propeller APC 12x8 SF |
1 x | Turbina X45 H "Light Version" |
1 x | Turbina XICOY X95 compact |
1 x | Battery LiFe -3000/25C-3S 9.9V |
1 x | Support FUEL DOT V3 |
1 x | Turbine CHEETAH 160 SE |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Cable video GoPro and 5V cable |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Cable with accesories |
1 x | Control horn long w/ball |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Starter Sullivan-STAR 601 |
1 x | Quicklock washer 2 mm (10 pcs) |
2 x | Horn with ball 40x30 |
1 x | Socket Head Screw M2x8 |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Socket Head Screw M2x5 |
1 x | Threaded insert M6 (10 pcs) |
1 x | Screw M3x5 (10 pcs) |
1 x | Servo M2x9/16 screw (4 pcs) |
2 x | Vacuum pump 12 CFM |
1 x | Ball Link Plier |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Ball link M3 (10 pcs) |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Coupling bush 5 - 5 mm |
1 x | Tachometer Hyperion Multi-pala |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
2 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | wire tensioner (black) |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | LS-8 GFK 6m Glider |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | ESC Ripmax QUANTUM 80A SBEC |
1 x | Horn 5/20 with M2 Bearing |
1 x | 6 mm M3 variable horn |
1 x | Cable control set |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 5 mm M2 variable inclined horn |
1 x | Horn DUBRO 1/2A |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn mando small (2 pcs) |
1 x | Extra long horn 60x30 |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Propeller Pleg CAM Carbon 12x8 |
1 x | Propeller Pleg CAM Carbon 14x8 |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | Lock washer 4.3 mm (20 pcs) |
2 x | Ball Link Plier |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | PSC 6 |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Canopy Latch |
1 x | Welder 100W/200V |
1 x | Distanzstück motor OS 120 AX |
1 x | Flap hinge (6 pcs) |
1 x | Adjustable brass horn threaded M3 |
1 x | MZ-12, 6 Channel HoTT |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
1 x | SERVO DES 588 BB MG |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | 18 mm reinforced hinge |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | EasyFLY Addon |
1 x | Altimeter Altis NAO |
1 x | Prog Card V2 DUALSKY |
1 x | ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Horn mando long (2 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | 20 mm carbon horn |
1 x | 6 mm M3 variable inclined horn |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horn for flap control (1 pcs) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Propeller diller for EME35 and DLE35 |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Propeller Pleg CAM Carbon 13x5 |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Steel brush wheel with 2.35mm |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Propeller diller for DA50, DLE55 red |
2 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | Mini Lock Grips 2PCS |
2 x | Mini Infrared Thermomiter |
1 x | Propeller Pleg CAM Carbon 16x13 |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Digital scale up to 40 kg |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Axle for motor A30-XL V2 |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Shaft for A60-20/22/24S (120 mm) |
1 x | Propadapter for motor A60-V2 |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Screwdriver for Torx® TX8 |
1 x | Aluminium wide washer M3 blue (4 pcs) |
2 x | Mold plugs XT-30 |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | Hot Glue Stick BLACK |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Heli digital angle measurer |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Starter EM Gear Power 250 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Axle for motor A20-S (3 uds) |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | MPX 8 pins plug mold |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | A50 Motor Mount Alu complete set |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | JETImodel Addcap 1640 |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Propadapter for motor A50 |
1 x | Handle for PERMAGRIT lime |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Shaft for A60-L V4 |
1 x | M3 black washers (4 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | FesEx-Uni6 System |
1 x | |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Sandpaper file 13 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | PSC 5 |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Pan head screw M2x16 PH |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Futaba 52 mm servo arm |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Screw M3x8(10 pcs) |
1 x | HITEC 20 mm servo arm with ball link |
1 x | 12 mm floating pad (49 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Socket Head Screw M2,5x12 |
1 x | Threaded insert M4 (4 pcs) |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | CC 01 |
1 x | Futaba 38 mm servo arm |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Socket Head Screw M2x12 |
1 x | Quick hose connector 6-4 mm |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Extinguisher CO2 - 2 Kg |
1 x | Decorative caps, multicoloured, short |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Altimeter Altis V4 |
1 x | Tachometer HANGAR 9 digital |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Keypad ALTIS V4 |
1 x | MZ-18, 9 Channel HoTT |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | POLARON EX 800w charger |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | USB interface ALTIS |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Propeller hub spacer 8/5.5 |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Foreman, scale 1:32 |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | SERVO DES 707 BB MG |
|
27,801.50EUR |