130.00EUR

Gafas FPV Eachine EV800D
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP
A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


pocas unidades
pocas unidades

Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
3 x Brazo servo doble alu. RHINO
3 x Servo RHINO pro SHV digi 4
1 x Recambio lonas Hovercraft
1 x Servo NARO Max Std
1 x Arandela dentada 2.7 mm (20 pcs)
2 x Circlick para eje 1.9 mm (10 pcs)
1 x Liston ABS 2.0x10.0x1000 mm
1 x Arandela conica ancha alumino M4 Negro (4 pcs)
1 x Arandela conica alumino M4 rojo (8 pcs)
1 x Arandela conica alumino M3 verde (8 pcs)
2 x Arandela abierta 2.6 mm (20 pcs)
1 x Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x Liston ABS 1,5x6,0x1000 mm
1 x Arandela de bloqueo 3.5 mm (10 pcs)
1 x Liston ABS 1,0x2,0x1000 mm
1 x Liston ABS 2.0x8.0x1000 mm
1 x Arandela conica alumino M3 negro (8 pcs)
1 x Varilla ABS 2,0x1000 mm
1 x Liston ABS 1,0x3,0x1000 mm
1 x Varilla ABS 6,0x1000 mm
1 x Arandela conica ancha alumino M4 Azul (4 pcs)
1 x Arandela 4.3 mm (20 pcs)
1 x Liston ABS H 2,0x2,0x330 mm
1 x Arandela dentada 3.2 mm (20 pcs)
1 x Arandela dentada 2.2 mm (20 pcs)
1 x Arandela 1.7 mm (20 pcs)
1 x Liston ABS 1,0x4,0x1000 mm
1 x Varilla ABS 3,0x1000 mm
1 x Arandela M3 negra (4 pcs)
1 x Arandela de bloqueo 2.5 mm (10 pcs)
1 x Arandela de goma M3-M4 (8 pcs)
1 x Varilla ABS 5,0x1000 mm
1 x Arandela conica ancha alumino M3 azul (4 pcs)
2 x Liston ABS 2.0x3.0x1000 mm
1 x Circlick para eje 1.5 mm (10 pcs)
1 x Liston ABS 1,5x4,0x1000 mm
1 x Brazo direccional 12 mm Ø 4 mm
1 x Cierre cabina
1 x Cable acero trenzado Ø 0,62 mm (10 m)
2 x Cable pull pull SUS 3m + cierres
1 x Cierre de plástico para cabinas
1 x Brazo direccional 12 mm Ø 4 mm ( 2 uds)
2 x Bancada servo gancho
1 x Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
1 x Cierre cabina 33/23.5mm (2 uds)
1 x Gancho de lanzamiento fijo
1 x Cierre cabina "One touch"
1 x Cable acero trenzado Ø 0,5 mm (10 m)
2 x Brazo direccional 16 mm Ø 3 mm ( 2 uds)
1 x Gancho de remolque hasta 4,5 m
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Casquillo para grimpar cable de 0,70 mm (10 pcs)
2 x Acoplador de aluminio para tubo de carbono 6/M4
2 x Brazo direccional 16 mm Ø 4 mm
1 x Cable acero trenzado Ø 0,5 mm (20 m)
1 x Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x Abrazadera 3.2x142 (20 uds)
1 x Casquillo para grimpar cable de 0,85 mm (10 pcs)
2 x Abrazadera 2.5x100 (20 uds)
1 x Casquillo para grimpar cable de 1,3 mm (10 pcs)
1 x Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
1 x Paracaídas de seguridad 1,8 m2
1 x Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x GameCommander USB Universal
1 x Horn aluminio negro LH largo L31xH30 (2pcs)
1 x Varilla carbono 1.0 mm x 1000 mm
1 x Listón de PINO 1,5x3,0x1000 mm
1 x Tubo ABS 12,0x10,0x1000 mm
1 x Brazo servo aluminio V2-Futaba 1,75" M3 rojo
1 x Bomba de vacio P1-N
1 x Tuerca autoempotrable M4 (4 pcs)
1 x Tuerca autoblocante M3 aluminio (4 pcs)
1 x Tornillo Servos M3x16 aluminio anodizado rojo (4 pcs)
2 x Tuerca para insertar M3 (4 pcs)
1 x Tuerca autoblocante M2 (20 pcs)
3 x Tornillo Servos M2x7/16 (4 pcs)
1 x Rueda KOVO SLH 120x60 mm
2 x Tornillo M2.9x9.5 (10 pcs) Especial cabinas, tapas servos
1 x Tuerca autoempotrable M3 (4 pcs)
2 x Tornillo allen M3x9 mm (4 pcs)
1 x Tornillo Servos M4x5/8 aluminio anodizado negro (4 pcs)
2 x Tornillo M2x8 PH
3 x Tornillo M2x8 PH cabeza abellanada
1 x Tuerca hexagonal M4 (20 pcs)
1 x Tornillo allen M2x8
1 x Tuerca para montaje M5 (4 pcs)
2 x Tornillo M3x0,5x6 mm Cabeza Plana Titanio (4 pcs)
1 x Bateria arranque incl. compresor inflado
2 x Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x Tuerca para montaje M3 (4 pcs)
2 x Tornillo Servos M4x5/8 aluminio anodizado azul (4 pcs)
1 x Tuerca autoblocante M2 (10 pcs)
1 x Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado lila (4 pcs)
1 x Tornillo M2.2x9.5 (10 pcs) Especial cabinas, tapas servos
1 x Tuerca autoblocante M5 (10 pcs)
1 x Tornillo Servos M4x5/8 aluminio anodizado lila (4 pcs)
1 x Programador 5v SIO RS 232
2 x Tornillo M4x0,7x25 mm Cabeza Botón alum. anodizado azul (4 pcs)
2 x Tornillo M1,6x6 (10 pcs)
2 x Tornillo allen M4x30 (10 pcs)
2 x Tornillo allen M4x20 (10 pcs)
1 x Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Soporte conector MPX empotrado (6 pcs)
1 x Liston ABS 1,5x2,0x1000 mm
1 x Gancho de lanzamiento regulable
1 x Led (verde - 2 pcs)
2 x Tornillo M2.5x10 (10 pcs)
1 x Soporte Angular conector XT-60 (2 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Liston ABS 1,5x8,0x1000 mm
1 x Planeador PIROL
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
2 x X-RAY Micro QR (Profundidad)
1 x Soporte servo KST X08/H and Plus
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Gafas Nimbus "Black"
1 x Gafas Zurich Sport Sunglasse Dark Sensity BROWN
1 x Gafas Moritz
1 x Servo FUTABA S 3072 HV S-Bus
1 x Servo FUTABA BLS175 SV
1 x Planeador STROLCH
1 x E-FUN BUG (ROI-Import)
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Servo KST X08 Plus 9g HV servo
1 x PIX Hawk con accesorios
1 x Sensor digital Air Speed con Pitot
1 x Pin corto M2 (10 uds)
2 x Gancho de remolque + 4,5 m
1 x Desdoblador de mando 3mm (2 pcs)
1 x Desdoblador de mando 2mm (2 pcs)
1 x Bomba electrica combustible
1 x Protector punta ala 30x10 (2 pcs)
1 x Protector punta ala 38x10x12 (2 pcs)
1 x Prisionero 2 mm Ø (4 uds)
1 x Varilla mando doble roscada aluminio M2,5 60 mm (2 pcs)
1 x Varilla mando doble roscada aluminio M2,5 40 mm (2 pcs)
1 x Pasacable de goma Ø 4 mm (4 uds)
1 x Soporte Flybar metal LAMA
1 x Shaft sleeve LAMA
1 x Portapalas metal LAMA
1 x Pala carbono 230 mm
1 x Tornillo M2x8 (10 pcs)
3 x Tornillo M3x0,5x12 mm Cabeza Plana Titanio (4 pcs)
1 x Tuerca para montaje M2 (4 pcs)
1 x Círculo autoadhesivo 12 mm (49 pcs)
1 x Tornillo KB 1.4x6 mm (10 pcs)
2 x Tornillo allen M2,5x12
1 x Led Flash (naranja - 2 pcs)
1 x Liston ABS I 3,5x1,75x330 mm
2 x Tornillo M2x6 (10 pcs)
1 x Tuerca autoblocante M2 aluminio (4 pcs)
2 x Tornillo M3x0,5x20 mm Sokect Head aluminio anodizado lila (4 pcs
2 x Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x Tuerca para montaje M6 (4 pcs)
2 x Tornillo allen M2.5x20 (10 pcs)
1 x Tornillo allen M2.5x5 (10 pcs)
1 x Tornillos 2,2 x 6,5 mm (20 pcs)
1 x Tornillo nylon M4x20
1 x Tornillo Servos M4x5/8 aluminio anodizado plata (4 pcs)
1 x Tornillo Servos M2x5/16 (4 pcs)
1 x Liston ABS I 2,5x1,25x330 mm
1 x Tornillo M1,6x8 (10 pcs)
1 x Círculo autoadhesivo 15 mm (30 pcs)
1 x Tuerca para insertar M5 (10 pcs)
1 x Arandela abierta 4.1 mm (20 pcs)
1 x Tornillo allen M2x12
1 x Servo ROBBE FS-31 Pico Servo
1 x Servo Robbe FS 128 BB MG HV Digital
3,023.91EUR
Fabricantes
Información del Fabricante
Roi-Import
Roi-Import Página Principal
Otros productos
Idiomas
Español English
Monedas