59.00EUR

Glases Innovation Plus
[CMINNOVATIONP]



Set de gafas, cristales, funda y trapo
Do you have to wear prescription glasses? Fed up with seeing your buddies turn up at the field with great looking and practical glasses you just can't wear? We have the answer in the form of these stylish prescription model flying sunglasses, which have been especially developed for radio control model use.

At the heart of the design is a polycarbonate frame that houses your prescription lenses; this clips onto a main frame, which in turn houses the coloured shades that simply clip on to a hinged section. These hinges allow you to temporarily turn up the outer lenses in order to closely inspect a model in the pits etc.

Innovation Plus are polarised sunglasses. The polarised cristals greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

The de-centred, scratch resistant lenses have been optically balanced to negate the effects their curvature would otherwise have on your vision. Conforming to US ANSI Z80.3 plus British and European safety standard EN1836, our sunglasses are factory impact-tested, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the CE (European Union standard) compliance mark. The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2) average sunlight; smoked mirror (category 3) bright sunlight; dark smoked (category 4), very bright conditions.

The glasses come with the interchangeable lenses, a cleaning cloth and a superb carry case with belt clip. All frames and the carry case display our 'Model Glasses' logo.

WILL THEY WORK FOR ME? - If you have a prescription (SPH) requirement that's less than plus or minus 4.00, our glasses will work just fine for you. Stronger prescriptions can cause distortion, due to the curvature of the tinted lenses when placed in front of the flat prescription clip. The de-centring calibration loses its effect where stronger prescriptions are required. If you have a requirement greater than plus or minus 4, please do not buy these glasses. Bi-focals, varifocals and prismatic lenses can be added - if in doubt, please consult your optician for advice.

IMPORTANT NOTE
When wearing Innovation Plus, some users may find they cannot see certain types of LCD or other electronic / digital transmitter displays. This is a normal cause of wearing polarised glasses. We recommend using the glasses with the front section flipped up, or the glasses removed, when model trimming prior to use.


few units
few units

Reviews

Customers who bought this product also purchased
Fiberglass plate 350x150x0.5 mm
Fiberglass plate 350x150x0.5 mm

few units
few units

Tape GFK 50 mm
Tape GFK 50 mm

few units
few units

Tape GFK 25 mm
Tape GFK 25 mm

few units
few units

MAX BEC
MAX BEC

few units
few units

Conector FUTABA Servo male  (10 pcs)
Conector FUTABA Servo male (10 pcs)

few units
few units

Conector FUTABA Servo female BLUE silicon (10 pcs)
Conector FUTABA Servo female BLUE silicon (10 pcs)

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Glases Innovation Plus
1 x Glases Ace
1 x Glases Stratus
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Glases Nimbus "Black"
1 x Glases Flitemaster
1 x Ferrita 14x8x5.5 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Straightened rod Ø 1.5 mm x 1500 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Ferrita 17x10x6.5 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 7.0 mm x 1000 mm
2 x Extinguisher CO2 - 2 Kg
1 x Ferrita con funda
1 x Ferrita 27x14x7 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Big Crow DLE-170M
1 x Motor DLE 170 M- Paramotors
1 x Field folding model stand
2 x Angle measurer
1 x Truck-trailer for gliders 720 x 285 mm
1 x WingFix ULTRA Black Edition
1 x Field folding model stand SebArt
1 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 3.0x2.0x330 mm
2 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x ABS tube 18.0x16.0x1000 mm
2 x ABS tube 10.0x8.0x1000 mm
2 x ABS tube 8.0x7.0x1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x ABS tube 5.0x3.0x1000 mm
2 x ABS tube 7.0x6.0x1000 mm
2 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 16.0x14.0x1000 mm
2 x ABS tube 4.0x3.0x1000 mm
1 x ABS tube 3.0x2.0x1000 mm
2 x ABS tube 9.0x8.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
2 x ABS tube 20.0x18.0x1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 3.0x1.0x1000 mm
2 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Vacuum bag, 1200 mm x 50 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x BALSA trip 8.0x8.0x1000 mm
1 x Ballast 700gr OPALE
1 x Rubber profile 6-2 mm 2M
1 x Plasti Dip Liquid Tape 429 ml black
2 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support Pitot JETI
1 x Recessed MPX connector support (6 pcs)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Sun Cover PC 21 XXL (JMB Jets)
2 x Chopped glass fibre strands 3 mm
1 x Glass fabric 25 g (2 m²)
1 x 18m Fitting barb
1 x 102 mm INO spinner (carbon imitation)
1 x Propeller balancer
1 x Regulador Jeti Jes 045
1 x 1/6 Pilot "Tony"
1 x 
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x 1/6 Pilot "John"
2 x CNC FPV Display screen&Transmitter Holder Vertical
1 x 20x200 mm battery rings
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Servo SAVOX SV-1273 TG
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
2 x Servo mounting frame SV-1260MG
1 x Catalog AERO-NAUT 2016
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x Surface Indicator Gauge Small
1 x 1/7 Pilot "Japanese"
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
2 x Angle of incidence meter
1 x 120x60 mm SLH KOVO wheel
1 x 110x55 mm SLH KOVO wheel
1 x Tirpiz Battleship 1:200
1 x 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x 280 cc gasoline fuel tank complet
1 x 115x29 mm (4.50") Type jets aluminium core wheel
1 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x 1/12 Pilot "Tom"
1 x 1/6 Pilot "Buddy"
1 x 25 mm carbon servo arm
1 x 20 mm carbon horn
2 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x 39,0 mm propeller (left propeller)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
2 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x 12 mm mast holder
1 x 38 mm fenders (10 pcs)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x ABS tube 6.0x5.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Chopped glass fibre strands 3 mm
1 x Foam plastic plates (310x210x8 mm)
1 x Carbon plate 1000x500x2,0 mm ECOTECH
1 x Fiberglass plate 350x150x1.0 mm
1 x Foam plastic plates (310x210x3 mm)
1 x GPS Logger Dymond
1 x Albatros ,spare cockpit (Top Model)
1 x SAVOX SH 0255 MG servo
1 x Servo SAVOX SV-1261 MG
1 x Servoarm Aluminium SH-82
1 x Servo SAVOX SV-1260 MG
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x Piñones SAVOX SH-0350
1 x Pin hinge 39x20 mm (10 uds)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Motor ACTRO 28-4-880
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x Program 5v SIO RS 232
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x 15 mm reinforced hinge
1 x ABS Strip 1.5x3.0x1000 mm
1 x 290 mm M4/M4 6.0x4.0 mm shaft ship
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x Propeller balancer
1 x 90x60 mm standart servo cover
1 x Blade Holder (3 blades)
1 x Profile ABS half cane 3x1000 mm
1 x SAVOX SH 1290 MG servo digi
1 x Savox Brushless Servo SC-1251 MG
1 x Servo SAVOX SH 0257 MG
1 x Servo SAVOX SA-1256 TG
1 x Servo SAVOX SA-1258 TG
1 x SAVOX SH 1250 MG servo digi
1 x Savox Brushless Servo SC-1267 SG
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Pin hinge 34x16 mm (10 uds)
1 x Kavan Car 25% nitro 1l
1 x Ciano KAVAN Thin 20g
1 x SCHARNHORST Battleship 1:200
1 x Baseplate servo
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Glass fabric 390 g/m² (silane, twill) 100 cm x 20m
1 x PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x KIRA 480-31 5,2:1
2 x Straightened rod Ø 2.5 mm x 1000 mm
1 x JIVE 80+HV Esc
1 x Jet Pipe 160N-250N (120/130 mm)
1 x Fod Guard 73x32 mm
1 x KingTech Turbineoil 1L
1 x Exhaust K45TP
1 x Battery LiFe -3000/25C-3S 9.9V
1 x KingTech K45TP G4 Turboprop
1 x Release film 100 cm x 50 m
2 x Fiberglass 280 g/m² 5000x1000 mm
1 x Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
2 x Fiberglass 25 g/m² 5000x1270 mm
1 x Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m
2 x Carbon plate 350x150x2.5 mm
1 x Carbon plate 500x400x2.0 mm ISOTECH
1 x Gearbox KPG25- 5,2:1pinion
1 x FAN KOSMIK
1 x KIRA 400-34
1 x Support Flush MPX Conector (6 pcs)
1 x Turbine HORNET 85 SE
1 x Fod Guard 94x32 mm
1 x Turbina KINGTECH K120 G4
1 x KIRA 480-34
1 x Aceite AEROSHELL 500 SE Turbina 0,9 kg
1 x KIRA 600-17
1 x Esc KOSMIK 200+ HV
1 x JIVE 100+LV Esc
1 x Adapter SPEED 480
1 x KIRA 500-26 6,7:1
1 x KIRA 500-30 6,7:1
1 x Gearbox KPG27 5,2:1
1 x KIRA 480-26 5,2:1
1 x KIRA 500-36 6,7:1
21,319.65EUR
Manufacturers
Languages
Español English
Currencies