208.99EUR

Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
[FUTR7114SB]


Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver

With the Futaba R7114SB, Futaba offers a compact receiver with telemetry and 14 ports, equipped with 2 dipole antennas for difficult reception conditions. This makes the receiver ideal for larger models in which many servos need to be connected. In addition, the R7114SB has the FASST transmission protocol built in as an option and can be conveniently switched at the receiver!
Analogue or digital servos can be connected to ports 1 to 14. To enable shorter response times, the servo output signal for digital servos can be changed to 6.3 ms (instead of 16 ms for analogue servos).
Up to 18 programmable S.BUS servos or other S.BUS components such as gyros, flybarless systems or governors can be connected to the S.BUS port. All S.BUS servos are digitally addressed and can be connected with a single servo cable (3 wires). Although 4 servos are installed in a wing, only one servo cable goes into the wing. This keeps the complete wiring very simple and clear. If analogue servos are to be used on the S.BUS, they must be connected using a PWM adapter.
The R7114SB has antenna diversity with two dipole antennas. The receiver constantly compares which antenna has the better signal and switches to it in a flash.
S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter (FASSTest only). In this way, the measured values can be displayed on the transmitter or output acoustically. In addition, the receiver always automatically transmits the voltage of the receiver power supply (voltage sensor is integrated) and the signal strength.
ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV!

FEATURES
14/18-channel FASST / FASSTest receiver
Telemetry with S.BUS2
Telemetry with 32 channels
S.BUS / S.BUS2 port
Hi-Voltage (HV)
FASST Multi Normal / High Speed Mode
Dipole antenna diversity
Pulse switching Digital servos
Transmission type: FASSTest / FASST
Frequency range: 2.4 GHz
Channels: 14 PWM / 18 S.BUS
Transmitting power: 100 mW EIRP
S.BUS port: S.BUS / S.BUS2
Voltage range: 3.7 - 8.4 V
Weight: 21.0 g
Dimensions: 50 x 37 x 15 mm


Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
    Receivers->
      Acc/ Telemetria Jeti
      Compatible
      FUTABA
      Graupner
      Hacker
      Hitec
      Jeti
      Mikado
      Multiplex
      PowerBox CORE
      RadioLink
      RCM Pelikan
      Schulze->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Glases Innovation Plus
2 x Glases Stratus
2 x Glases Ace
4 x Glases Flitemaster
1 x Glases Nimbus "Black"
1 x Glases Nimbus
1 x Brass control horn M2 short for wire (2 pcs)
1 x Horn 6/35 with M3 Bearing
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x 20 mm carbon horn
1 x Horn 20x28,5 mm (2 pcs)
1 x Horn 16,5x20 mm (2 pcs)
1 x Horn 13,5x16 mm (2 pcs)
2 x LH long aluminium horn L31xH30 (2pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Small aluminium horn red (2pcs)
1 x 6 mm red aluminium threaded horn with patella
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x 6 mm blue aluminium threaded horn with patella
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Horn with ball 40x30
1 x Green silicone 0,25 qmm wire (50 m)
1 x Painting GHT Lexan Black 150 ml
1 x Extension 30 cm (Futaba)
1 x Futaba Female 40 cm extension
1 x 200 mm extensión servo HITEC/JR
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension silicon 100 cm (Futaba)
1 x Spray Graphit 33
1 x Cabel "Y" 30 cm (graupner)
1 x Premium servo extension 75cm
1 x Premium servo extension 25cm
1 x ABS tube 8.0x6.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
2 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x ABS tube 12.0x10.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
2 x Xplorer4 anemometro
1 x Ball Link Plier
2 x Ball link Aluminio M3 (2 pcs)
1 x Squared carbon wing joinner 5x5x220 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Hot Glue Stick GREEN
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x Xplorer1 anemometro
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Starter 12v (Max 180 and 30ccm)
1 x ABS tube 20.0x18.0x1000 mm
1 x Baseplate servo
1 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 4.0x3.0x1000 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x ABS tube 6.0x5.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
4 x Aro pasacable Ø25 mm (4 pcs)
1 x Xplorer3 anemometro
1 x ABS tube 5.0x3.0x1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Oracover Black 2 m
1 x Carbon fiber rod 2.0 mmx1000 mm
2 x Aro pasacable Ø20 mm (4 pcs)
2 x Support FUEL DOT V3
1 x Medium extra-strong control horn with bearing 2,8x24
2 x Micro control horn (2 pcs)
1 x Small aluminium horn gold (2pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
2 x Long extra-strong control horn with bearing 2,8x34
1 x Rudder forward 70x28 "type Kato"
1 x SlowFlyer control horn (3 pcs)
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x 1/6 Pilot "Tony"
1 x 127x43 Ø6.0 mm aluminium core wheel
2 x Horns indoor
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
2 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
2 x 3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Glases Moritz
1 x Protective Cover for wires Ø 6 mm 1000 mm
2 x 8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Brass control horn M4 short for wire (10pcs)
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Solarfilm Lite blue transp. 5m
1 x Propeller POWER-PROP 7x7
1 x Double conector with JR adapter and 200 mm extension
1 x Connector Sub-D 2+5 Male
1 x Dean "T" - Futaba Adapter
1 x BEC 3A FOXY
1 x 120x60 mm C SLH KOVO wheel
1 x 160 mm carbon undercarriage (2pcs)
1 x LiPo Storage Box Type "P"
1 x 82 mm aluminium spinner.
1 x 10 mm gas motor standoff
1 x Extension Arm for Carburetor (red)
1 x 1/7 Pilot "Japanese"
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x 20x200 mm battery rings
1 x "Taxi Tank" Fuel Tank
1 x 22m Fitting barb
1 x Spinner 80 mm GFK
1 x Carburator Moki S250
1 x 1/6 Pilot "Cindy"
1 x Xplorer2 anemometro
1 x Propeller APC 10x4.7 SF Pusher
1 x Soporte grifo FESTO (2 pcs)
1 x Support Pitot JETI
1 x Support pump Xicoy X45
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Propeller APC 11x7 Electric
1 x Propeller APC 10x6 Electric
1 x Propeller 8x4 Electric
1 x Propeller 3x2
1 x Cooler motor type 300
1 x Propeller APC 10x6 Electric Pusher
1 x Propeller APC 13x4 Electric
1 x FIALA Propeller 19x12 Electric
1 x Propeller APC 11x8.5 Electric
1 x Propeller APC 11x7 SF
1 x Propeller APC 11x8 Electric
1 x Support conector MPX (6 pcs)
1 x Propeller APC 10x7 SF
1 x Propeller APC 10x7 Electric
1 x Propeller APC 13x10 Electric
1 x Propeller APC 10x5 Electric Pusher
1 x Support ECU Xicoy X-45
1 x Propeller APC 13x6.5 Electric Pusher
1 x Support Filtro FESTO
1 x Propeller APC 10x4.7
1 x Propeller FIALA 15x8 3-Blade
1 x Propeller APC 12x8 SF
1 x Propeller APC 10x10 Electric
1 x Propeller APC 12x8 Electric
1 x Propeller APC 13x4 Electric Pusher
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x Propeller APC 11x4.7 SF Pusher
1 x Propeller APC 13x6.5 Electric
1 x Angle support XT60 conector
1 x Propeller APC 12x3.8 SF
1 x Propeller APC 13x8 Electric
1 x Propeller APC 10x5.5 MR Electric multirrotor
1 x Propeller APC 10x4.7 SF
1 x Propeller APC 14x10 Electric
1 x Propeller APC 11x10 Electric
1 x Support Flush MPX Conector (6 pcs)
1 x Propeller APC 14x12 Electric
1 x Propeller APC 11x4.5 Electric Pusher
1 x Soporte filtro FESTO (4 pcs)
1 x Support pumb/filter Xicoy X45
1 x Glases Aspen
1 x Cooler motor type 400
1 x Cooler motor type 280
1 x Reductora IPS 150 DX2BB-BXCS 7:1
1 x Reductora IPS dual-motor 10,7:1 with spinner
1 x Cooler motor type 150
1 x Foam wheel Ø 351 mm (2 pcs)
1 x Propeller 9x7 SlowFlyer
1 x Propeller 3x3
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x Foam wheel Ø 38 mm (2 pcs)
1 x Propeller 8x4,3 SlowFlyer
1 x Propeller 10x4,7 SlowFlyer
1 x Retract undercarriage
1 x Horn F3A de Titanium 16 mm (2 units)
1 x 36 mm red plastic spinner for fixed propeller
1 x Control horn long w/ball
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Brass control horn M2 long for wire (10pcs)
1 x Brass control horn M4 long for wire (4 pcs)
1 x Adjustable brass horn threaded M3
1 x Small control horn with bearing (2 pcs)
1 x Spinner plastic white fixed propeller 42 mm
1 x Spinner plastic red fixed propeller 30 mm
1 x Suncover 100cc Red
1 x AXI 2808/16 V2
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x COPILOT Multiplex
1 x Futaba Aero Large Case - Internal Foam
1 x USB Interface Adapter
1 x Futaba BLS152 - Upper Case
1 x Futaba 3010 - Gear Set
1 x Interruptor On/Off Corto micro
1 x Futaba S-Bus Rx/Gyro Link Lead
1 x Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
1 x Extension MPX-MPX 20 cm
1 x Silicone red 2,5 qmm wire ( 1 m)
1 x AXI 2814/16 V2 Long
1 x AXI 2820/10 V2 Long
1 x AXI 2814/12 V2 Long
1 x AXI 2814/12 V2
1 x AXI 2217/12 V2
1 x AXI 2808/16 V2 Long
4,375.99EUR
Manufacturers
Manufacturer Info
FUTABA
FUTABA Homepage
Other products
Languages
Español English
Currencies