Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
With the Futaba R7114SB, Futaba offers a compact receiver with telemetry and 14 ports, equipped with 2 dipole antennas for difficult reception conditions. This makes the receiver ideal for larger models in which many servos need to be connected. In addition, the R7114SB has the FASST transmission protocol built in as an option and can be conveniently switched at the receiver!
Analogue or digital servos can be connected to ports 1 to 14. To enable shorter response times, the servo output signal for digital servos can be changed to 6.3 ms (instead of 16 ms for analogue servos).
Up to 18 programmable S.BUS servos or other S.BUS components such as gyros, flybarless systems or governors can be connected to the S.BUS port. All S.BUS servos are digitally addressed and can be connected with a single servo cable (3 wires). Although 4 servos are installed in a wing, only one servo cable goes into the wing. This keeps the complete wiring very simple and clear. If analogue servos are to be used on the S.BUS, they must be connected using a PWM adapter.
The R7114SB has antenna diversity with two dipole antennas. The receiver constantly compares which antenna has the better signal and switches to it in a flash.
S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter (FASSTest only). In this way, the measured values can be displayed on the transmitter or output acoustically. In addition, the receiver always automatically transmits the voltage of the receiver power supply (voltage sensor is integrated) and the signal strength.
ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV!
FEATURES
14/18-channel FASST / FASSTest receiver
Telemetry with S.BUS2
Telemetry with 32 channels
S.BUS / S.BUS2 port
Hi-Voltage (HV)
FASST Multi Normal / High Speed Mode
Dipole antenna diversity
Pulse switching Digital servos
Transmission type: FASSTest / FASST
Frequency range: 2.4 GHz
Channels: 14 PWM / 18 S.BUS
Transmitting power: 100 mW EIRP
S.BUS port: S.BUS / S.BUS2
Voltage range: 3.7 - 8.4 V
Weight: 21.0 g
Dimensions: 50 x 37 x 15 mm
