120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Paramotor BackPack XXS 2
1 x	Núcleo del rotor
1 x	Varilla de mando para la cabeza del rotor
1 x	Arandela de la rueda
1 x	Paneles Laterales
2 x	Hélice POWER-PROP 7x7
2 x	Polo Hispano Aviación
2 x	Chaqueta Hispano Aviación
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Casquillo para grimpar cable de 1,3 mm (10 pcs)
1 x	Listón de CAOBA 3,0x3,0x1000 mm
1 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x	Cable acero trenzado Ø 0,62 mm (10 m)
1 x	Brazo direccional 12 mm Ø 4 mm ( 2 uds)
2 x	Cinta fibra vidrio 25 mm
1 x	Varilla ABS 1,0x1000 mm
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Abrazadera 2.5x100 (20 uds)
1 x	Listón de PINO 5,0x5,0x1000 mm
1 x	Cinta Goldfix 1m
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	Varilla acero roscada M3 -1m
2 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Liston ABS 1,5x2,0x1000 mm
1 x	Cable acero trenzado Ø 0,5 mm (20 m)
1 x	Cierre cabina "One touch"
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x	Varilla ABS 1,25x1000 mm
1 x	Soporte para bridas de hasta 3 mm (10 pcs)
2 x	Cinta tubuladora (5 m)
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Cierre de plástico para cabinas
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	Brazo direccional 12 mm Ø 4 mm
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Liston ABS H 1,5x1,5x330 mm
1 x	Varilla ABS 2,5x1000 mm
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Listón de PINO 10x10x1000 mm
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
2 x	Sistema cierre 350 mm con abrazadera (2 pcs)
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Sistema cierre 240 mm con abrazadera (2 pcs)
1 x	Listón de NOGAL 1,5x1,5x1000 mm
2 x	Palas de autogiro de 330 mm
1 x	Horn de mando 5/10 con rótula M2
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Conector banana oro 2,5 mm (pareja)
1 x	Horn corto de latón M4 para cable (4 pcs)
1 x	Horn de mando largo con rodamiento (2 ud)
1 x	Perfil de ABS de media caña 6,0x1000 mm
1 x	Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x	Conjunto de mandos arriostrados
1 x	Copiador 5 unidades de 20 cm
1 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Tubo ABS 20,0x18,0x1000 mm
1 x	Gafas Zurich Sport Sunglasse Dark Sensity BROWN
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Gafas Flitemaster
1 x	Destornillador allen 3,0x60 mm molibdeno
1 x	Conector JR Servo macho (10 pcs)
1 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Hélice 3x3
1 x	Plancha contrachapado Abedul 600x300x1,2 mm
1 x	BETA 1400 ARF Red
1 x	Cinta fibra vidrio 38 mm
1 x	Hélice 9x7 SlowFlyer
2 x	Helice 8x4 Electric
1 x	Chaleco Hispano Aviación
1 x	Gorra Hispano Aviación
2 x	Tuerca M2
1 x	Sistema cierre HACKER 300 mm con abrazadera (2 pcs)
1 x	Sistema cierre 450 mm con abrazadera (2 pcs)
1 x	Conector MR-60 (pareja)
1 x	Abrazadera con letrero (20 pcs)
1 x	Cono 50 mm aluminio (Kavan)
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Conector MT-60 (pareja)
1 x	Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x	Cono 55 mm aluminio (Kavan)
1 x	Sistema cierre Mini 14x60 mm (4 pcs)
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Cono 45 mm aluminio (Kavan)
1 x	Plancha contrachapado Abedul 600x300x2,5 mm
1 x	Cono 60 mm aluminio (Kavan)
1 x	Cargador SKY RC e680
1 x	Prisionero 2 mm Ø (4 uds)
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Actuador lineal HLS12-100210-7.4v
2 x	Anemometro Xplorer1
1 x	Plancha carbono 350x150x1.5 mm
1 x	Eje ruedas 4x21 mm (2 uds)
1 x	SkyMaxx 1.550 mm (kit)
1 x	Plancha de goma espuma (310x210x3 mm)
1 x	Tubo Pitot para PIXHAWK
1 x	Plancha de goma espuma (310x210x8 mm)
1 x	Plancha fibra vidrio 350x150x2.5 mm
1 x	Prisionero 4 mm Ø (4 uds)
1 x	Plancha fibra vidrio 350x150x3.0 mm
1 x	Prisionero aluminio 6 mm Ø (4 uds)
1 x	Plancha carbono 350x150x5.0 mm
1 x	Eje ruedas Ø 5 mm (2 uds)
1 x	Plancha carbono 550x350x2.5 mm ECOTECH
1 x	Amortiguador FEMA 300 Newtons
1 x	ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x	Amortiguador FEMA 100 Newtons
1 x	Perfil Acero Inox. 11.5x6.5x1000 mm
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Perfil Acero Inox. 12.3x7.7x1000 mm
1 x	Canal de ABS de 3,0x6,0x1000 mm
1 x	Pipa BULL MØ1 2.600mm
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Set asiento-piloto LA500
1 x	Hélice CAM-Carb-Light 11x5" (Hélice derecha)
1 x	Hélice 3x2
1 x	Hélice CAM-Carb-Light 12x5" (Hélice izquierda)
1 x	Hélice 8x4,3 SlowFlyer
1 x	Hélice 10x4,7 SlowFlyer
1 x	Hélice CAM-Carb-Light 10x7"
1 x	Hélice CAM-Carb-Light 11x5" (Hélice izquierda)
1 x	Hélice CAM-Carb-Light 9x6"
1 x	Juego de hélices 5x3 Multicopter (2cw+2ccw)
1 x	Eje ruedas Ø 6 mm (2 uds)
1 x	Plancha carbono 350x150x4.0 mm

4,904.77EUR