Top » Catalog » Hardware » Batteries » LiPo Batteries » TopFuel » HK95000261

61.90EUR

LiPo TopFuel ECO-X 5000 mAh 2s 35C MTAG
[HK95000261]

LiPo TopFuel ECO-X 5000 mAh 2s 20C MTAG

Product description and features
In the meantime proven a thousand times the ECO-X cells are perfectly balanced between ampacity, weight and durability.
The battery is readymade soldered with the XT90-S connector system with anti-spark function and is perfectly suitable for the rough everyday use.
It can be used in all aircraft or ship models as well as in the R/C car scene.
Connections
XT90-S connector with gold contacts anti-spark function, suitable up to 90 amps permanent current
XH balancer connector
Safety when connecting
XT90-S connector with integrated anti-spark function which prevents the spark when connecting the controller.

Internal chip for battery telemetry
Battery data such as type, number of cells, capacity, C-rate or battery ID are stored on the passive MTAG chip. If desired* these values can be read out with an external NFC sensor such as the HACKER or JETI MTAG and be transferred to the transmitter telemetry system.
The built-in MTAG chip also offers the possibility of manually or automatically counting and storing the charging cycles. By using several identical batteries in serial or parallel operation, so more effective active battery management is possible.
*Note: It is up to the user if he wants to use the MTAG function or not. The TopFuel battery can be used without MTAG function like any ordinary battery.
Voltage Indicator technology
The TopFuel battery is delivered with the proven Voltage Indicator technology. At the press of a button, the battery charge status is displayed via four differently colored LEDs. The Voltage Indicator helps you to assess the condition of your battery at any time.
Optimized ex works
The special manufacturing process, where the batteries are pressed during filling, makes these cells up to 10 percent thinner and more robust than comparable cells with the same capacity and ampacity.
Specifications
Battery type LiPo
Cells 2S
Nominal voltage [V] 7,4
Capacity [mAh] 5000
C rate 35C
Dimensions and Weight
Length [mm] 140
Width [mm] 43
Height [mm] 22
Weight [g] 296

temporarily out of stock

Reviews

Customers who bought this product also purchased

Servo HITEC HS-82 MG temporarily out of stock	XT-90 connector (pair) temporarily out of stock	SE Ring 480 mm (2 pcs) temporarily out of stock
Sealing Iron Sleeve STD temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
    A123 LiFe Batteries
    Accesories
    AIRSOFT Battery
    Lead batteries
    LiIo Batteries
    LiPo Batteries->
      E-Flite
      Gens Ace
      KAVAN
      RAY/FOXY
      ROBBE
      ROI IMPORT
      SPEKTRUM
      TopFuel
    NiMH/NiCd Batteries
    Battery Testers
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ProgBox PRO LCD Hobbywing
44.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Dremel 3000 130W
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Digital precision scale up to 2000 g
1 x	3,0x60 mm allen screwdriver
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Ball Link Plier
1 x	Cut tube
1 x	Digital scale up to 40 kg
1 x	25 mm Sandpaper file
1 x	2,0x50 mm allen screwdriver
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Crimping tool
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	55% silver electrodes (2 pcs)
1 x
1 x
1 x	1,5x50 mm allen screwdriver
1 x	Copier 2x20 cm pcs
1 x	Dremel PERMAGRIT thin lime
1 x	Dust collector for mould cleaning
1 x	Concave-Convex sandpaper file 13 mm
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	2,5x60 mm allen screwdriver
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Steering arm 16 mm Ø 4 mm
1 x	Covered closure or fairings
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	One touch canopy lock
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Steering arm 16 mm Ø 3 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
2 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Straightened threaded rod M2-1m
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Cockpit plastic closing
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Screw-lock connector M2 (2 uds)
2 x	Marker ties (20 pcs)
1 x	SE Ring 360 mm (2 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	SE Ring 300 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 200 mm (2 pcs)
3 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
2 x	SE Ring 250 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x1000 mm Ring Strap Back To Back
3 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 330 mm (4 pcs)
2 x	20x200 mm battery rings
1 x	BALSA trip 2.0x10.0x1000 mm
2 x	BALSA triangular 6x6x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Conector Servo female 4 pines
1 x	Socket head long ball link M3 (2 uds)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Motor DLE 430 cc - Paramotors
1 x	Glases Ace
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Canopy Latch
2 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Tube support Ø 6mm (10 pcs)
2 x	Fuselage Autogyro RAINBOW
2 x	Tail tube RAINBOW
1 x	IKARUS plane
1 x	Blade holder center
1 x	Rudder
2 x	Head lower part
1 x	Servo Fork
1 x	Blade holder upper
1 x	Screw M3x16
1 x	Wheel keeper washer
2 x	Raer wall
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	SE Ring 400 mm (2 pcs)
2 x	120x60 mm SLH KOVO wheel
1 x	Tape GFK 25 mm
1 x	Tape GFK 50 mm
1 x	PPM Encoder Module
1 x	SE Ring 240 mm (2 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Blade holder metal LAMA
1 x	"S" set for planes
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Motor Mega AC 16/07/12
1 x	Motor Mega AC 16/25/04 COMBAT
1 x	MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x	Motor Mega AC 16/25/02
1 x	Blade Holder (3 blades)
1 x	Dean-T Plug Mold
1 x	Beech dowels 3.0 x 1000 mm
1 x	Red 3m5 mm connector holder
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	MPX PCB "6 Pins", 5 pieces
1 x	BALSA triangular 15x15x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	XT-60 connector (male)
1 x	MPX Support
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	MPX PCB "4 Pins", 5 pieces
1 x	Rotorshape Autogyro
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support pump Xicoy X45
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Battery charging cable XT60
1 x	JETImodel Addcap 1640
1 x	Axle for motor A50-L
1 x	Support XT60 conector (2 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support Filtro FESTO
1 x	Support ECU Xicoy X-45
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Blade Holder Full (3 blades)
1 x	Piñon motor rotor LA-500
1 x	Cable adapter iCharger
1 x	Propadapter for motor A60-V2
1 x	Backmountset complete A40
1 x	Shaft for A60-L V4
1 x	Shaft for A60-L (140mm)
1 x	Spikes Band (5 m)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm

7,601.40EUR