9 x | 1/4 Pilot "Heidi" |
11 x | 1/10 Pilot "Jack" |
11 x | 1/6 Pilot "Buddy" |
21 x | Piloto Jet "Green" 1/6 Scale |
9 x | 1/12 Pilot "Tom" |
11 x | Pilot "Duke" Legends Series (Slimline) |
6 x | Straightened threaded rod M2-1m |
5 x | Straightened rod Ø 4.0 mm x 1000 mm |
9 x | 1/4 Pilot "Mike" |
4 x | Angled clevis with threaded rod M3 |
5 x | A/C quality beech plywood 600x300x1.5 mm |
5 x | ABS Strip 1.0x3.0x1000 mm |
3 x | 5 line servos wire black (1 m) |
4 x | Pilot JAN 1/4 Saiplanes |
5 x | Birch plywood plate 600x300x3.0 mm |
2 x | SE Ring 400 mm (2 pcs) |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Cabling for Fox MDM1 wings |
4 x | Propeller balancer |
2 x | Aluminium red ball links M3 V1 (10 pcs) |
4 x | ABS Strip 1.0x2.0x1000 mm |
8 x | Banna gold connector 2,5 mm (100 M/F pairs) |
6 x | Horn mando long (2 pcs) |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
7 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
3 x | Control horn long w/ball |
5 x | Horn 6/27 with M3 Bearing |
3 x | ABS I Strip 10x5x1000 mm |
8 x | Glases Aspen |
8 x | Pilot "Adolf" Legends Series (Slimline) |
6 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | UBEC 6A KAVAN |
14 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
4 x | Connectors banna oro 4 mm (M/F) (ultralight) |
6 x | Horn DU-BRO 1/2 (2 pcs) |
2 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
9 x | Bag connector 2 mm |
3 x | Round Rod 4,0x1000 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
4 x | Connector Sub-D 2+5 Female |
7 x | 1/10 Pilot "Jimmy" |
4 x | BALSA trip 2.0x2.0x1000 mm |
9 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
4 x | Horn micro type4 Ø 0,5 (2 pcs) |
3 x | Cable coupler M2x66 (2 uds) |
7 x | Conector JR Servo female (10 pcs) |
12 x | PVC 0,14 qmm servos wire Graupner (100 m) |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
3 x | Horn 5/10 with M2 Bearing |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
4 x | Brass control horn M2 large for wire (2pcs) |
4 x | CC 01 |
5 x | Towing hook <3m |
3 x | DPS Switch JR/JR |
5 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Balsa panel 2.0x100x1000 mm |
7 x | Protective open Cover for wires Ø 13 mm 1000 mm |
11 x | Connectors banna oro 4 mm (M/F) |
7 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
5 x | 20 mm carbon horn |
4 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
4 x | Red silicone 1,0 qmm wire (50 m) |
2 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
4 x | Round Rod 1,5x1000 mm |
7 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | ABS Strip 1.5x3.0x1000 mm |
5 x | Brass control horn M4 long for wire (4 pcs) |
2 x | Conector FUTABA Servo female (10 pcs) |
9 x | Piloto Jet "Red" 1/6 Scale |
3 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
4 x | APM2.6 Power module with 5.3V DC BEC |
6 x | Balsa panel 4.0x100x1000 mm |
3 x | Balsa panel 1.5x100x1000 mm |
4 x | Horn 6/20 with M3 Bearing |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
6 x | Silicon black 2,5 qmm cable ( 25 m) |
2 x | Pilot "Ice Man" (Slimline) |
6 x | Banna gold connector 2,5 mm (M/F) |
4 x | 30 cm DEANS female connector |
2 x | 5 mm M2 variable inclined horn |
6 x | 1/6 Pilot "Garry" |
2 x | CM-3 |
5 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
3 x | Glases Nimbus "Black" |
2 x | Extra long horn 60x30 |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
4 x | 1/12 Pilot "Langley" |
5 x | PVC 0,08 qmm Futaba servos wire (5 m) |
4 x | Black silicone 0,25 mm² wire (25 m) |
9 x | Pilot "Dick" Legends Series (Slimline) |
5 x | Connectors DEANS 4 pins (1 pair) |
3 x | 6 mm red aluminium threaded horn with patella |
2 x | 6 mm M3 variable horn |
4 x | Field folding model stand SebArt |
5 x | 5 mm M2 variable horn |
4 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
3 x | 30 cm BEC cable (male) |
8 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | 5 LiPo XH>EH adapter |
6 x | Protective Cover for wires Ø 10 mm 1000 mm |
3 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
7 x | Horn 13,5x16 mm (2 pcs) |
4 x | 3 LiPo XH>EH adapter |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
4 x | 1/6 Pilot "Tony" |
5 x | 6 mm M3 variable inclined horn |
3 x | Double conector with JR adapter and 200 mm extension |
3 x | ABS Strip 1.5x4.0x1000 mm |
7 x | 6 mm Quick clamp_S (10 pcs) |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
6 x | Civilian pilot "Gramps" size 9cm (Slimline) |
4 x | Balsa panel 6.0x100x1000 mm |
7 x | Tow hook for tug |
4 x | Glases Stratus |
4 x | Fully Threaded Steel Rod M2,5 (2 uds) |
10 x | Conector JR Servo male (10 pcs) |
6 x | BALSA triangular 15x15x1000 mm |
4 x | 30 cm BEC cable (female) |
5 x | Protective Cover for wires Ø 15 mm 1000 mm |
15 x | 1/6 Pilot "John" |
3 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
6 x | Balsa panel 10x100x1000 mm |
7 x | Pilot "Goose" (Slimline) |
3 x | Dean "T" - Futaba Adapter |
2 x | Marker ties (20 pcs) |
3 x | 1 m servo "Premium" wire (white/red/blue) |
3 x | Kwik link AL M4 con Clip (2 pcs) |
5 x | ABS I Strip 20x10x1000 mm |
4 x | Balsa panel 2.5x100x1000 mm |
3 x | Brass ball links BS M3 V1 (10 pcs) |
4 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
11 x | SIMtransmitter 6 Mode 2 |
6 x | Tape GFK 50 mm |
5 x | Horn 6/35 with M3 Bearing |
6 x | Civilian pilot "G-Man" size 9cm (Slimline) |
3 x | Round Rod 2,0x1000 mm |
9 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
8 x | Cable Cargador FUTABA |
7 x | Civilian pilot "Curt" size 9cm (Slimline) |
4 x | SE Ring 450 mm (2 pcs) |
6 x | Protective Cover for wires Ø 20 mm 1000 mm |
5 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
4 x | Horn for flap control (1 pcs) |
8 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
6 x | BALSA trip 3.0x3.0x1000 mm |
9 x | Connectors banna oro 0,8 mm (M/F) |
4 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
5 x | SE Ring 330 mm (4 pcs) |
3 x | Cable coupler M2,5 (2 pcs) |
8 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
3 x | Medidor ángulos y/o incidencias |
5 x | Surface Indicator Gauge Small |
3 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
7 x | JR silicone servo wire 0,35 qmm / 5m |
5 x | Protective Cover for wires Ø 6 mm 1000 mm |
4 x | BALSA trip 4.0x4.0x1000 mm |
4 x | Adjustable brass horn threaded M3 |
4 x | Horn 5/20 with M2 Bearing |
4 x | Green silicone 0,25 mm² wire (25 m) |
7 x | Pilot "Anthony" (Slimline) |
7 x | Fixed launching hook |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
3 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
4 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Brass control horn M4 short for wire (4 pcs) |
6 x | Horn 16,5x20 mm (2 pcs) |
2 x | Cabel charger transmitter GRAUPNER |
9 x | 2 mm male connector (2 pcs) with safety connector |
11 x | Connectors DEANS (T) micro |
9 x | Adjustable launching hook |
3 x | Motor A2212/13T |
12 x | Connectors banna oro 3 mm (M/F) |
4 x | ABS Strip 1.5x2.0x1000 mm |
7 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
6 x | PVC 0,08 qmm Graupner servos wire (5 m) |
4 x | Cable set PREMIUM, fuselage/wing |
8 x | 1/6 Pilot "Cindy" |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
5 x | SE Ring HACKER 300 mm (2 pcs) |
6 x | Protective Cover for wires Ø 6 mm 1000 mm |
4 x | ABS Strip 1.5x8.0x1000 mm |
3 x | Horn 20x28,5 mm (2 pcs) |
3 x | Propeller balancer |
3 x | 20x1000 mm Ring Strap Back To Back |
7 x | 30 cm MULTIPLEX female connector |
2 x | Cable coupler M3 (10 uds) |
2 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
3 x | ABS Strip 1.0x5.0x1000 mm |
6 x | Angle measurer |
4 x | PVC 0,14 qmm servo wire Futaba (5 m) |
3 x | Connectors DEANS (T) |
6 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
3 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
4 x | Connector Sub-D 2+5 Male |
12 x | Connector CAN 15 |
8 x | Civilian pilot "Pamela" size 9cm (Slimline) |
4 x | Cable set PREMIUM , fuselage/wing one4one |
4 x | ABS Strip 1.0x4.0x1000 mm |
8 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
7 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
6 x | Conector FUTABA Servo male (10 pcs) |
3 x | Horn F3A de Titanium 16 mm (2 units) |
6 x | Cable coupler M2 (10 uds) |
5 x | SE Ring 250 mm (2 pcs) |
9 x | Connectors banna oro 2 mm (M/F) |
5 x | Silicon red 1,0 qmm cable ( 25 m) |
3 x | Cable with accesories |
2 x | Glases Ace |
5 x | Conector JR Servo female (10 pcs) |
9 x | Conector JR Servo male (10 pcs) |
5 x | Strip 1,5x1,5x330 mm |
9 x | 1/12 Pilot "Cougar" |
5 x | CC 03 |
9 x | Towing hook |
5 x | Glases Innovation Plus |
2 x | Tape GFK 38 mm |
2 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
5 x | Connectors banna oro 6,0 mm (M/F) |
12 x | Connectors banna oro 3,5 mm (M/F) |
4 x | 6 mm blue aluminium threaded horn with patella |
4 x | CC 05 |
8 x | Beech dowels 3.0 x 1000 mm |
5 x | Glases Flitemaster |
5 x | Glases Moritz |
8 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
5 x | Strip ABS 2.0x8.0x1000 mm |
4 x | SE Ring 350 mm (2 pcs) |
7 x | Strip ABS 2.0x5.0x1000 mm |
7 x | 1/12 Pilot "Fighter" |
7 x | Connectors banna oro 8,0 mm (M/F) |
4 x | Round Rod 5,0x1000 mm |
4 x | Round Rod 1,0x1000 mm |
7 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | Kwik link AL M3 con Clip (2 pcs) |
6 x | 2 mm female connector (2 pcs) with safety connector |
13 x | Conector Servo female 4 pines |
7 x | 1/7 Pilot "Japanese" |
3 x | Field folding model stand |
2 x | Balsa panel 3.0x100x1000 mm |
2 x | Cable coupler M3 (10 uds) |
5 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
4 x | Brass rod Ø 0.5 mm x 1000 mm |
4 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
5 x | Green silicone 0,25 qmm wire (50 m) |
7 x | 10 mm Quick clamp_L (6 pcs) |
4 x | BEC 3A FOXY |
4 x | SE Ring 300 mm (2 pcs) |
7 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
7 x | Cable control set |
2 x | Tape GFK 25 mm |
6 x | Connectors banna gold 5,5 mm (M/F) |
5 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
8 x | Strip ABS 2.0x10.0x1000 mm |
2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
9 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
7 x | Balsa panel 5.0x100x1000 mm |
6 x | SE Ring 200 mm (2 pcs) |
3 x | 2 LiPo XH>EH adapter |
6 x | Connectors banna oro 2 mm (M/F) (ultralight) |
5 x | quality beech plywood BIRCH 600x300x2.0 mm |
5 x | Aluminum Bayonet / strongal D25 mm / 1 m |
5 x | 4 LiPo XH>EH adapter |
4 x | 20x200 mm battery rings |
5 x | Brass control horn M2 short for wire (2 pcs) |
3 x | Circlick securite |
7 x | Conector BEC female (10 pcs) |
2 x | Kwik link with arm M3xM2xL24 |
1 x | Cinta Goldfix 1m |
3 x | Strip 2,0x2,0x330 mm |
6 x | Beech dowels 2.0 x 1000 mm |
5 x | Horn mando small (2 pcs) |
4 x | Horn DUBRO 1/2A |
4 x | ABS Strip 1.5x6.0x1000 mm |
3 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
2 x | Round Rod 2,5x1000 mm |
5 x | Brass control horn M4 short for wire (10pcs) |
2 x | Black large kwik link (10 pcs) |
1 x | Cable coupler M2 (10 uds) |
6 x | BALSA trip 5.0x5.0x1000 mm |
4 x | Angle of incidence meter |
4 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
4 x | Strip ABS 2.0x3.0x1000 mm |
8 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
5 x | Glases Nimbus |
2 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
3 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
11 x | Round Rod 6,0x1000 mm |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
5 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
4 x | BALSA triangular 10x10x1000 mm |
3 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
3 x | Blue silicone 0,5 qmm wire (50 m) |
3 x | Truck-trailer for gliders 720 x 239 mm |
3 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
4 x | Truck-trailer for gliders 720 x 285 mm |
4 x | Extra-long adjustable aluminium control horn 2,8x34 |
6 x | Conector BEC male (10 pcs) |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
6 x | Protective Cover for wires Ø 3 mm 1000 mm |
3 x | 6 mm aluminium horn with patella |
4 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
4 x | Horn 5/15 with M2 Bearing |
3 x | Round Rod 3,0x1000 mm |
8 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
3 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Kwik link with arm M5xM2,5xL30 |
2 x | 4 mm M3 red control terminal (4 pcs) |
3 x | Brass control horn M2 long for wire (10pcs) |
3 x | Strip 3,5x1,75x330 mm |
2 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | Albatros ,spare cockpit (Top Model) |
5 x | Red 3m5 mm connector holder |
5 x | MPX Sub-D Adaptor |
5 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
8 x | Connectors MPX male (PIN double) |
2 x | Wing connector 8pin with pin strip, plug & socket |
6 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Gold antispark 4 mm plug |
5 x | MPX housing with flange (4 pcs) |
9 x | XH female balance (5S) connector (2 pcs) |
2 x | Protector Connector MPX (1 pair) |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
1 x | Silicone red 1,5 qmm wire ( 25 m) |
2 x | Gracia Maxi ARF, spare wings (Top Model) |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace) |
3 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | 45 mm rods set for direction control |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
3 x | SPS 70V 140/280 A |
3 x | Canopy Astra |
3 x | Avia (Top Model) |
2 x | Pine wood slat 2.0x2.0x1000 mm |
3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
6 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | ABS tube 5.0x4.0x156 mm |
3 x | Protector Connector Dean-T (1 pair) |
3 x | ODYSSEY HONDA ARF 2190 mm |
1 x | Ventus 2cx 4.5 m de Luxe |
5 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Plastic caps for AIR BURTS (30 pcs) |
5 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler M2 (10 uds) |
6 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
4 x | PARTENAVIA 2020 mm ARF with Flaps |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Strip 2,5x1,25x330 mm |
2 x | Aero-Master Wings (Aero-naut) |
3 x | Gracia (Top Model) |
6 x | Kontronik connector (10 connectors, 5 pairs) |
4 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Horn with ball 40x30 |
1 x | Ion Pro, Fuselage (JP Model) |
2 x | Extension silicon 35 cm (Futaba) |
1 x | DPS Switch Ampere |
4 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | 2,4x1000 mm 2:1 red termoretract tube |
8 x | Connectors MPX female |
5 x | Magnetic Connect locking system |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
4 x | B4-0 rocket charges (6 pcs) |
4 x | Carbon fiber flat 1000x3.0x1.0 mm |
3 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
6 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
3 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
4 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Ring 320 mm length (5 pcs) |
2 x | ODYSSEY CUST ARF 2190 mm |
2 x | 290x4 mm M4 shaft ship |
6 x | Beech dowels 4.0 x 1000 mm |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Initior Transmitter FTX2 Wireless |
3 x | Copper lacquer wire Ø0,2 mm (5 m) |
4 x | Small control horn with bearing (2 pcs) |
3 x | 3l Smoke oil |
1 x | DH82 Tiger Moth ARC Scale 1:3.3 |
1 x | Extension silicon 30 cm male (Futaba) |
5 x | OBECHI sheet 2.0x3.0x1000 mm |
3 x | X-RAY Micro QR (Fuselage with canopy) |
6 x | Small aluminium horn gold (2pcs) |
3 x | PIX Hawk with accesories |
2 x | Couple M4 for wire (10 pcs) |
3 x | 100 mm rods + T patellas set for direction control |
9 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Profile ABS Square 2 x 1000 mm |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
11 x | XT-30 connector (pair) |
2 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
2 x | ASPIRE Navy ARF 2.000 mm |
1 x | Race Outboard MERCURY type A |
9 x | Connectors MPX black female |
2 x | ABS tube 3.0x2.0x330 mm |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Cable grommet Ø 5 mm (4 uds) |
2 x | GRAFAS MAXI ARF |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
3 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | MAX BEC 2D plus EX |
5 x | Spikes Band (5 m) |
11 x | XH female balance (6S) connector (2 pcs) |
2 x | Extension silicon 50 cm (Futaba) |
1 x | ABS tube 14.0x10.0x1000 mm |
4 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Long adjustable control horn with bearing |
2 x | ABS tube 12.0x10.0x1000 mm |
2 x | Clip mini fixing for wing (2 pcs) |
3 x | XH LiPo extension lead |
4 x | Rudder forward 80x28 "type Kato" |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
4 x | Silicone black 6,0 qmm wire (25 m) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
6 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Carbon fiber rod 20 mmx1000 mm |
3 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
5 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | 12 mm dogdrive props |
1 x | Clip fixing for wing (2 pcs) |
3 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
4 x | Straightened rod Ø 0.8 mm x 1000 mm |
2 x | X-RAY Micro QR (Rudder) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Hacker X-Pro USB interface V2 |
3 x | 29,0 mm propeller (rigth propeller) |
3 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
5 x | Optotronix Aurora Plug |
1 x | 140 mm rods set for direction control |
2 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
5 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
4 x | Lite Plywood panel 600x300x3.0 mm |
3 x | SHK 4000 mm Scale 1:4.25 |
4 x | Blue smoke canister 100 g |
2 x | "S" set for boats |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | Silicone black 2,5 qmm wire ( 1 m) |
3 x | AX-60 starters (5 pcs) |
3 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
4 x | ABS tube 16.0x14.0x1000 mm |
4 x | 4,8x1000 mm 2:1 red termoretract tube |
3 x | F1 Prop Cap Can (Fuel Container Conection) |
2 x | F9F COUGAR Red ARF 1.562 mm |
1 x | Navaho new design (Top Model) |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
6 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | MAX BEC |
3 x | Glow filter |
2 x | ABS tube 4.0x3.0x1000 mm |
10 x | Connectors MPX male |
3 x | ABS tube 7.0x5.0x1000 mm |
3 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Kobuz 5000 mm (Airwold) |
2 x | Long adjustable control horn 3x34 |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Extension 2/3 lipos JST/C |
4 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horns indoor |
3 x | Smoke set "Glider" |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
3 x | ABS angle 2,0x2,0x1000 mm |
1 x | Extension PVC 150 cm (Graupner) |
3 x | USB interface ALTIS |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
3 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Long Switch On/Off micro |
4 x | Fiberglass motor-holder for electric motors |
1 x | Allen wheel collar M4x6 |
3 x | 11 mm Rubber pads (14 pcs) |
3 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
2 x | ASK 21 6.8m |
2 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
9 x | XH female balance (8S) connector (2 pcs) |
4 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
2 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
2 x | Extension silicon 50 cm (Graupner) |
2 x | Parachute expulsion foam |
2 x | Gold antispark 5,5 mm plug |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace) |
1 x | Pine wood slat 10x10x1000 mm |
2 x | 140 mm rods + T patellas set for direction control |
2 x | Opto Gas Engine Kill Switch |
5 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
2 x | 800TVL CMOS camera for FPV |
1 x | Z type of cable coupler Ø 2 (2 uds) |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
3 x | Silicone black 0,5 qmm wire ( 25 m) |
3 x | Pin hinge 26x11 mm (10 uds) |
1 x | Glider KNIRPS |
4 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
3 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
5 x | Silicone black 1,5 qmm wire ( 25 m) |
3 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Oracover Black 2 m |
4 x | Male Prolonger TP 4/5S |
8 x | XH female balance (2S) connector (2 pcs) |
1 x | Canopy Sweet / Siesta |
2 x | Linden wood slat 3.0x3.0x1000 mm |
3 x | PPM Encoder Module |
1 x | 10 mm portholes (10 pcs) |
1 x | X-RAY Micro QR (Elevator) |
3 x | Fournier RF-4D |
3 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | ABS tube 9.0x7.0x1000 mm |
4 x | Silicone red 2,5 qmm wire ( 1 m) |
2 x | CNC FPV Display screen&Transmitter Holder Vertical |
5 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | ODYSSEY BLACK Eagle ARF 2190 mm |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
4 x | Electric Landing Gear ODYSSEY |
4 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
2 x | L-Connector 1.0 mm x 1000 mm |
2 x | Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace) |
1 x | Q-12 X-light 2000 mm Electric |
1 x | 10 mm dogdrive props |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
4 x | XT-90 connector (pair) |
1 x | Gracia Maxi ARF, bags (Top Model) |
6 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Small aluminium horn red (2pcs) |
3 x | Long horn 50x26 |
2 x | Fox MDM 1 4000 mm DeLuxe |
9 x | PCARD Wireless System |
1 x | Fascination 3600 mm ARC |
7 x | XH female balance (3S) connector (2 pcs) |
6 x | XT-60 connector (female) |
2 x | Multi-adapter balancer JST/C - TP |
4 x | Straightened rod Ø 5.0 mm x 1000 mm |
4 x | Medium extra-strong control horn with bearing 2,8x24 |
2 x | Ø 38 mm fiberglass motor-holder for electric motors |
3 x | VAGABOND 1500 mm ARF V2 (Red) |
7 x | Rudder forward 70x28 "type Kato" |
1 x | Antenna holder bracket double |
3 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Small aluminium horn blue (2pcs) |
6 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Regulador NAVY 540R |
5 x | Connectors MPX female (PIN double) |
3 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | Allen wheel collar M3x3 |
3 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
2 x | Monokote PLATINO metalizado (1.8x0.65m) |
3 x | 1,2x1000 mm 2:1 red termoretract tube |
6 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
11 x | XH male balance (6S) connector (2 pcs) |
1 x | La Capitania di Venetia 1:50 |
3 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | BIG MOSNTER |
6 x | SlowFlyer control horn (3 pcs) |
1 x | Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace) |
9 x | Connectors MPX black male |
1 x | Split M1,2x10 (10 pcs) |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
2 x | Spinner propeller pleg. 38 mm / 6,0 mm |
2 x | Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace) |
12 x | XH male balance (5S) connector (2 pcs) |
5 x | Horn with ball 55x40 |
7 x | Straightened rod Ø 3.0 mm x 1000 mm |
3 x | ODYSSEY Blue FANTASY ARF 2190 mm |
4 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Bidule 111 3000 mm |
4 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
2 x | BABY glider (Aero-naut) |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
6 x | 15 mm reinforced hinge |
2 x | ODYSSEY Red/White ARF 2190 mm |
4 x | USB HLS prog. interface |
5 x | Red smoke canister 100 g |
3 x | Straightened rod Ø 4.5 mm x 1000 mm |
4 x | Green smoke canister 100 g |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Ion Pro, Canopy (JP Model) |
6 x | White silicone 0,25 qmm wire (150 m) |
1 x | Swift S1 De-luxe 3.140 mm |
2 x | Squared carbon wing joinner 5x5x220 mm |
3 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
5 x | Straightened rod Ø 0.5 mm x 1000 mm |
3 x | Indoor hinge with servo arm integraded |
7 x | Straightened threaded rod M3 - 1m |
3 x | Focke Wulf FW-190A-8 93" (2362 mm) |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Wire easy tensioner (silver) |
1 x | DG-303 ACRO 3750 mm, canopy |
2 x | DYMOND VTX UBS Programming adapter |
1 x | 28x10 BIELA propeller |
3 x | ABS tube 10.0x8.0x1000 mm |
2 x | Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace) |
6 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
4 x | LS-8 GFK 6m Glider |
4 x | Small Crow DLE-170M |
4 x | White silicone 0,25 mm² wire (25 m) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
3 x | Y-Hose connector 3-3-3 mm |
1 x | Aero-Master Cabine (Aero-naut) |
2 x | SAVOX SH 0255 MG servo |
3 x | Smoke set "S" |
3 x | 18 mm wing servo holder |
1 x | Spare white 38-45 mm spinner |
4 x | Motor DLE 200cc Premium Muffler |
1 x | ABS tube 18.0x16.0x1000 mm |
2 x | ABS tube 7.0x6.0x1000 mm |
2 x | HBC 10035-3 32-Bit |
6 x | XH male balance (3S) connector (2 pcs) |
9 x | Towing hook |
6 x | XH male balance (8S) connector (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | 75 mm |
10 x | XH male balance (4S) connector (2 pcs) |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
3 x | Straightened rod Ø 2.5 mm x 1000 mm |
4 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Black 2,4 GHz antenna exit guides (2 pcs) |
5 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Pushrod greyline 4/3 with coupler M3 |
2 x | Rigid coupling brass Ø 5 mm L: 25 mm |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
2 x | White smoke canister 100 g |
4 x | Quick hose connector 4-4 mm |
2 x | PVC transparent battery termo-retract 51 mm (1 m) |
3 x | 25 mm reinforced hinge |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
7 x | Balsa panel 1.0x100x1000 mm |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | ABS tube 9.0x8.0x1000 mm |
2 x | Ventus 2cx 4.5 m Sapare Fuselaje |
5 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | DLE Ignition 111/120/170 |
2 x | ABS tube 5.0x4.0x1000 mm |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Surprise XII Rudder (Freudenthaler) |
3 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | SATORI 2 PRO V C64 F5J |
7 x | Black silicone 1,0 qmm wire (50 m) |
4 x | "S" set for planes |
3 x | Small pinned hinge (12 uds) |
1 x | wire tensioner (red) |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
3 x | 6,4x1000 mm 2:1 green termoretract tube |
2 x | Swift 5050 mm (Airwold) |
2 x | Spinner propeller pleg. 40 mm / 3,17 mm |
1 x | FESTO connector M7 barb fitting 4mm |
2 x | Y-Hose connector 6-6-6 mm |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
2 x | Check valve quick hose connector 4-4 mm |
1 x | Aero-Master Fuselage (Aero-naut) |
2 x | 33,0 mm propeller (left propeller) |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
2 x | Silicone black 0,75 qmm wire ( 25 m) |
2 x | Profile ABS Square 4 x 1000 mm |
1 x | Kontronik ProgUnit |
2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Landing gear strap large (4 uds) |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
2 x | AX-60 starters (5 pcs) |
3 x | 33,0 mm propeller (rigth propeller) |
9 x | XH female balance (4S) connector (2 pcs) |
4 x | A/C quality beech plywood 1520x750x3.0 mm |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
3 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Strut Set ASPIRE (without wheels) |
2 x | 19 mm 2:1 black termoretract tube |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
3 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
2 x | Magnetic Interruptor MULTIPLEX |
1 x | Servo TOPMODEL DS1413 T |
2 x | Fan metalic 21 mm |
1 x | RH long aluminium horn (2pcs) |
4 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
2 x | Glidder Mü13e (Bergfalke) |
1 x | Mounting base Ms 12 mm |
4 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
4 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
3 x | ABS tube 8.0x7.0x1000 mm |
3 x | MAX BEC 2 |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | PARTENAVIA 2020 mm ARC with Flaps |
3 x | Micro flex hinge (12 uds) |
1 x | Alu-Star 6V electronic componets |
2 x | Anchor 50 mm (2 uds) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | FOAM - CURE™ (24g) |
2 x | Nose leg 155 mm with wheels 70 mm |
7 x | XH female balance (7S) connector (2 pcs) |
4 x | 50 mm servo arm with bearing (2 pcs) |
8 x | XH male balance (9S) connector (2 pcs) |
5 x | XH female balance (9S) connector (2 pcs) |
7 x | MPX Support (2 pcs) |
8 x | XH male balance (7S) connector (2 pcs) |
4 x | 40 mm servo arm with bearing (2 pcs) |
4 x | Ventus 1:4 set of instruments |
6 x | XT-60 connector (male) |
3 x | Male/Female prolonguer for Balancer Thunder Power 6S |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | Battery LiPo TATTU 1300 mAh 3S 11,1V 75C |
3 x | 4,8x1000 mm 2:1 black termoretract tube |
5 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | 45 mm rods + T patellas set for direction control |
5 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | Bird (Aero-naut) |
4 x | Extension 5 lipos JST - JST/C |
3 x | MPX Support |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
2 x | Quadcopter Q50 Kit Carbon Fiber |
2 x | P-51D 89", Electric retract Landing gear |
1 x | DUPLEX Satellite receiver Rsat 900 |
2 x | White smoke bombs AX-18 (5 pcs) |
1 x | Carbon plate 350x150x4.0 mm |
5 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Bidule 111 3000 mm Canopy |
5 x | Silicone red 4,0 qmm wire ( 1 m) |
1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
2 x | Spinner propeller pleg. 38 mm / 5,0 mm |
5 x | Profile ABS Square 3 x 1000 mm |
1 x | Micro control horn (2 pcs) |
1 x | Tap FESTO 4-4 mm |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 13 mm wing servo holder |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
3 x | Profile ABS Square 1 x 1000 mm |
3 x | 65 mm mini servo cover |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
3 x | 1000 ccm complete gasoline fuel tank |
5 x | Red 4 mm connector holder |
8 x | XH male balance (2S) connector (2 pcs) |
5 x | 89 mm double servo arm with bearing (2 pcs) |
2 x | Fox MDM 1 6000 mm |
5 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
2 x | 50x45 mm micro-mini servo cover |
2 x | LUNAK 4,00 m |
3 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
2 x | Coupling for 3 mm axis |
3 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Lead with adhesive (2 pcs) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Elevator VENTUS 2cx 4.5m |
4 x | Blue smoke canister 140 g |
5 x | Spinner propeller pleg. 40 mm / 4 mm |
2 x | Remolcador "Jonny Hafenschlepper" |
3 x | NF-1 RC set |
6 x | White smoke canister 140 g |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Ion Pro, Wing joiner (JP Model) |
4 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | ABS tube 3.0x2.0x1000 mm |
2 x | SOLOFOX 5m Voll-GfK |
3 x | Fox 4000 mm (Airwold) |
2 x | Glider Ka 7 Red (2540mm) |
3 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Small adjustable control horn with bearing |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | ALU-STAR Digi double servo arm |
2 x | PIN Connector female (100 pcs) |
1 x | MYSTIQUE 2.9 m ARF |
3 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | SHK 4000 mm Scale 1:4.25, V-Tails |
5 x | L-Connector 4.0 mm x 1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
3 x | Straightened rod Ø 1.5 mm x 1000 mm |
3 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | White aluminium 230 mm landing gear |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
2 x | Boat with oars 110 mm |
2 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
3 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
3 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Fox MDM 1 4000 mm Std. |
1 x | Life guard Ø 35,0 mm (2 pcs) |
3 x | Round Rod 1,25x1000 mm |
4 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
4 x | Electric rocket starters (6 pcs) |
2 x | Servo SAVOX SA-1256 TG |
1 x | Fiberglass plate 620x540x0,2 mm |
2 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
2 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
2 x | TrainerCord (master-learner) |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Power supply NT 25 Amp. |
4 x | MPX screwable clips (5 pcs) |
2 x | ABS tube 20.0x18.0x1000 mm |
3 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Strut Set HAWKER HUNTER 1:5,8 (without wheels) |
1 x | Spinner propeller pleg. 36 mm / 5,0 mm |
4 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Cleat 10 mm (2 pcs) |
1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
2 x | Extension Arm for Carburetor |
3 x | White smoke bombs AX-60 (5 pcs) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
5 x | 38 mm fenders (10 pcs) |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Big Crow DLE-170M |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | P-47 Electric Landing gear complet (CY model), |
1 x | NF-3X-350 set |
3 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | LA-7 Electric Landing gear complet (CY model) |
2 x | 2,4x1000 mm 2:1 green termoretract tube |
3 x | White smoke bombs AX-9 (10 pcs) |
1 x | DUPLEX R7 receiver REX Assist |
2 x | Fuel Fittings-Blue |
1 x | Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack |
3 x | JETImodel SINGLE BEC |
4 x | CC 11 Conector |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
3 x | Spare white 30-36 mm spinner |
2 x | Smoke Oil Blue 5 l |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
3 x | Silicone red 0,75 qmm wire ( 25 m) |
2 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | Housing Ø 4 mm (2 pcs) |
1 x | Ancla Hist. 67 mm (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
4 x | FESTO connector M7 Quick 4 mm |
2 x | Motor DLE 430 cc - Paramotors |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | DPSI Ampere battery backer |
3 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | ABS angle 10,0x10,0x1000 mm |
1 x | 28 mm turnbuckle |
4 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | USB Mini Camera endoscope |
1 x | Male connector for 10 pines AWG |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
3 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
4 x | MPX screwable clips (4 pcs) |
1 x | Strut Set ODYSSEY (without wheels) |
3 x | Spinner propeller pleg. 30 mm / 5,0 mm |
2 x | 36,0 mm propeller (rigth propeller) |
4 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | 250 mm / 16 mm Airbrakes |
2 x | Birch plywood plate 600x300x4.0 mm |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
4 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Antenna 50 mm (2 uds) |
3 x | Spinner propeller pleg. 45 mm / 6,0 mm |
2 x | Snap short M2 (10 uds) |
2 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
2 x | Extension 5 lipos JST/C |
3 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Focke Wulf FW-190A-8 93", Electric retract Landing gear |
2 x | Set freno para ruedas Dia. 127 mm |
3 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Valvoline SynPower 2T, 1 Litre |
2 x | 28x5 mm wires output (2 pcs) |
3 x | U Profile ABS 3,0x6,0x1000 mm |
2 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | 290 mm M5 Prop shaft |
2 x | 18m Fitting barb |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Capstan of plastic 88x30x36 mm |
4 x | SLICK 360-A 104" (2640 mm) |
2 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Electric Landing Gear GALEB G4 |
3 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
3 x | 1000 cc gasoline fuel tank complet |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Kardan Black (without pinions) |
3 x | ODYSSEY Yellow, Set Elevators |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | THERMIK XL 4000 mm |
1 x | ODYSSEY Yellow ARF 2190 mm |
2 x | Electric spoiler 250 mm (2 pcs) |
1 x | DUPLEX R6 receiver REX Assist |
1 x | EXTRA 330L 35% hardware pack (Precision Aerobatics) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
3 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Servo SAVOX SA-1258 TG |
1 x | PROFI Box JETI |
2 x | T-Hose connector 3-3-3 mm |
2 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
1 x | Spinner propeller pleg. 40 mm / 2,0 mm |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Mahagoni 1.0x100x1000 mm |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
3 x | Housing Ø 11 mm (20 pcs) |
1 x | Battery E-Flite 150 mAh 1S 3,7V 45C for WHIPIT |
2 x | Vasa model Catapult |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
2 x | 39,0 mm propeller (rigth propeller) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | wooden stairs (kit) 70 mm |
2 x | Spinner propeller pleg. 38 mm / 6,0 mm |
2 x | Super GALEB G-4 Camuflage ARF 1.751 mm |
2 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | TopFuel LiPo 25C-ECO-X 1800mAh 2S |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
3 x | Foam plastic plates (310x210x8 mm) |
2 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Cannon 12.7 cm (2 pcs) |
1 x | Stick coupler Ms 15 mm |
1 x | Ply-Span 450x600/13g Yellow |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
2 x | Motor 2212 (1000KV) Quadcopter F450 |
2 x | Smoke set "M" |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
2 x | 40 mm air cylinder |
2 x | TS832 to Gopro AV/Power Cable |
4 x | White spinner propeller pleg. 55 mm / 6 mm |
1 x | Battery LiPo TATTU 1550 mAh 3S 11,1V 75C |
1 x | DUPLEX R6G indoor receiver 2,4GHz |
3 x | Extinguisher CO2 - 2 Kg |
2 x | "Taxi Tank" Fuel Tank |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Wire easy tensioner (red) |
1 x | PowerPack 2.5X2 PRO |
2 x | Red smoke canister 140 g |
1 x | IKURA 4.0 m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Air Intake manifold 90° - Large |
1 x | Ply-Span 450x600/13g Black |
3 x | Spinner propeller pleg. 30 mm / 6,0 mm |
3 x | Long adjustable aluminium control horn 2,8x24 |
3 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
3 x | PVC grid straight 290x185x0.32 mm |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | ASPIRE Blue ARF 2.000 mm |
3 x | Motor DLE 200cc Std |
2 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | DJI Mavic Air Fly More Combo |
1 x | TX 250 mW especial GOPRO |
2 x | Savox Brushless Servo SB-2271SG |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
2 x | Raer wall |
2 x | Spare spinner 36 mm 3-Bl |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
5 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Oracover Azul Cielo 2 m |
1 x | 45 mm gas motor standoff |
1 x | ALU double servo arm 3 mm shaft |
1 x | Cyano INSTA - FLEX+™ (25g) |
5 x | LO 100 ARC 3.3m,cabina |
2 x | One touch canopy lock |
1 x | Furling sail Ms.10mm (5pcs) |
1 x | Carbon plate 350x150x1.5 mm |
1 x | 11 mm wing servo holder |
2 x | Servo SAVOX SV-1260 MG |
1 x | Landing gear frontal support 29x26x13,5 |
2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
2 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
2 x | Fuel Fittings-Gold |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
4 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Foam plastic plates (310x210x3 mm) |
1 x | Long extra-strong control horn with bearing 2,8x34 |
2 x | ABS 500 x 400 x 0,5 mm (white) |
4 x | Set Wingjoiner carbon ODYSSEY |
1 x | Cannon 53/6 mm |
2 x | Medium pin type hinge (12 uds) |
4 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
4 x | Profile ABS half cane 2.5x1000 mm |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
2 x | Chopped glass fibre strands 3 mm |
2 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | ODYSSEY Navy ARF 2190 mm |
2 x | ZERO Figther A6M52 93", Electric retract Landing gear |
2 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Extender tip (6 pcs) |
2 x | Ventral support for AX-18/AX-60 |
1 x | ExtraCA Top |
1 x | Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Oracover Yellow CADMIO 10 m |
3 x | Pipa BULL MØ1 2.600mm |
2 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Railing 5x100 mm |
1 x | Offshore-Schleppwinde Bs |
2 x | Central piece 47 mm 0º |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
3 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
3 x | Long pinned hinge (6 uds) |
1 x | CHALLENGER Indoor |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | 10 mm gas motor standoff |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
2 x | SPITFIRE Mk-IX 81", Electric retract Landing gear |
2 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Clamping slide 14mm (10 pcs) plastic |
3 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Battery LiPo TATTU 1300 mAh 4S 14,8V 75C |
3 x | DINO Glider ARC |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | FOXY G2 C3530-700 |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | DUPLEX R7 receiver nano 2,4 GHz |
1 x | LA500 housing-upper cyclic |
1 x | Allen wheel collar M3x5 |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Body for landing gear Ø 4 mm |
3 x | ABS 500 x 400 x 1 mm (white) |
1 x | Neck strap JETI DS |
1 x | Fiberglass motor-holder for electric motors |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Set Wingjoiner carbon ASPIRE |
1 x | TP/TopFuel - XH 2/3S Adapter |
2 x | Short adjustable control horn 3x24 |
2 x | Oracover Brown 2 m |
1 x | Dia. 25x5 mm tefon tube for escape |
3 x | 57 mm micro-mini servo cover |
2 x | Spinner propeller pleg. 40 mm / 3,17 mm |
1 x | Battery LiPo TATTU 1550 mAh 4S 14,8V 75C |
1 x | La Capitania di Venetia accesories |
1 x | Snap long M2 (10 uds) |
1 x | CESSNA 50E White/Blue |
2 x | DUPLEX R7 receiver 2,4GHz |
1 x | ORACOVER Ferrari red (2 m) |
4 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
3 x | L-Connector 1.5 mm x 1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | Coupling for 4 mm axis |
1 x | Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace) |
1 x | Ply-Span 450x600/13g White |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | TAKEO 3.6m electric |
2 x | EDGE 540-A 91" (2310 mm) |
2 x | DUPLEX RC Droid Box - DC/DS |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
3 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
2 x | Interruptor RX/Batterie |
2 x | 58 mm micro servo cover |
1 x | Bidule 55 V3 2460 mm |
2 x | EASYGLIDER 4 RR |
4 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
2 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | NF-3X-80 liner Kit |
1 x | 90x75 mm standart servo cover |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
4 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
2 x | Turnbuckle M2,5x27/43 (2pcs) |
2 x | T-Hose connector 4-4-4mm |
1 x | Extension 100 cm (Futaba) |
1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
1 x | L ELBOW DA-150 "normal" (2 pcs) |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Blade holder lower |
1 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
1 x | Fox 4000 mm with flaps (Airwold) |
4 x | Rubber profile 8-2 mm 2M |
2 x | 23x10 BIELA propeller |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Canadair CL-415 (aero-naut) |
2 x | 18 mm reinforced hinge |
1 x | LO 100 ARC 3.3m |
1 x | Ant. Cable R606/17/08/14FS L:1500mm |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Motor DA 150 |
2 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
1 x | Gobe R-26S (Airwold) |
2 x | ODYSSEY REd ARF 2190 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | SU 29S 140 carbon landing gear |
1 x | Servo TOPMODEL S7520 MG |
1 x | Pitts Mufflers EME 55/60 cc |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Wheel 18 mm |
1 x | NF-3m Heli Kit |
1 x | Metal ring front FEMA |
1 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Capstan of plastic 125x72x45 mm |
2 x | Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace) |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
2 x | Multi-adapter balancer JST - TP |
3 x | Green smoke canister 140 g |
2 x | GPS V2 Sensor for M-LINK receivers |
1 x | wire tensioner (blue) |
1 x | TopFuel LiPo 35C-X 5000mAh 6S |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace) |
1 x | Racor 3/3 mm |
2 x | Astra (Top Model) |
2 x | FESTO connector M5 Quick 6 mm |
1 x | Propeller RABOESCH.Ms 70L (5 Blades) (Left hydropropeller) |
2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
2 x | White smoke bombs AX-3 (10 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | 40x22D BIELA propeller |
1 x | Propeller RABOESCH M5 60 mm (4 Blades) (Left hydropropeller) |
2 x | Housing Ø 6 mm (20 pcs) |
2 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | ODYSSEY Blue ARF 2190 mm |
2 x | Initior Receiver FRX2 Wireless |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 5,0 mm |
1 x | 20 mm gas motor standoff |
1 x | Wheel keeper washer |
2 x | Spinner propeller pleg. 36 mm / 4,0 mm |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
2 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
2 x | Ball joint long |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | FESTO connector M7 Quick 4mm 90º |
2 x | Propeller AERO-NAUT M5 0 mm (4 Blades) (Left hydropropeller) |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
2 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | Motor DLE 20 RA cc |
2 x | COMFORT MOUNT ø 60mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | FX three-position switched channel, long |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Thread locker IC-Loc™ red "high" 10 ml |
3 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
4 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
3 x | 270 mm 3/3 mm shaft ship |
1 x | Pushrod octagone 4/3 |
1 x | KABRIOLIN 3D Electric 1.4m |
1 x | Propeller RABOESCH.Ms 35mm/M4r 5-BL (rigth hydropropeller) |
2 x | Spinner fold propeller 38 mm (white spare spinner) |
1 x | P-51D "Gunfighter" 89" (2260 mm) |
1 x | SPARK Switch 5.9v |
2 x | Electronic switch JETI SP6 0-15v/6A |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | Ventus 2cx 4.5 m |
1 x | TopFuel LiPo 25C-ECO-X 1800mAh 3S |
1 x | 40 mm white plastic spinner for folding propeller |
1 x | Radar 56 mm |
1 x | BIELA 25x10 WILGA Propellers |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | 102 mm aluminium spinner |
1 x | Gates hinge 30x16 mm (2 pcs) |
3 x | Silicone red 0,75 qmm wire ( 1 m) |
4 x | Hose clips 6 mm |
1 x | XPower XC4226/12 LS |
5 x | Silicone black 4,0 qmm wire (25 m) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Pendulun 27g to tank |
1 x | Spinner 3BL propeller pleg. 65 mm / 4,0 mm |
1 x | 42,0 mm propeller (left propeller) |
3 x | Rudder forward 90x28 "type Kato" |
2 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Fascination 3600 mm, Canopy (Top Model) |
2 x | Coupling for 2,3 mm axis |
1 x | Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace) |
1 x | Neoprene tube 7,5x3,5 mm (1 m) |
1 x | FunCup XL RR |
3 x | Bearing block for noseleg landing gear |
1 x | AXI Cooler 41xx |
3 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
4 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Central piece 3Bl 47 mm 0º |
1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
1 x | LA500 nose |
1 x | Spinner 55 mm White (Kavan) |
1 x | ODYSSEY Horns Set GFK |
1 x | L ELBOW 90º ø 25 mm |
1 x | 60 mm aluminium spinner (Kavan) |
1 x | ULTRA STICK 30 cc ARF |
1 x | Spinner 42 mm EXTRA 330SC |
3 x | ABS angle 6,0x6,0x1000 mm |
1 x | Deck Lamp with Reflector Ø 22 mm 3 V |
1 x | Glider PIROL |
1 x | Repair set for RAB0108-31 |
1 x | 24x12 BIELA 3Bl propeller (3-blades) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
2 x | Combo 4 pcs AXI 2204 Multicopter |
2 x | Parachutist |
2 x | 700 ml complete glow fuel tank |
1 x | KONDOR 15-92 |
2 x | Screw M3x16 |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Kerosene valve EVO Jet |
2 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
3 x | Aluminium sheet 500x250x0,5mm |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
2 x | Coupling for 5 mm axis |
1 x | NF-3 RC set |
1 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | Battery LiPo GENS 6000 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
2 x | Jet Afterburner Simulator NF-Jet2YY Set |
2 x | EVP Unit for AXI2208/xx and 2212/xx |
5 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Anchor 80 mm (2 uds) |
4 x | ESC ALPHA 60A HV |
1 x | Cierva C30 spanish decoration Stickers |
2 x | Profile ABS half cane 3x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
3 x | Silicone red 6,0 qmm wire ( 1 m) |
2 x | Sheet Depron Aero 1250x800x3 mm |
3 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | Red smoke canister 65 g |
1 x | Fishing boat Jule Fischkutter |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Prelude ARF 2500 mm, spare wing (TopModel) |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
1 x | 26x8 BIELA propeller |
1 x | Wheel collar 5 mm Ø (4 uds) |
3 x | Spinner propeller pleg. 45 mm / 4 mm |
2 x | COPILOT Multiplex |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
2 x | Extension 5 lipos JST/C - JST |
2 x | 45 mm flag mast |
1 x | Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
3 x | 550 cc gasoline fuel tank complet |
1 x | FesEx-Uni8 System |
3 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Motor Mega AC 16/25/01E 3.17mm |
1 x | TopFuel LiPo 25C-ECO-X 1300mAh 2S |
2 x | Propeller RABOESCH M4 70 mm (5 Blades) (Right hydropropeller) |
1 x | 42 mm central piece for 4 blades |
1 x | Servo Mount M (blue) |
2 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Compass Ø 15 mm (20 pcs) |
2 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
3 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
2 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
2 x | Set of buckles and strap, 1:4 scale. |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
2 x | BU 131 Jugmann Panel Instrum. frontal |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Small pinned hinge (6 uds) |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Battery LiPo TATTU R-Line 1550 mAh 4S 14,8V 95C |
2 x | Servo TOPMODEL STANDARD S3217 |
1 x | Yellow smoke canister 65 g |
1 x | Rivette Ø 4,0 mm (50 pcs) |
2 x | SIG Coverall 1.2x4.5 m |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
3 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
4 x | Silicone red 2,5 qmm wire ( 25 m) |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | KIRA 480-43 |
1 x | Propeller CFK 20x13 |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
2 x | CC 02 |
1 x | P-51D "Blondie" 89" (2260 mm) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
3 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Bronze bearings Ø 5 x Ø 8 x 8 mm |
2 x | Spare white 36-38 mm spinner |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Motor Mega AC 16/15/08 |
2 x | Propeller RABOESCH M5 100 mm (4 Blades) (Left hydropropeller) |
3 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Large flex hinge (12 uds) |
1 x | Superlight deluxe wheel 75 mm (2 pcs) |
2 x | White spinner propeller pleg. 55 mm / 5 mm |
1 x | 32x22D BIELA propeller |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Landing gear frontal support 25x32x16 |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | Battery bed V2_S (black) |
2 x | Spinner propeller pleg. 40 mm / 6 mm |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | 7 mm gas motor standoff |
1 x | NIEUPORT XXIV ARF 1780 mm |
2 x | Reflector 18 mm (2 pcs) |
1 x | Head spacer |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
3 x | Silent-blocks DLE 170M |
1 x | Dia. 20x10 mm teflon tube for escape |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
3 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | Nut M2 |
1 x | Cleat 15 mm (2 pcs) |
3 x | 500 ccm gasoline fuel tank |
1 x | VBar Control RX-Satellite |
1 x | 22x12D BIELA 3Bl propeller (3-blades) |
3 x | Air Trap Mounting - 175ml |
4 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Motor Mega AC 16/30/01 |
1 x | Propeller CFK 14x8 Slim |
1 x | Potenciometro micro |
1 x | ENIGMA ARF |
2 x | Prop Saver for AXI 22xx/xx |
1 x | Exhaust gasket Valach 85 |
1 x | Rangefinder 39x20 mm (2 pcs) |
1 x | Alu servo arm double RHINO |
1 x | Metal clevis M3 (10 uds) |
1 x | Rangefinder 20x49 mm (2 pcs) |
2 x | Green smoke canister 65 g |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Giant Scale Muffler D.A. 70 (2pcs) |
2 x | Styrene plate 320x120x0.5 mm |
4 x | Profile ABS half cane 8.0x1000 mm |
1 x | TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG |
1 x | 10 mm aluminium spinner (Kavan) |
2 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
2 x | White spinner propeller pleg. 42 mm / 6 mm |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
2 x | Superlight wheel 100 mm with valve (2 pcs) |
1 x | Yellow smoke canister 100 g |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Propeller CFK 15x15 |
1 x | KingTech T-Modul 5 in 1 Telemetry |
2 x | White spinner propeller pleg. 36 mm / 5 mm |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Intairco CMB Super Filter - 6mm Barb |
2 x | Propeller 3BL 50 mm M4 Plastic |
3 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Snap for floding prop for 2 mm axi |
2 x | Rubber profile 6-2 mm 2M |
1 x | Q-12 2000 mm Electric |
1 x | MAMBO 17 |
1 x | KWIKFILL FUELING VALVE GLOW |
2 x | Quick hose connector 3-3 mm |
3 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
2 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Motor Mega AC 16/07/03 |
1 x | Avanti S 1.8m Jet White/Blue + Landing gear |
1 x | Cierva C30 Elevator |
2 x | FUTABA F14 + R168DF + Servo S148 |
1 x | Oracover Yellow CADMIO 2 m |
1 x | 28x12 BIELA 3Bl Pusher propeller |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | T-Hose connector 3-3-3 mm |
1 x | Oracover CARBON Metalic 1 m |
1 x | Z-shaped servo mount |
1 x | Propeller RABOESCH.Ms 60R (5 Blades) (Right hydropropeller) |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | Propeller CFK 14.5x10 Slim |
2 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | LA500 Blades |
1 x | 3,9 mm ZG20-ZG38 servo arm |
2 x | T-Motor U7-V2.0 Kv420 |
2 x | Red spinner 45 mm |
2 x | 10 mm gas motor standoff |
1 x | Red position light 3V 7x2 mm (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
2 x | Coupling for 3,2 mm axis |
1 x | Transmitter SPEKTRUM DX-9 (Only TX) |
1 x | Remote electric ignition system |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Motor EME 60 cc |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Motor Johnson 650 with L base and reducer 1,94:1 |
1 x | White large kwik link (10 pcs) |
1 x | Body for landing gear Ø 3 mm |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Motor DLE 30 cc V2 |
4 x | Y-Hose connector 4-4-4mm |
1 x | Control for forward wheel (MINI) |
1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace) |
1 x | Central piece 42 mm + 5º |
1 x | 26x12D BIELA 3Bl propeller (3-blades) |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
1 x | Astra wing Joinner (Top Model) |
1 x | Propeller RABOESCH M5 90 mm (4 Blades) (Left hydropropeller) |
3 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
2 x | White smoke canister 65 g |
1 x | Arnes cruzado Confort de Luxe PROFI |
1 x | Propeller RABOESCH M5 0 mm (4 Blades) (Right hydropropeller) |
1 x | Glider STROLCH |
1 x | 32x18D BIELA propeller |
1 x | SIG Coverall 1.2x0.9 m |
1 x | 5 mm gas motor standoff |
1 x | Spinner propeller pleg. 38 mm / 5 mm |
1 x | LA-7 2134 mm(CY model) |
1 x | Silencer Ring 7-35 |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | Quick hose connector 3-3 mm |
4 x | 120x60 mm SLH KOVO wheel |
3 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | MIG 29 EDF |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Sheave Pl. 1R. 5 mm |
1 x | Gates hinge |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
4 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Spinner 60 mm GFK |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. trasero |
7 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
2 x | Hose clamps 0.16-0.20in, (4 pieces) |
1 x | Swift S1 De-luxe 3.730 mm |
1 x | Festo Adaptor Tygon Large/4mm |
4 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Pushrod octagone 3/2 |
1 x | Central piece 47 mm - 2,5º |
1 x | Radar 46 mm |
1 x | Propeller CFK 15x7 |
2 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Oracover Azul 2 m |
1 x | Battery LiPo TATTU 1800 mAh 4S 14.8V 75C |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Sheave Pl. 2R. 3 mm |
2 x | Strut Set SUPER GALEB G4 (without wheels) |
1 x | Pendulun "luxe" to tank |
1 x | Head core |
1 x | G-Ring Ø3mm Ø3xØ6x3 mm |
2 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Female connector for 16 pines AWG |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Propeller CFK 12.5x7 |
1 x | KIRA 600-24 6,7:1 |
2 x | Pulley brass 10/2 (2 pcs) |
2 x | Lipo GENS Soaring 3300 mAh 2s 7.4v 30C |
1 x | Pulley 19x22 mm |
1 x | Clamp K30 G3 |
1 x | Servo SAVOX SV-1273 TG |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Chigre de amarre Scale 1:32 |
1 x | Dia. 15x25 mm tefon tube for escape |
1 x | Kerostarter K30G |
1 x | Pitts Mufflers EME 35 cc |
2 x | Coupling bush 5 - 5 mm |
1 x | Motor OS FS 95 V 4T |
1 x | 27x10 prop Super Silence |
1 x | Ventus 2cx 4.5 m Winglets |
2 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Guide capes 25 mm (2 pcs) |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
2 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Canister combo DLE 120 cc |
1 x | BU 131 Jugmann ARC |
1 x | Boat 82 mm |
1 x | Cockpit plastic closing |
1 x | Blades 330mm |
1 x | SPARK Switch 12v |
1 x | Avia spare blue cockpit (Top Model) |
3 x | Profile ABS half cane 7.0x1000 mm |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Oracover White 10 m |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Superlight deluxe wheel 40 mm (2 pcs) |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Propeller RABOESCH M4 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | F-104 Starfighter USAF (SebArt) |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | Lipo KAVAN 3300 mAh 7.4v 40/80C |
1 x | FELIX JR Red/Yellow 1750 mm |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Spinner fold propeller 36 mm (white spare spinner) |
4 x | 30 mm Alu spinner 3 mm pleg. propeller |
3 x | PowerFuel RX V2 Fuel Pump |
1 x | Windsock Ozone L -1200 mm |
2 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | Parachute PV6 for F3J |
2 x | Ball Bearings for motor A60-V2 |
1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
2 x | Quick hose connector 4-3 mm |
1 x | Small flex hinge (12 uds) |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Long pinned hinge (12 uds) |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | White spinner propeller pleg. 42 mm / 5 mm |
1 x | Ferrita 27x14x7 mm |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Spare white 38-45 mm spinner |
1 x | Spring clamp for tube Ø50 mm |
1 x | Lense for Spotlights, 20mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | XPower H PROP HUB Ø5.0/20mm +2,5° |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | Central piece 52 mm 0º |
2 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | FESTO connector M7 Quick 6 mm |
2 x | Extractor piñones 2.3/3.2 mm |
1 x | Central piece 38 mm 0º |
1 x | 280 cc gasoline fuel tank complet |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Buy Perforated film 100 cm / 20 m |
2 x | Cap Hispano Aviación |
1 x | FESTO Filter 6 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
1 x | Central piece 52 mm - 5º |
2 x | 7.94 x 4.76 mm tygon tube 1 m |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | Pitts Muffler kit for CAP 21 |
1 x | FESTO connector M7 barb fitting 6mm |
3 x | Profile ABS half cane 6.0x1000 mm |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Transmitter JETI Duplex DS-12 EX Multimod YELLOW |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Central piece 52 mm - 2,5º |
1 x | Electric Fuel pump |
3 x | Flap hinge (6 pcs) |
2 x | Propadapter for motor A50 |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Central piece 72 mm 0º |
1 x | 50 mm white plastic spinner for folding propeller |
1 x | DLE 55 RA pipe plug |
2 x | Silicone black 0,75 qmm cable ( 1 m) |
2 x | Profile ABS half cane 5.0x1000 mm |
1 x | Spare spinner 65 mm 3-Bl |
1 x | Autogyro Cierva C30 Spain |
1 x | Extension Arm for Carburetor (red) |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
2 x | Rescue 1,8m2 / BackPack |
2 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Exhaust K45TP |
1 x | SUPER DIMONA TC-80 |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | 1000 ccm gasoline fuel tank |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Variable Flow Smoke Pump System |
1 x | Para-RC Mix |
1 x | DLE 55 carburetor |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | diameter silicone tube for glow |
1 x | Piston ring for DLE-20 |
2 x | Propeller diller for EME35 and DLE35 |
2 x | PowerBox Smokepump |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | Spring Clip Ø25 mm |
2 x | MAX pilot ARTF |
1 x | ABS angle 5,0x5,0x1000 mm |
3 x | Brass rod Ø 0.8 mm x 1000 mm |
46 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Pitts Mufflers EME 70 cc (2 pcs) |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Battery LiPo GENS 6500 mAh 3S 11,1V 60C (Gens Ace) |
1 x | FESTO Filter 4 mm |
1 x | Boat 43 mm (5 pcs) |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Central piece 52 mm + 5º |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | T- Fittings red color (2pcs) |
1 x | Motor DLE 170 M- Paramotors |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | EDGE 540-A 105" (2660 mm) |
3 x | Motor OS 3820-1200 electric |
1 x | Propeller diller for DLE111 and DA85-150 |
2 x | FESTO connector M5 Quick 4 mm |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Spinner 3BL propeller pleg. 36 mm / 6,0 mm |
2 x | Jeti Black cap |
2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | T-Connector 4.0 mm x 1000 mm |
2 x | Opale Rucksack |
2 x | double Fuel Dot V2 (silver) |
1 x | Para-RC Trike "RC-Bullix" |
2 x | Electron 22 mm Fitting barb |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
2 x | Quick hose connector 6-4 mm |
1 x | Central piece 42 mm + 2,5º |
1 x | Parachute P4 |
2 x | Ferrita 17x10x6.5 mm |
3 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
2 x | Filler Gauges |
1 x | Muffler DLE-120 Right |
3 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | T- Fittings blue color (2pcs) |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Blocking screws M6 gas engine |
1 x | Central piece 47 mm + 2,5º |
1 x | Ferrita con funda |
2 x | Softshell Hispano Aviación |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Spinner propeller pleg. 40 mm / 5 mm |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm |
1 x | JM electric Pump |
1 x | Muffler DLE-120 Left |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
3 x | Shirt Hispano Aviación |
1 x | SAITO FG-36 carburetor |
2 x | LUCAS pilot ARTF |
3 x | Vest clothes Hispano Aviación |
2 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Spinner propeller pleg. 45 mm / 6 mm |
1 x | 42 mm white plastic spinner for folding propeller |
3 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Buy Perforated film 100 cm / 50 m |
2 x | Sensor telemetry FUTABA SBS-01C |
1 x | DLE 111 pipe plug |
1 x | Spinner 3BL propeller pleg. 36 mm / 4,0 mm |
2 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | 20x15 Falcon electric V2 |
1 x | Parachute BACKUP X100 |
3 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Spinner propeller pleg. 38 mm / 4 mm |
2 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | CORTEX |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | EME 55 cc carburetor WALBRO |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Servo HITEC HS-53 |
3 x | Profile ABS half cane 2.0x1000 mm |
2 x | Distanzstück motor OS 120 AX |
3 x | Extra hard 750 ccm complete gasoline fuel tank |
3 x | Windsock Ozone L - 700 mm |
1 x | Spinner propeller pleg. 38 mm / 3,17 mm |
2 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Ball link M3 (6 uds) |
3 x | PVC 0,35 qmm servos wire Graupner (100 m) |
2 x | 100m servo "Premium" wire (white/red/blue) |
2 x | 200m servo "Premium" wire (white/red/blue) |
1 x | USBCOM 5i |
2 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Adapter lead MPX/EC3 |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | 10m servo "Premium" wire (white/red/blue) |
2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Ball link M3 (10 pcs) |
3 x | Receiver GRAUPNER GR-12 HoTT |
1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Ball link M2,5 (10 pcs) |
2 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
4 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Socket head ball link M3 (2 uds) |
1 x | M3 Maxi ball link (2 uds) |
2 x | Receptor GRAUPNER GR-24 HoTT |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
2 x | Ball link M2 (10 pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Receiver GRAUPNER GR-16 HoTT |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | 6 mm ball link M3 (10 pcs) |
2 x | Long ball link M3 (6 uds) |
3 x | PVC 0,25 qmm servos wire Graupner (5 m) |
3 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Joint with bearing M2 22x5,5 |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Short ball link M2 (6 uds) |
1 x | Ball link M3 RPA's-UAV's |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Joint with bearing M2,5 22x5,5 |
3 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Long ball link M2 (6 uds) |
3 x | Propeller G-Sonic 20x8 |
2 x | Extension MPX-MPX 20 cm |
3 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | Deposito DUBRO 360 ml - 12 oz |
2 x | Cable set Premium™ MAXI "one4two" |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Deposito DUBRO 1800cc-60oz |
3 x | 8 mm Adapter for AXI53xx |
2 x | MZ-10, 5 Channel HoTT |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | Deposito combustible tipo "turbina" 330 ml |
3 x | Spinner propeller pleg. 32 mm / 5,0 mm |
2 x | Spinner propeller pleg. 40 mm / 5,0 mm |
2 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | 22m Fitting barb |
1 x | Junta humo metalica G35 DLE35 |
1 x | Double side nipple |
1 x | Black "FUEL VENT" round aluminum overflow socket |
2 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
2 x | Spinner propeller pleg. 28 mm/5,0 mm |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
2 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | Deposito DUBRO 3000cc-100oz |
1 x | Propadapter for motor A60-V2 |
2 x | Canopy Latch |
2 x | Frontal Adapter for AXI53xx |
2 x | Bob airtrap set |
2 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
1 x | Tacometer mini ignition RCEXL |
1 x | Propeller hub spacer 8/5.5 |
3 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
1 x | O-ring Saito FG-73 5cyl |
1 x | Blue "FUEL VENT" round aluminum overflow socket |
2 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Deposito SECRAFT V2 1000 ml Gas |
2 x | 500 ccm complete gasoline fuel tank |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Hitec 46 mm servo arm with ball link |
1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
1 x | Hose stopper 4 mm |
1 x | Digital scale up to 40 kg |
1 x | Hopper 125 ml XICOY with support |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Hitec 52 mm servo arm |
1 x | Hitec 38 mm servo arm |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | HOPPER tank Digitech 100 ml |
2 x | Hardener Aero EPH 161 (500 g) |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
2 x | Crystal TX 35.180 Ch 78 |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | XTorque CFK Servohebel 38 |
1 x | Crystal TX 35.050 Ch 65 |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
2 x | Rubber profile 10-2 mm 2M |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Adapter rotula M3 |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Futaba 52 mm servo arm |
1 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 6mm CLASSIC PRO |
1 x | FuelTank Cap (blue) |
1 x | Crystal Universal RX 35.140 Ch 74 |
2 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Futaba 38 mm servo arm |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Hopper UAT Sebar 400 ml |
1 x | Profile ABS half cane 4x1000 mm |
2 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Turbina KINGTECH K320 G5 |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Vertical mounting servo holder |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Paramotor Trike XL |
1 x | External LED's (2 pcs) |
1 x | PowerBox iGyro 3xtra |
1 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | PowerBox MERCURY SR2 |
1 x | PowerBox ROYAL SRS |
1 x | PowerBox Competition SR2 |
1 x | Battlife Guard 2s |
1 x | MicroMatch PowerBox |
1 x | NF-2 RC set |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
2 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Logo 400 SE VBar |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | ZENOAH/ZG 20cc |
1 x | ZENOAH ZG26 SCM Marine Engine |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | ZENOAH G270RC |
1 x | ZG231cc SHL |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Reduction gear 2.8:1 for ZG 38 inline version |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | VBar Control Touch, midnight black |
1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
1 x | ZENOAH ZG 38 SC with Choke Carburettor |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | LOGO 600 SX (kit) |
1 x | PCI-HV ignition conversion set with Zenoah rubber plug cap for Z |
1 x | VTX 477 Carbon Rotorblade |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Secraft Fuel system v2, red color |
1 x | Propeller 8x4 Electric |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | Cooler motor type 300 |
1 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | 200 Newtons FEMA absorber |
1 x | 76 mm light wheels (2 pcs) |
1 x | Electric Fuel Pump 12v |
1 x | Propeller 3x3 |
1 x | 150 Newtons FEMA absorber |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Cooler motor type 150 |
3 x | Cooler motor type 400 |
2 x | Gasket electric Fuel Pump |
2 x | KAVAN Hand crank fuel pump |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Burner Plug K30/ K45 |
1 x | Spinner 82mm Black ventilado |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Prop Holder AXI 41xx V2 |
1 x | 4 blades set |
1 x | Motor Mega AC 16/25/04 COMBAT |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | Central piece 47 mm - 5º |
1 x | Motor Saito FG-90 R3, 90 cc |
1 x | Spinner propeller pleg. 38 mm / 4,0 mm |
2 x | Vacuum pump P1-N |
1 x | Z Bender - S Type Tool |
1 x | DLE Ignition 170M |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | 15x7 tree blades propeller LEFT |
1 x | 19x8 BIELA propeller |
1 x | Hovercraft sailcloth |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | Mobile Terminal |
1 x | Drilling-template set for Moki engines Moki S150, S180, S215, S2 |
1 x | AXI 2204 Multicopter |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Turbine HORNET 85 SE |
1 x | Colador RABBIT |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | 45 mm white plastic spinner for folding propeller |
1 x | Propeller diller for DLE170 |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
2 x | Actuator Electric 25 mm HIGH TORQUE |
2 x | Short ball link M1.6 (6 uds) |
2 x | JETI transmitter DC-14 II Green Multimode |
2 x | JETI transmitter DC-14 II Blue Multimode |
1 x | Emisora JETI Duplex DS-16 II BLACK Multimode |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado |
2 x | M2 5Diam black ball link V2 (2 pcs) |
2 x | JETI handheld transmitter DS-14 II Blue Multimode |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
2 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
1 x | Soporte servo KST X08/H and Plus |
1 x | Ball link M1.6 (6 uds) |
1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
1 x | Air pressure gauge |
1 x | Servo SAVOX SV-1261 MG |
1 x | Slider Extenion for CORE |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Servo SAVOX SA-128S SG |
3 x | Silicone red 1,5 qmm wire ( 1 m) |
1 x | Axle for AXI 4130 V2 motors |
1 x | Axle for AXI 2212/xx motors |
1 x | Spare spinner 40/42 mm 3-Bl |
1 x | POLARON EX 800w charger |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Ignition RM-25V |
1 x | Motor ROTO-35 FS BM 4T |
2 x | Conector JAPAN G2 Set 5 pares |
2 x | 28 mm tailwheel unit |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
3 x | Foam plastic plates (310x210x2 mm) |
1 x | Manometer 4 mm |
2 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | Debonder UN - CURE™ (30g) |
1 x | Charger LiPo Charger4 |
3 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
1 x | MZ-18, 9 Channel HoTT |
1 x | Decorative caps, multicoloured |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Cyano INSTA - CURE™ (56g) |
1 x | Servo BMS-4112 |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Foreman, scale 1:32 |
2 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Fuel Dot (RED) |
1 x | Motor NGH GF30 |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | DPSI RV Mini 6 (2008) |
1 x | Flex-headers for Valach VM 85B2-FS |
2 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Servo MKS HBL599 SL |
2 x | Silicone black 1,5 qmm wire ( 1 m) |
2 x | Propeller KAVAN 32x12 2-Bl |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | DPSI Micro - RCS |
1 x | Crystal Universal RX 35.050 Ch 65 |
2 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
2 x | Conector MR-60 (pareja) |
1 x | Crystal TX 35.150 Ch 75 |
1 x | GameCommander USB Universal |
3 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | VARIO module Hott |
3 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | NoNa BB wheel Ø150x45mm in pair |
1 x | Superlight deluxe wheel 50 mm (2 pcs) |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | Mini wheels (3 pcs) |
2 x | 90x45 mm hard foam KOVO wheel |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | wire tensioner (silver) |
1 x | Micro control horn T2 Ø 1 |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Futaba Multi-Switch-Prop 12+2 MODUL |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Conector JR Servo female (50 pcs) |
2 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Axle wheel with accesories |
1 x | Picas 12 mm (20 pcs) |
1 x | Koffeenagel Holz hell 8 mm (20 pcs) |
1 x | Oils Pumps Empty (1 liter) |
1 x | Mounting single stop Ms 10 mm |
2 x | Silicone red 0,5 qmm wire ( 25 m) |
1 x | Aceite AEROSHELL 500 SE Turbina 0,9 kg |
1 x | Sheave Pl. 1R. 3 mm |
1 x | Propeller 3x2 |
1 x | SERVO HOLDER |
1 x | Rocket D3-P |
1 x | HV6150 Digital Servo |
1 x | 400 Newtons FEMA absorber |
1 x | DPSI magnetic switch actuator (PCB) |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Servo Metal Horn 15.5 mm MKS |
2 x | Lightweight aircraft wheel, 50x18.5x3 |
1 x | Plastic wheels 28 mm (2 pcs) |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | Jeemo Dolly |
1 x | Servo Robbe FS 525 BB MG HV |
2 x | 2,0x50 mm allen screwdriver |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | 3,0x60 mm allen screwdriver |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Cut tube |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Starter EM Gear Power 250 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
2 x | 1,5x50 mm allen screwdriver |
1 x | Hot Glue Stick GREEN |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode |
1 x | Emisora JETI Duplex DS-16 II Carbon Line RED |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode |
1 x | Tx JETI Duplex DC-24 II Carbon Line Ruby |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Multimode |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark ORANGE Multimo |
1 x | Tx JETI Duplex DC-24 II Carbon Line Gray |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark GREEN Multimod |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Multimode |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo |
1 x | JETI handheld transmitter DS-14 II Green Multimode |
1 x | Transmitter JETI Duplex DS-12 SE Carbon RED |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
1 x | JETI handheld transmitter DS-14 II Red Multimode |
1 x | JETI transmitter DC-14 II Red Multimode |
1 x | Transmitter JETI Duplex DS-12 EX Multimod BLACK |
1 x | Transmitter JETI Duplex DS-12 EX Multimod RED |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Orange Multimo |
1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
1 x | Transmitter JETI Duplex DS-12 EX Special Edition |
1 x | Emisora JETI Duplex DS-16 II Carbon Line YELLOW |
1 x | DUPLEX 2.4EX Central Box 320 |
2 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | Wings Bags JEEMO |
1 x | 20-25mm Servo Arm |
1 x | Fuselage Bags JEEMO |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | 10-15mm Servo Arm HITEC |
1 x | Small kwik link (10 pcs) |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Crimping tool |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | 100 mm rods set for direction control |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Digital precision scale up to 2000 g |
1 x | Screwdriver for Torx® TX8 |
1 x | Universal Filter |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Jeti Advance Pro Program Card |
2 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | FELIX SportJet Blue 2200 mm |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
2 x | Helice FOXY 22x10 2-Bl |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Propeller FOXY 34x12 2-Bl |
1 x | Chopped glass fibre strands 3 mm |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Resistor 3W 5% 2R2 |
1 x | SPS 70V 100/200 A |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | SPS Remote switch actuator |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Motor NGH GF 150 R5 |
1 x | Crystal TX 35.100 Ch 70 |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Crystal RX 35.120 Ch 72 |
1 x | Propeller Pleg CAM Carbon 17x9 |
1 x | Silicone black 1,0 qmm wire ( 25 m) |
1 x | Receiver replacement antenna, approx. 15 |
1 x | PowerBox DigiSwitch V2 MPX/JR |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Cyano INSTA - CURE™ (225g) |
1 x | UHU hart 35 g |
1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
1 x | Tyres 70 mm Xclaibur (2 pcs) |
1 x | ALPHA 1000mm BL ARTR |
1 x | JSM U/C Leg Springs for XCALIBUR (Pr) (6-12Kg) |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal |
2 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Wood anchor 30 mm (2 uds) |
1 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | NoNa BB wheel Ø200x60mm in pair |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
3 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | NoNa BB wheel Ø105x35mm in pair |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Micro clevis (10 uds) |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Futaba 3010 - Gear Set |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Film release agent PVA 25 ml |
1 x | Resistor 3W 5% OR82 |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Landing lights 18 mm (0.71in) |
1 x | MEKP Harderner 100 g |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Ancla 16 mm (2 pcs) |
|
404,225.51EUR |