2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | 140 mm rods + T patellas set for direction control |
2 x | 100 mm rods + T patellas set for direction control |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | Canopy Latch |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | 140 mm rods set for direction control |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 45 mm rods set for direction control |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 45 mm rods + T patellas set for direction control |
2 x | 100 mm rods set for direction control |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | 90 mm rods + T patellas set for direction control |
1 x | Allen wheel collar M4x4 |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Allen wheel collar M3x5 |
2 x | Cockpit aluminium closing |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Clip fixing for wing (2 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 80 mm rods set for direction control |
2 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | ABS Strip 1.5x3.0x1000 mm |
2 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
2 x | Round Rod 4,0x1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
3 x | ABS Strip 1.0x5.0x1000 mm |
2 x | Strip 1,5x1,5x330 mm |
2 x | Round Rod 2,5x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
3 x | Strip ABS 2.0x10.0x1000 mm |
3 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
3 x | ABS I Strip 20x10x1000 mm |
1 x | Round Rod 1,0x1000 mm |
2 x | Strip ABS 2.0x3.0x1000 mm |
2 x | Strip 2,0x2,0x330 mm |
2 x | Round Rod 5,0x1000 mm |
2 x | Round Rod 1,25x1000 mm |
2 x | Round Rod 3,0x1000 mm |
2 x | ABS Strip 1.5x4.0x1000 mm |
2 x | Strip ABS 2.0x5.0x1000 mm |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | 6 mm aluminium horn with patella |
1 x | Small aluminium horn red (2pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Horn for flap control (1 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Horn with ball 55x40 |
2 x | Horn 5/10 with M2 Bearing |
2 x | Horn 13,5x16 mm (2 pcs) |
4 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
3 x | 6 mm blue aluminium threaded horn with patella |
1 x | RH long aluminium horn (2pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | Horn 6/27 with M3 Bearing |
2 x | Small aluminium horn gold (2pcs) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | SlowFlyer control horn (3 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Extinguisher CO2 - 2 Kg |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Lead with adhesive (2 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Snap short M2 (10 uds) |
1 x | Xplorer3 anemometro |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cockpit plastic closing |
2 x | Set cintas unión paracaídas 145 cm |
1 x | Windsock Ozone L - 700 mm |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | Profile ABS Square 2 x 1000 mm |
2 x | Profile ABS Square 1 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Wing OXY 5,0 m2 |
2 x | Paramotor BackPack XXS (without accessories) |
2 x | MAX pilot ARTF |
1 x | Opale Rucksack |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | Aramid 50 daN 50 m |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Parachute BACKUP X100 |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | XH male balance (3S) connector (2 pcs) |
2 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Connectors banna gold 5,5 mm (M/F) |
5 x | Connector CAN 15 |
1 x | Conector BEC female (10 pcs) |
4 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | XH male balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
3 x | XH male balance (2S) connector (2 pcs) |
2 x | Connectors banna oro 2 mm (M/F) |
2 x | Connectors banna oro 3,5 mm (M/F) |
1 x | 30 cm DEANS female connector |
2 x | Optotronix Aurora Plug |
2 x | XH female balance (3S) connector (2 pcs) |
2 x | Conector Servo female 4 pines |
2 x | XH female balance (4S) connector (2 pcs) |
2 x | XH female balance (5S) connector (2 pcs) |
2 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Banna gold connector 2,5 mm (M/F) |
4 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | ORACOVER Fluor red (2 m) |
2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Smoke set "M" |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Vest clothes Hispano Aviación |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
2 x | Round Rod 6,0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
2 x | Horn with ball 40x30 |
2 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Long adjustable control horn 3x34 |
1 x | Horn mando long (2 pcs) |
1 x | Extra long horn 60x30 |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Cable with accesories |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
3 x | Hovercraft sailcloth |
1 x | Horn 6/20 with M3 Bearing |
1 x | Pushrod octagone 4/3 |
4 x | Cockpit aluminium closing 4.7g |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
2 x | Round Rod 1,5x1000 mm |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
2 x | Wing bolts M3 Steel screw Red (2 pcs) |
2 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
2 x | Screw-lock connector M2 (2 uds) |
2 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | 2 mm male connector (2 pcs) with safety connector |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | XT-60 connector (male) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Parachute PV6 for F3J |
1 x | Red 3m5 mm connector holder |
3 x | Conector XT-30 (macho) |
2 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
3 x | Conector BEC male (10 pcs) |
1 x | MPX Support |
1 x | Connectors MPX male (PIN double) |
1 x | XT-30 connector (pair) |
2 x | XT-60 connector (female) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Bag connector 2 mm |
1 x | Conector JR Servo male (50 pcs) |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Conector MR-60 (pareja) |
2 x | Red 4 mm connector holder |
1 x | Connectors MPX black male |
1 x | Connectors MPX black female |
2 x | MPX PCB "6 Pins", 5 pieces |
1 x | Round flex hinge (12 uds) |
1 x | SSPS105 Super Hi-Power servo |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | MR30 connector female |
1 x | Conector JR Servo female (10 pcs) |
1 x | Conector JR Servo male (10 pcs) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | Windsock Ozone L -1200 mm |
1 x | MPX screwable clips (4 pcs) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | XH LiPo extension lead |
3 x | XH female balance (7S) connector (2 pcs) |
1 x | Servo Connector Brackets (10 pcs) |
2 x | Connectors DEANS (T) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Conector XT-30 (hembra) |
2 x | Connectors DEANS (T) micro |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
2 x | Bungee HLG Premium |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Horn mando small (2 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Control horn long w/ball |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | 5 mm M2 variable horn |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Micro control horn (2 pcs) |
2 x | Small aluminium horn blue (2pcs) |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | 6 mm M3 variable horn |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Adjustable brass horn threaded M3 |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | 5 mm M2 variable inclined horn |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Slave-cable USB Easy Sim |
1 x | Cockpit metalic closing |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Window mounting channel 5m |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Servo NARO Max Std |
1 x | 400 Newtons FEMA absorber |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | Micro Crystal RX 35.120 Ch 72 |
1 x | Propeller APC 13x8 Electric |
1 x | Propeller APC 10x10 Electric |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Propeller APC 13x4 Electric Pusher |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 11x8 Electric |
1 x | Propeller APC 10x7 SF |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | L-39 Albatros 1:4.75, Electric retract landing gear |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | Brushless ESC 30A F-450 |
1 x | Blades 330mm |
1 x | Connectors MPX female (PIN double) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | Turbo light spinner cap white 32mm |
1 x | Cierva C30 simulated motor |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | LA500 rotor head core |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Indoor hinge with servo arm integraded |
1 x | Long adjustable control horn with bearing |
1 x | ASPIRE Red ARF 2.000 mm, Canopy |
1 x | F9F COUGAR Red ARF 1.562 mm |
1 x | L-39 Albatros Scale 1:4.75 1991 mm |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | Esc KOSMIK 200+ HV |
2 x | Mounting frame MPX male connector |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | MPX Sub-D Adaptor |
1 x | Snap long M2 (10 uds) |
1 x | Strip 2,5x1,25x330 mm |
1 x | Horns indoor |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Electric Landing Gear Trainer Jet Intro |
1 x | Fan for A60 |
1 x | Rotorhead pushrod |
1 x | Blade holder upper |
1 x | JETImodel Addcap 820 |
1 x | Head runner |
1 x | LA500 Autogyro |
1 x | Ball joint long |
1 x | Side rudder |
1 x | 30 cm BEC cable (female) |
2 x | DUPLEX 2.4EX RC Switch |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | LA500 rotor head shaft |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Washer 2.2×4 |
1 x | LA500 cyclic central part |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | MT 125 temperature sensor |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | DUPLEX MUI 30 Sensor |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Carbon plate 350x150x0.5 mm |
1 x | 20 mm carbon horn |
1 x | Carbon plate 350x150x1.0 mm |
|
18,960.39EUR |