120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Fibra carbono tela 160g/m2 127 cm x 1 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x	Bolsa vacio 1200 mm x 50 m
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m
1 x	Arrancador EM Gear Power 80
1 x	Cargador POWER PEAK D7 EQ-BID 12V/230V-Duo
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
3 x	Cargador USB 12V DC para coche
2 x	Tren aterrizaje Electrico "Black Edition" ULTIMATUM 3.0 (Electro
2 x	Adaptadores carga 6s JST-XH
2 x	Crimpadora
1 x	Extension MPX-MPX 20 cm
4 x	Cargador USB 120-240V AC
2 x	Ferrita 27x14x7 mm
1 x	Ferrita 17x10x6.5 mm
1 x	Bayoneta aluminio/strongal D25 mm/1 m
1 x	Piloto "Dick" Legends Series(Slimline)
1 x	Piloto civil "G-Man" tamaño 9cm (Slimline)
3 x	Piloto militar "Kamikaze" tamaño 9cm (Slimline)
1 x	Piloto 1/6 "Garry"
2 x	Piloto 1/12 "Fighter"
2 x	Piloto militar "Fly Boy" tamaño 9cm (Slimline)
1 x	Piloto civil "Joe" tamaño 9cm (Slimline)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Piloto WWII US Navy Pacific 12" Sclae 1/6-1/5
1 x	Piloto civil "Curt" tamaño 9cm (Slimline)
1 x	Piloto 1/6 "Tony"
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Piloto LUCAS ARTF
1 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Monokote AZUL metalizado (1.8x0.65m)
1 x	Funda Protectora cables Ø 10 mm 1000 mm
1 x	Cargador para AA/AAA Ni-MH & Ni-Cd
1 x	Cristal TX 35.050 Ch 70
2 x	Morro OPTIMA 2.200 mm (Elec ó Planeador)
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	Bayoneta ULTIMATUM 2.0 m
1 x	Piloto 1/12 "Tom"
1 x	Piloto "Duke" Legends Series(Slimline)
1 x	GPS Sensor + Logger OPTronics
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	USB Adaptor OPTronics
1 x	Motor KAVAN PRO 2225-1600
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	Perfil de ABS de media caña 4x2.5x1000 mm
1 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Perfil de ABS triangular 2.0x1000 mm 90º
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Servo SAVOX SB-2272 SG Highvoltage brushless (Rotor de cola)
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Piñon motor rotor LA-500
1 x	Piloto LA 500
2 x	Bisagra de compuerta aluminio (1 pcs)
2 x	Bisagra 15 mm reforzada
2 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
2 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra pin 39x20 mm (10 uds)
2 x	Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x	Piloto 1/6 "Buddy"
1 x	Piloto 1/12 "Cougar"
2 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Piloto 1/7 "Japonés"
1 x	Piloto JET 1:3,5
2 x	Activador CA 150 ml
1 x	Cono 40 mm aluminio (Kavan)
1 x	Ball link M2 (10 pcs)
1 x	Ciano KAVAN Super Thin 20g
1 x	Chispometro glow 1.3 Ah
1 x	Cargador SKY RC T400Q Charger 4x100w
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Chispometro con cargador
1 x	Conector universal carga chispometro
2 x	Bisagra papel lite CA (12 uds)
1 x	Bomba electrica Fuel 12v
1 x	BETA 1400 RTF Red
1 x	Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Cono 40 mm plastico negro (Kavan)
2 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	BETA 1400 ARF Red
1 x	Bisagra pin 26x11 mm (10 uds)
3 x	Ciano KAVAN Medium 20g
1 x	Combustible KAVAN CAR 25% 1 litro
1 x	Ciano KAVAN Thick 20g
1 x	Bomba combustible manual gas/glow
2 x	Conector MT-60 (pareja)
2 x	Bateria LiPo GRE18 600 mAh 7.4v
1 x	Conector XT60 macho empotrar (2 pcs)
1 x	Aceite rodamientos 25 ml
1 x	Cargador SKY RC e680
1 x	Bancada motor clase 48"
1 x	Morro metálico PROJETI
1 x	Bancada motor VANQUIST 48" F3A
1 x	PARKMASTER PRO Kit + (RR)
1 x	EASYGLIDER 4 RR
1 x	LASER 73" 1.85m (05) PILOT
2 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x	LENTUS MultiplexTren aterrizaje
1 x	LENTUS MultiplexHelice 8x6
1 x	Antena MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x	Interruptor Magnetico MULTIPLEX
1 x	Cono 42 mm EXTRA 330SC
1 x	Maleta aluminio MULTIPLEX MLink
1 x	Interruptor On/Off Corto micro
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Hélice POWER-PROP 14x9
1 x	DUPLEX 2.4EX Central Box 210
1 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Perfil goma 10-2 mm 2M
1 x	Perfil Acero Inox. 9.0x5.0x1000 mm
1 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
1 x	Bisagra 25 mm reforzada
1 x	Bisagra de nylon 15x0,3 (10 pcs)
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x	Set helices cuadricoptero tipo 400 (2R+2L)
1 x	Perfil de ABS triangular 6.0x1000 mm 90º
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Canal de ABS de 2,0x4,0x1000 mm
1 x	Ferrita con funda
1 x	Servo SAVOX SB-2270 SG Highvoltage brushless
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Perfil goma 6-2 mm 2M
1 x	Bisagra de compuerta/Flaps
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	Bisagra 18 mm reforzada
1 x	Bisagra de nylon 20x15x0,3 (10 pcs)
1 x	Bisagra pequeña con pin metalico (12 uds)
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Bisagra de nylon 20x20x0,3 (10 pcs)
1 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x	Bisagra Micro flexible (12 uds)
1 x	Bisagra de Flaps (6 uds)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x	Bisagra papel CA (12 uds)
1 x	Prolongador 90 cm (Futaba)
1 x	Rueda superlight deluxe 56 mm (2 pcs)
1 x	Porta kwiw link M2 (10 pcs)
1 x	Rueda superlight deluxe 68 mm (2 pcs)
1 x	Microbalones relleno CA 20g
1 x	Bancada para motores .09 - .19
1 x	Plancha contrachapado Abedul 600x300x0,8 mm
1 x	Portapalas metal LAMA
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Terminales riostras M3 (10 uds)
1 x	Fija tornillos KAVAN Azul "medio" 10 ml
1 x	Prolongador 30 cm (Futaba)

11,889.66EUR