900.01EUR

CYCLONE XT 6.2m ARF
[ROBBE2665]

CYCLONE XT 6.2m ARF

Description "Robbe Modellsport Cyclone XT 6,2M ARF mit GDRP FUSELAGE 4-piece wing with abachi planking"
The CYCLONE XT is the consistent further development of its predecessor CYCLONE. With an incredible wingspan of 6,20m, it is the giant in the electric glider sky! The epithet XT stands for "extended". The model has a painted GRP fuselage and two 2-piece wings with Abachi planking and GRP carpet pad. Its new LS 6330-15 brushless drive is rated for 8S LiPo operation for powerful climbs and easy takeoff from the launch trolley.
The outer wing design, electrical wing mating using MPX connectors in mounting frames and the new LS 6330-15 long shaft drive motor are the main features of the new Cyclone XT, along with the increased wingspan. The canopy latch has been moved to the rear under the wing/fuselage moldings as is common with large scale model gliders.
The successful HQ/W airfoil has been left in place. It runs from an HQ/W-2.5/12 at the root rib to an HQ/W-2.5/11 in the center and finishes at the winglet with an HQ/W-3/10.5. This is an excellent way to fly extended thermal flights, as this is the CYCLONE XT's profession. The flight characteristics are as usual good-natured and quiet.

Features:
- New Ro-Power Torque LS 6330-15 drive for 8S LiPo (PNP version only).
- Two-piece fuselage made of GFRP/Kevlar reinforced with CFRP
-Wings completely covered with abachi for high compressive strength
-Ready covered with ORACOVER®
-Four-part wing, separable
-Wings pluggable with MPX connectors in mounting frame for electrical connection (PNP version only)
-Solid 14x500mm round steel mating of the inner surfaces, 12x375mm carbon mating for the outer wings
-Middle wings on the upper side completely underlaid with 200g carbon fabric, underside 80g glass fabric
-Outer wings completely underlaid with 80g glass mat
-New canopy lock under wing
-High quality M3 linkage accessories Made in Germany
- Stable elevator linkage with 5/3 mm CFRP tube and M3 clevises
-Reinforced tail construction
-Continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
-Precisely fitted anti-twist devices in all wing sections
-High degree of prefabrication

Technical data
Airfoil: HQW
Building Skill: Fortgeschritten
Control: H,S,Q,M,WK
Drive Type: Electro
Flight Skill: Profi
Flight weight approx. (g): 11400
Fuselage: Fiberglass/Carbone
Length (mm): 2250
Manufacturer: Robbe
Rec. battery: 8S/5000-7000mAh LiXX
Rec. engine: Ro-Power Torque LS 6330-15
Version: ARF - ALMOST READY TO FLY
Wing-span (mm): 6200
Wings: Styro/Glass/Abachi

Box contents
- Model CYCLONE XT largely prefabricated
- Two-piece fuselage made of GRP/Kevlar CFRP reinforced
- Abachi planked wings, GRP/CFRP reinforced
- Ready covered with ORACOVER
- Assembly instructions in German/English/French

Das Produkt Cyclone XT 6,2M ARF mit GFK Rumpf, von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 6200 sowie ein Gewicht von 11400. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 8S/5000-7000mAh LiXX Akku für dieses Elektroflugmodell.

under request

Reviews

Quick Find

Shopping Cart

1 x	Xplorer2 anemometro
1 x	Xplorer4 anemometro
2 x	Xplorer1 anemometro
1 x
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	6 mm blue aluminium threaded horn with patella
1 x	Solvent Plasti Dip 1000 ml
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Premium servo extension 50cm
2 x	Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x	Electronic fog horn
1 x	ALMIRALSANKER anchor 40 mm (2 uds)
1 x	Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
2 x	Mounting base Ms 8 mm
2 x	Bandera Frankr 4x6
2 x	Ancla Met. 16 mm (5 pcs)
2 x	Anchor of tow Met. 60 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Servo NARO Max Std
1 x	Suction funnel for carburetor 90D-M (red)
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Rudder forward 90x28 "type Kato"
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Small adjustable control horn with bearing
1 x	Short adjustable control horn 3x24
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	Straightened threaded rod M2-1m
1 x	Aluminium ignition bad (blue)
1 x	GLOW 2C + accesories
1 x	GLOW 9C + accesories
1 x	Selfstarr EME35
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Threaded insert M5 (10 pcs)
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Threaded insert M4 (4 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Small aluminium horn blue (2pcs)
1 x	Rudder forward 80x28 "type Kato"
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	Rudder forward 70x28 "type Kato"
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Angle support XT60 conector
1 x	Support conector MPX (6 pcs)
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	Compact on-board starting system (9512)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	GLOW 5C + accesories
2 x	Pitts Muffler kit for CAP 21
1 x	O-ring Saito FG-73 5cyl
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Giant Scale Muffler D.A. 70
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Sparkplug Saito 400
1 x	Air Trap Mounting - 175ml
1 x	Conector FESTO M3 Quick 3mm 90º
1 x	Sparkplug 1/4-32 Glow
1 x	Electric Fuel Pump 12V
1 x	1000 ccm gasoline fuel tank
3 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	100 mm rods + T patellas set for direction control
1 x	250 mm / 16 mm Airbrakes
1 x	Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller)
1 x	Propeller Ms 65L (left propeller)
1 x	Cable grommet Ø 4 mm (4 uds)
2 x	28 mm turnbuckle
1 x	40,0 mm hydro-propeller (left hydropropeller)
2 x	25 mm fenders (10 pcs)
1 x	42,0 mm propeller (left propeller)
2 x	290 mm M5 Prop shaft
2 x	Connectors MPX male
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	La Capitania di Venetia accesories
1 x	Rigid coupling brass Ø 3 mm L: 20 mm
1 x	Coupling bush 5 - 5 mm
1 x	Anchor 25 mm (2 uds)
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	Socket Head Screw M2x12
1 x	45 mm rods + T patellas set for direction control
1 x	Propeller RABOESCH M4 55 mm (5 Blades) (Left hydropropeller)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Clip fixing for wing (2 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller)
1 x	Propeller RABOESCH M5 0 mm (4 Blades) (Right hydropropeller)
1 x	Propeller Helice 4BL 70 mm M4 plastico Dcha
1 x	12 mm portholes (10 pcs)
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	12 mm mast holder
2 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	290 mm 8x4 M4 shaft ship
1 x	300x4 mm M4 shaft ship
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	10 mm dogdrive props
1 x	10 mm portholes (10 pcs)
1 x	14 mm Portholes for screws (10 pcs)
3 x	29,0 mm propeller (rigth propeller)
2 x	33,0 mm propeller (left propeller)
1 x	Aeronaut Baumbeschlag (Ms) 10 mm
2 x	"S" set for boats
1 x	31,0 mm propeller (rigth propeller)
1 x	42,0 mm propeller (rigth propeller)
2 x	290 mm M4 7/8x212 mm shaft ship
1 x	33,0 mm propeller (rigth propeller)
1 x	39,0 mm propeller (rigth propeller)
1 x	38 mm fenders (10 pcs)
2 x	Wood anchor 30 mm (2 uds)
2 x	Anchor 25 mm (2 uds)
1 x	Railing L250 mm (10 pcs)
1 x	Joint for loading boom 2 pairs, 10 x 5 mm
1 x	Antenna 50 mm (2 uds)
1 x	Ancla metal 40 mm (2 uds)
2 x	75 mm
2 x	Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
2 x	Railing Ø 2mm (20 pcs)
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	Railing 5x100 mm
1 x	Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x	Ancla 40 x 24 mm (2 pcs)
1 x	Rigid coupling brass Ø 2 mm L: 15 mm
1 x	Ancla 16 mm (2 pcs)
2 x	Stick coupler Ms 15 mm
1 x	Liferaft 47 mm
2 x	MG cannon 1.8 cm (5 pcs)
1 x	CNC FPV Display screen&Transmitter Holder Vertical
2 x	Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x	Carbon plate 350x150x3.0 mm
1 x	18 mm wing servo holder
1 x	Electric spoiler 300 mm (2 pcs)
1 x	Astra (Top Model)
1 x	Compact on-board starting system (9525)
1 x	Gear for D 54
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Albatros ,spare cockpit (Top Model)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	RCEXL Electronic ignition twin A-02
1 x	Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x	Ignition bed V2 Red color
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	Spring clamp for tube Ø50 mm
1 x	Aluminium ignition bad (red)
1 x	Extension Arm for Carburetor
1 x	Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1 x	RCEXL Electronic ignition twin CM-6
1 x	DLE 30 complete electronic ignition
1 x	Electromotor starter EME 35cc
2 x	SkyMaxx 1.550 mm (kit)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	28x5 mm wires output (2 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	45 mm rods set for direction control
1 x	100 mm rods set for direction control
2 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Dingi Pl. 26 mm (5 pcs)
1 x	Ventilation grid 17x62 mm (5 uds)
1 x	Campana Ms 14 mm (5 pcs)
2 x	Compass Ø 15 mm (20 pcs)
1 x	Coupling for 6 mm axis
1 x	Capstan of plastic 88x30x36 mm
1 x	Davit Ms 35 mm (1 par)
1 x	Lancha salvavidas Kutter .Ösen 43 mm (5 pcs)
1 x	Klumpblock (Plastik), Höhe 8 mm, 2 Rille, 20 Stück
1 x	3 mm Leader (L 100 mm)
1 x	Feedthroughs 4 mm
1 x	4,8x1000 mm 2:1 blue termoretract tube
2 x	Ancla Hist. 67 mm (2 uds)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Propeller AERO-NAUT M4 50 mm (3 Blades pr) (Right hydropropeller
1 x	Propeller 4BL 60 mm M4 plastic Right
1 x	Farol Ms. 3v/10 mm
1 x	290x4 mm M4 shaft ship
1 x	Cleat 20 mm (2 pcs)
1 x	MAMBA 10 G2 PNP
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Fan metalic 21 mm
1 x	Coupling for 4 mm axis
1 x	Chain 1.5mm x 1m
1 x	Double BLOCK 5x10x5 mm (3 pcs)
1 x	Coupling for 3,2 mm axis
1 x	Double BLOCK 3x9x5 mm (3 pcs)
1 x	Cleat 10 mm (2 pcs)
1 x	Furling sail Ms.10mm (5pcs)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	2 mm male connector (2 pcs) with safety connector
1 x	36,0 mm propeller (rigth propeller)
1 x	Noray doble 9 mm (2 pcs)
1 x	Plastic fan 17x48 mm (2 pcs)
1 x	Mounting base Ms 12 mm
1 x	20 g tin paste
1 x	3,2x1000 mm 2:1 red termoretract tube

10,462.44EUR