1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
3 x | Round Rod 5,0x1000 mm |
3 x | Strip ABS 2.0x3.0x1000 mm |
2 x | ABS I Strip 20x10x1000 mm |
2 x | ABS Strip 1.5x4.0x1000 mm |
2 x | Round Rod 4,0x1000 mm |
2 x | ABS Strip 1.0x5.0x1000 mm |
2 x | 400 Newtons FEMA absorber |
2 x | Strip 2,5x1,25x330 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Round Rod 3,0x1000 mm |
2 x | ABS Strip 1.0x2.0x1000 mm |
3 x | Round Rod 1,0x1000 mm |
1 x | 200 Newtons FEMA absorber |
1 x | 150 Newtons FEMA absorber |
1 x | ABS Strip 1.5x6.0x1000 mm |
3 x | Round Rod 2,0x1000 mm |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Mudguard for 140/165 mm wheels |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
2 x | BALSA trip 10x10x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
3 x | Cap closure 33/23.5mm (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
3 x | Cockpit plastic closing |
3 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | WingFix ULTRA Black Edition |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Smoke set "S" |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | 500 ml sealer (DOPE) |
1 x | Spray adhesive AEROFIX 2 |
1 x | Motor DLE 170 M- Paramotors |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Round Rod 1,25x1000 mm |
1 x | 1/12 Pilot "Fighter" |
1 x | 20 mm carbon horn |
1 x | 18m Fitting barb |
1 x | 110x55 mm SLH KOVO wheel |
1 x | 1/6 Pilot "Tony" |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Fully Threaded Steel Rod M3 |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Strip 2,0x2,0x330 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | SIG Coverall 1.2x0.9 m |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Connector CAN 15 |
1 x | Motor A30-12 XL Glider |
1 x | Axle for motor A50-L |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | Motor Advance 50-6 |
2 x | Motor ORBIT 20-12 with coolingfan |
1 x | Motor A20-22 L EVO |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Motor A20-20 L EVO |
1 x | 100 Newtons FEMA absorber |
1 x | Strip 1,5x1,5x330 mm |
1 x | IKARUS plane |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Avanti XS Jet , Tricolore Canopy |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Towing hook <3m |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Piston ring for ZG 20 and G240RC |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Piston ring for DA-60 and DA-120 |
3 x | Wing bolts M3 Steel screw blue (2 pcs) |
2 x | Control for forward wheel (MINI) |
2 x | Cockpit aluminium closing |
3 x | Window mounting channel Type H 2.5x0.5 (2 m) |
2 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Q80-13S 20-Pole F3A |
1 x | 22m Fitting barb |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | Miniature brass strap hinge, 1 m |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
2 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | 140 mm rods set for direction control |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | 100 mm rods set for direction control |
1 x | Cockpit metalic closing |
1 x | Cockpit aluminium closing 4.7g |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Motor B50-9L Competition + 6,7:1 |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Clip fixing for wing (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Wheel collar 5 mm Ø (4 uds) |
2 x | Cockpit aluminium closing 5.4g |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | 80 mm rods set for direction control |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Covered closure or fairings |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Window mounting channel 5m |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | 45 mm rods + T patellas set for direction control |
1 x | A50 Backmountset complete V3/V4 |
1 x | A30-M/L/XL Backmountset complete |
1 x | PHASOR RACE 2035/2100 2D |
1 x | PHASOR RACE 2035/4100 1D |
1 x | 102 mm INO spinner (carbon imitation) |
|
8,596.77EUR |