2,900.00EUR

Motor DLE 200cc Premium Muffler
[ROIDLE200PM]


This engine is not toy. For your own safety, please read the manual carefully before operation. DLE is not responsible for all injuries result from the use.
Thank you for purchasing the DLE engine. DLE200 is a opposed cylinder 2-stroke engine designed for paramotor and UAV. It has unique feature with light weight, long life, high power and low vibration. The design of DLE200 does not use the tuned pipe by routine. It improves the engine's power limit and extends the life of the engine with excellent throttle respond and curve. DLE200, with its new design, will offer you unexpected flight experience.
This engine is not a toy! Therefore, all users who are not specifically skilled or trained to perform the operation or flight should stop the dangerous action and be performed following the help of the experienced.
Misuse or inaccurate maintenance may result in damage of engine, injury or death. Installation, trial run and maintain of the engine must be carried out by experienced. DLE will not be liable for any damage or death caused by misuse or inaccurate maintenance.
This is not a certified aircraft engine. User assumes all risk of use and acknowledges by his use that he knows the engine is subject to sudden stoppage. DLE will not be liable for any damage or death caused through the sudden stoppage in the air.
This engine does not have product liability insurance. We cannot assure the nonoccurrence of the engine failure. Using the engine can be dangerous and accidents can result in serious property loss, injuries or death! Never start the engine if you don't want to take the risks.

Type 2 stroke
Bore 55mm
Stroke 42mm
Displacement 200CC Power ( Premium Muffler ) 23HP/8000rpm
( Standard Muffler ) 20HP/7500rpm
Compression Ratio 10:1
Reduction ratio 1:2.7
Transmission Type Belt
Starting Type Electrical Start
Net Weight (without muffler) 10.3 Kg
Standard Muffler Weight 1.1 Kg
Premium Muffler Weight 2.2 Kg
Spark Plug DLE-8A
Petrol 93# 、97#
Alternator Output 14V 1A
Premium Alternator Output 14V 4A
Propeller 1220mm Applicable Pilot Weight (Premium Muffler) 120Kg
Applicable Pilot Weight (Standard Muffler) 80Kg



Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Big Crow DLE-170M
1 x Propeller FALCON 32,5x11 PUSHER Carbono
3 x Small Crow DLE-170M
1 x Motor DLE 430 cc - Paramotors
1 x Motor DLE 200cc Std
1 x Motor DLE 200cc Premium Muffler
1 x Motor A2212/13T
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x ABS Strip 1.0x2.0x1000 mm
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Plasti Dip Liquid Tape 429 ml orange
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x 4 mm M3 red control terminal (4 pcs)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Strip ABS 2.0x3.0x1000 mm
1 x USB HLS prog. interface
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Spray adhesive AEROFIX 2
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x 5 LiPo XH>EH adapter
1 x Cable grommet 9.5 mm (4 uds)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Pin hinge 39x20 mm (10 uds)
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Strip 2,5x1,25x330 mm
1 x Allen wheel collar M3x3
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Black silicone 1,0 qmm wire (50 m)
1 x 20 g tin paste
1 x 1/7 Pilot "Japanese"
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x Strip 1,5x1,5x330 mm
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Lock washer 3.2 mm (20 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x 10 mm Quick clamp_L (6 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Miniature brass strap hinge, 1 m
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x 11 mm Rubber pads (14 pcs)
1 x 140 mm rods set for direction control
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x Quicklock washer 2 mm (10 pcs)
1 x CM-3
1 x Oracover Azul 2 m
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x 1000 ml sealer (DOPE)
1 x 15 mm reinforced hinge
1 x 1/12 Pilot "Tom"
1 x GameCommander USB Universal
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Support XT60 conector (2 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x 1/4 Pilot "Heidi"
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Round Rod 1,25x1000 mm
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 80 mm rods set for direction control
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x 140 mm rods + T patellas set for direction control
1 x ABS Strip 1.5x2.0x1000 mm
1 x Flat washer 3.2 mm (20 pcs)
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Universal Colour Paste deep black 50 g
1 x Flap hinge 33x9 mm (6 pcs)
1 x Round Rod 3,0x1000 mm
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Xplorer1 anemometro
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x M3-M4 rubber washer (8 pcs)
1 x Piloto jet 130 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Copier 2x20 cm pcs
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Vacuum pump 12 CFM
1 x Flat Connector 4.0 mm x 1000 mm
1 x 2,0x50 mm allen screwdriver
1 x Starter 12v (Max 180 and 30ccm)
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Cable S.BUS 3 salidas 100 mm
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Adjustable launching hook
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x TS832 to Gopro AV/Power Cable
1 x T-Motor U7-V2.0 Kv420
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x PIX Hawk with accesories
1 x Floating M3 washer pad (36 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x 75 mm INO spinner (carbon imitation)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x 3,2 mm Prop Adapter M6
1 x Canopy Latch
1 x 10 mm Prop Adapter M12
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Lock nut aluminium M3 (4 pcs)
14,554.04EUR
Manufacturers
Manufacturer Info
DLE Engines
Other products
Languages
Español English
Currencies