47.90EUR

Servo GO-1023MG 7.0 kg.cm 0.09s/60º
[KAV201023MG]


Very strong and thin (10mm) programmable digital micro servo 23g with metal gears and wide range of supply voltage (4,8-8,4V), 2xBB, ideal for ailerons and flaps of gliders. 4.5kg.cm torque, 0.14s/60° speed at 4.8V, 5.2kg.cm torque, 0.12s/60° speed at 6.0V, 6.5kg.cm torque, 0.10s/60° speed at 7.4V. Aluminum servo case for perfect cooling under high load

Very powerful programmable digital micro servo with steel gears and with output shaft mounted on two ball bearings for use in RC models of all types. Thanks to its flat servo case with height of 10 mm, it is particularly suitable for controlling ailerons and flaps in RC glider models with thin wing profiles. The servo is housed in an aluminium case for perfect cooling even under high loads.With the help of the USB programmer/interface for GO servos and the PC operator program you can program a wide range of servo parameters (servo end-points, servo reverse and neutral position, overload protection, soft start, fail-safe, etc.).
Programmable functions
Servo angle: Used to set the maximum travel of the servo. Default setting is approx. 120° at normal control pulse width range (900~2100 µs); approx. 180° at maximum allowed control pulse width range (500~2500 µs).
Servo Neutral: Used to set the neutral (center) position of the servo.
Damping Factor: Sets the servo's stopping behavior characteristic.
PWM Power: Sets the output power of the servo. As higher the value is, the faster the servo is and the more thrust it has - of course, the current draw will be proportionally higher. Range: 39.2~100%
Sensitivity: Adjusts the sensitivity (insensitivity bandwidth) of the servo. The higher the value - the narrower the insensitivity bandwidth - the servo will only move if the change in control signal width is greater than the insensitivity bandwidth. Setting the sensitivity value too high can cause the servo to oscillate in some applications. Range: Ultra High (Extra High - sensitivity bandwidth approx. 1 µs) - High (High - approx. 2 µs) - Medium (Medium - approx. 3 µs) - Low (Low - approx. 4 µs)
Soft start: Enables/disables the soft start function. This function prevents the servo from abruptly moving into the operating position after power is turned on, thus reducing the risk of damage to the servo gears.
Inversion: Reverses the sense of servo movement.
FUTABA SR mode: Used only with FUTABA RC system working in SR mode. Do not turn this option on if you are using a different FUTABA RC system setting or any other brand of RC system.
SANWA SSR mode: Used only with SANWA RC system working in SSR mode. Do not turn this option on if you are using a different SANWA RC system setting or any other brand of RC system.
Fail-safe: If the control signal from the receiver is completely lost or if the servo cannot detect the signal properly (e.g. due to interference), the servo may enter one of three fail-safe modes:
(a) Free: Fail-safe is disabled.
(b) Maintain Position: the servo maintains the position corresponding to the last correctly received signal.
(c) Transition to neutral: The servo returns to the neutral (1500 µs pulse width) position.
Overload protection: enables or disables servo overload protection in three levels - once the overload has lasted for a preset time (in seconds), the servo output power is limited to the corresponding preset value (in % of max power).
Reset: Restores the connected servo to its factory default settings.
Extended supply voltage 4.8-7.4 V (nominal).Output shaft with 25 teeth.
Servo dimensions Micro
Servo type Digital
Thrust at 4.8V [kg/cm] 4.5
Thrust at 6.0V [kg/cm] 5.2
Thrust at 7.4V [kg/cm] 6.5
Thrust at 8.4V [kg/cm] 7
Speed at 4.8V [s/60st.] 0.14
Speed at 6.0V [s/60st.] 0.12
Speed at 7.4V [s/60st.] 0.1
Speed at 8.4V [s/60st.] 0.09
Servo gears Metal
Ball bearings 2×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 30
Width [mm] 10
Height [mm] 30.5
Weight [g] 23
Intended for Aeroplanes


pocas unidades
pocas unidades

Comentarios
Categorías
* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
  3D IMPRESION
  Actuadores
  Adaptadores->
  Altimetros->
  Amperímetros
  Anemómetros
  Auto-Pilot
  Banco pruebas
  Baterías->
  Bayonetas
  BEC/Cables/Conector/
Interrup

  Bisagras
  Cables
  Cajas de vuelo
  Camaras->
  Cargadores->
  Catalogos
  Catapultas/Bungees
  Centralitas/Registro de Datos->
  Cintas/Cierres/Bridas
  Combustible->
  Conectores
  Conos/Muletas->
  Emisoras/ Radios/Receptores->
  Extintores
  Extractores piñones
  Ferritas
  Fibra/Carbono/Planchas/Malla/ABS
  Fundas
  Gafas
  Hardware
  Helices->
  Herramientas
  Horns mando
  Humo/Cohetería/Pirotecnia
  Instrumentos/ Paneles
  Linkages/Clevis
  Luces/Iluminacion->
  Maderas/ Listones
  Merchandising
  Pegamentos/Resinas/Epoxy->
  Pegatinas
  Perfiles
  Pilotos
  Prolongadores
  Recubrimientos/Termorretráctil
  Reguladores / Variadores->
  Remolque
  Rótulas
  Ruedas/Ejes->
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    Mikado
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronicos
  Simuladores
  Soportes/CG/Incidenc.
  Sprays/Pinturas/Barnices/Pastas
  Tornilleria
  Trenes de aterrizaje->
  Tubo Carbono/Latón/Acero/Alu
  Varilla Acero/Latón/Alum
  Varilla carbono
  Varillas-Listones ABS
Coches / Trucks->
Motores y Turbinas->
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Horn largo de latón M2 para cable (10 pcs)
1 x Horn de mando 6/27 con rótula M3
1 x Horn aluminio anodiazado 6 mm azul con rótula
1 x Conjunto de mandos arriostrados
1 x Varilla mando roscada M2,5 (2 uds)
1 x Horn de mando 6/35 con rótula M3
1 x Horn corto de latón M2 para cable (2 pcs)
1 x Horn micro type4 Ø 0,5(2 pcs)
1 x Horn de mando variable inclinado 5 mm M2
1 x Horn DUBRO 1/2A
1 x Horn control flaps (1 pcs)
1 x Cable con accesorios
1 x Horn de mando 6/20 con rótula M3
1 x Horn de mando extra-largo ajustable aluminio 2,8x34
1 x Horn de mando 5/10 con rótula M2
1 x Horn 20x28,5 mm (2 pcs)
1 x Horn F3A de Titanio 16 mm (2 uds)
1 x Horn de mando carbono 20 mm
1 x Horn de mando duraluminio F3A 30x10x23,5 mm (2 pcs)
2 x Horn mando DU-BRO 1/2 (2 pcs)
2 x Horn de mando variable 5 mm M2
1 x Horn de mando 5/20 con rótula M2
1 x Horn corto de latón M4 para cable (10 pcs)
1 x Horn 13,5x16 mm (2 pcs)
1 x Horn aluminio roscado 6 mm con rótula
2 x Horn de mando largo con rodamiento (2 ud)
1 x Horn mando long (2 pcs)
1 x Horn aluminio anodiazado 6 mm rojo con rótula
1 x Horn extra largo 60x30
2 x Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x Oracover Amarillo CADMIO 10 m
1 x Oratex Red Fokker 10 m
1 x Horn largo 50x26
1 x Oracover Rojo 2 m
1 x Oracover Amarillo CUB 10 m
1 x Oracover Marrón 2 m
1 x Horn largo de latón M2 para cable (2 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Horn micro T2 Ø 1 (2 uds)
1 x Horn de mando variable inclinado 6 mm M3
1 x Oratex Silver 2m
2 x Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
1 x Bisagra cilíndrica 4,5 Ø x 12 x 76 mm (10 pcs)
1 x Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x Bisagra de compuerta 30x16 mm (2 pcs)
1 x Bisagra correa de latón en miniatura 1m
1 x Brazo direccional 12 mm Ø 4 mm
2 x Bisagra larga con pin metalico (6 uds)
2 x Cierre cabina "One touch"
1 x Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
2 x Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
2 x Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
2 x Acoplador de aluminio para tubo de carbono 6/M4
1 x Cierre cabina V1 M3 Azul (2 pcs)
2 x Cable acero trenzado Ø 0,52 mm - 15 kp (10 m)
1 x Bisagra 18 mm reforzada
1 x Brazo direccional 16 mm Ø 3 mm
1 x Bisagra Larga flexible (12 uds)
1 x Cierre cubiertas o carenados
1 x Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x Cable pull pull SUS 3m + cierres
1 x Bisagra de aluminio desmontada 6x98 mm (2 pcs)
2 x Cierre cabina
1 x Bisagra pequeña con pin metalico (12 uds)
1 x Cable acero trenzado Ø 0,5 mm (2 m)
1 x Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x Brazo direccional 16 mm Ø 4 mm
1 x Brazo direccional 16 mm Ø 4 mm ( 2 uds)
2 x Bisagra cilíndrica 4,5 Ø x 12 x 67 mm (10 pcs)
1 x Cierre cabina V1 M3 Rojo (2 pcs)
1 x Brazo direccional 12 mm Ø 4 mm ( 2 uds)
1 x Bisagra 25 mm reforzada
1 x Casquillo para grimpar cable de 1,3 mm (10 pcs)
1 x Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
2 x Bisagra de nylon flaps 33x9 (2 pcs)
1 x Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x Bisagra larga con pin metalico (12 uds)
1 x Bisagra de compuerta aluminio (1 pcs)
1 x Conector banana oro 2 mm
1 x Varilla carbono 4.0 mmx1000 mm
1 x Conjunto bieleta 45 mm para dirección
2 x Soporte grifo FESTO vertical (1 pcs)
2 x Pin M1 (10 uds)
2 x Bisagra pin 34x16 mm (10 uds)
1 x Varilla mando doble roscada SUS303 M2.5 70mm (2 pcs)
1 x Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x Salida para cables 41x5,5 mm (2 pcs)
1 x Conector "T" 6-6-6 mm tubo bomba vacio
1 x Brazo servo de carbono 25 mm
1 x Piloto 1/6 "Cindy"
1 x Tapon deposito 18mm (Espiga doble integrada)
1 x Cinta Roving carbono 20m
1 x Servo Fork
1 x Enganche de las palas del rotor
1 x SATORI 2 PRO V C64 F5J
1 x Piloto "Goose" (Slimline)
2 x Piloto 1/12 "Fighter"
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Piloto 1/6 "Buddy"
2 x Piloto "Adolf" Legends Series(Slimline)
1 x Piloto civil "Pamela" tamaño 9cm (Slimline)
1 x Piloto JAN 1/4 Veleros
1 x Piloto 1/4 "Mike"
1 x Piloto "Anthony" (Slimline)
1 x Sistema cierre baterías 20x200 mm
1 x Cono INO de 102 mm (Imitacion carbono)
1 x Tapon deposito 22 mm (Espiga doble integrada)
1 x Piloto 1/4 "Heidi"
1 x Rueda 152x46 centro aluminio Ø6.0 mm
1 x Piloto 1/12 "Langley"
1 x Rueda 127x43 centro aluminio Ø6.0 mm
1 x Cable acero trenzado Ø 0,62 mm (10 m)
1 x Soporte frontal tren de aterrizaje 29x26x13,5
1 x Brazo direccional 16 mm Ø 3 mm ( 2 uds)
1 x Cierre para cable de acero diam. 0,5 (10 pcs)
1 x Bisagra pin 26x11 mm (10 uds)
1 x Conjunto bieleta 90 mm y rótulas T. para dirección
1 x Set bisagras indoor con horns integrados
1 x Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x Bisagra Robart flaps/compuertas metal (2 pcs)
1 x Bisagra pin 39x20 mm (10 uds)
1 x Conjunto bieleta 100 mm para dirección
1 x Pin largo M2 (10 uds)
1 x Anclaje varilla mando M2 mm prisionero/tuerca (2 uds)
1 x Bisagra PIN mediana (12 uds)
1 x Bisagra Redonda flexible (12 uds)
1 x Soporte bomba/flitro Xicoy X45
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Soporte bomba Xicoy X45
1 x Soporte conector MPX empotrado (6 pcs)
1 x Plancha carbono 350x150x3.0 mm
1 x Soporte Angular conector XT-60 (2 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Soporte Pitot JETI
1 x Soporte ECU Xicoy X-45
1 x Soporte FUEL DOT V3
1 x Soporte conector MPX (6 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
5,961.22EUR
Fabricantes
Información del Fabricante
Kavan
Otros productos
Idiomas
Español English
Monedas