Inicio » Catálogo » Robbe » ROBBIFPM2000A

1,380.00EUR

RV-8 ARF 70cc rojo/blanco/azul
[ROBBIFPM2000A]

The RV-8 70cc FLS (FeatherLite Series) is a 35% scale model of the famous experimental Van’s Aircraft RV-8. Designer and World Champion Quique Somenzini has taken a completely new approach with the design of the RV-8 70cc FLS. A massive airframe, with over 2000 square inches (130 sq. dm.) of wing area, that comes in at 23 pounds (10.4 kg) flying weight, offers such an incredibly lightly loaded airframe, it feels like you are flying something lighter than air. Couple the extremely light wing loading with key design and geometric details from the master himself, and you get an aircraft that has a incredible flight envelope.
Along with the incredible airframe design of the RV-8 70cc FLS, it is also designed to accept multiple power systems, including 60cc electric setups that allow you to fly anywhere from 5 to 8 minutes on a typical 12S Li-Po setup! We also can’t forget about its float-ready airframe either! The optional RV-8 70cc FLS Float Set includes everything needed to get it on the water, and is also available to match your RV-8 70cc FLS’ colorscheme.
This is an airplane that you need to truly experience for yourself, and once you have, you’ll quickly add one to your hangar! From its insane stability at walking speeds with the flaps down, to classic 3D and precision aerobatic maneuvers, the RV-8 70cc FLS has the flight performance and versatility that is for every pilot, of virtually every skill level.

FEATURES
Huge wing area (over 2000 sq. in. or 130 sq. dm.) with a scant 23 pound (10.4 kg) flying weight. Thats like flying a 120cc aerobatic model at nearly two-thirds the weight!
Designed by F3A and 3D World Champion, Quique Somenzini
Massive control surfaces with large deflections for the utmost in maneuverabililty
Removable tail, including the vertical fin, allows the easy transport of the RV-8 70cc FLS in more compact vehicles
Electric-ready airframe allows most 65cc or similar electric motors to be installed without modification
Painted Carbon fiber landing gear included
Large canopy hatch for easy access to internal components
Float-Ready airframe allows for easy installation of the optional RV-8 70cc FLS Float set
Lightweight foam cockpit floor and instrument panel are included
Pre-cut baffles for the DA-70 are included
2 vastly different colorschemes are sure to fit personalities of all types
Turnbuckle-style pushrods, ball links and turnbuckle wrench included
Accepts gas engines from 60-70cc, or equivalent electric motors, like the Desert Aircraft DA-70, or the Potenza 65cc Brushless Motor
Airframe easily accepts 2 to 1 canister installs
Easily removable wings for transport and storage
Factory-applied trim scheme

Specifications :
Wing-span (mm) : 2540
Flight weight approx. (g) : 10500-11300
Length (mm) : 2288
Control : H,S,Q,M
Manufacturer : Flex Innovation
Fuselage : Holz
Wings: Wood/rib construction
Version : ARF - ALMOST READY TO FLY
Rec. Battery : 12S/6200mAh LiPo
Recommend Motor : 60-70ccm / XPWR60CC or DUALSKY GA6000.9 55-60CC
Flight Skill : Professional
Building Skill : Advanced
Drive Type : Electric & Glow

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x	Banda lijado g. 180 para BSL 220/E (5 pcs)
2 x	Destornillador allen "Hex" Ø 2.0 molibdeno
2 x	Crimpadora
1 x	Destornillador Torx® TX6
2 x	Destornillador allen 1,5x50 mm molibdeno
2 x	Barra pegamento caliente Negro
1 x	Destornillador Allen 1.5 mm
3 x	Bascular < 40 Kg
1 x	Conector "T" 6-6-6 mm tubo bomba vacio
2 x	Destornillador allen 2,0x50 mm molibdeno
1 x	Alicate para "Ball-Link"
2 x	Barra pegamento caliente Rojo
2 x	Destornillador Allen 1.27 mm
2 x	Arrancador 12v (Max 180 and 30ccm)
2 x	Bomba de vacio 12 CFM completa
1 x	Arrancador EM Gear Power 250
1 x	Arrancador EM Gear Power 80
1 x	Bascula precisión 0.1- 600 g
1 x	Alicate para hacer "Z"
2 x	Destornillador allen 2,5x60 mm molibdeno
3 x	Bolsas inyectoras desechables (30x16cm) 100 pcs
2 x	Gafas Moritz
2 x	Gafas Aspen
2 x	Gafas Zurich Sport Sunglasse Dark Sensity BROWN
3 x	Gafas Stratus
1 x	Gafas Flitemaster
2 x	Gafas Nimbus
3 x	Gafas Zurich Sport Sunglasse Dark Sensity MAGENTA
1 x	Gafas Nimbus "Black"
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	Mochila OPALE paramodels
2 x	Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
2 x	Paramotor Trike XL
1 x	Vela OXY 0,5 pulgadas2
1 x	Base para servo
2 x	Alicate para "Ball-Link"
2 x	Bascula precision 0.1-2000 g
2 x	Ball link Aluminio M3 (2 pcs)
1 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	PIX Hawk con accesorios
1 x	Tubo Pitot para PIXHAWK
3 x	Modulo PPM Encoder
1 x	Rótula metálica M2/2 azul (2 pcs)
1 x	Catapulta Vasa model
3 x	Rótula con bola plana M3 (10 pcs)
1 x	Bungee HLG Premium
2 x	Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
1 x	Rótula INDUSTRIAL con bola M3 (2 uds)
1 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
1 x	Rotula 6 mm hexagonal con bola M3 (10 pcs)
2 x	Rótula corta M3 con bola/tornillo (6 uds)
1 x	Rótula con rodamiento M2,5 22x5,5
1 x	Rótula corta M1.6 con bola/base (6 uds)
2 x	Rótula M3
1 x	Rótula V2 corta M2 5Diam negra (2 pcs)
2 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Prolongador cable servo POWERBOX 50cm
1 x	Cristal de Receptor 35 Mc/s Ch 62
2 x	Goma arrancador Ø36 mm x 30 mm
1 x	Soporte lija 25 mm
2 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	Swing 1000
1 x	Plancha para entelar mini
1 x	Molde conector Sub-D
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
2 x	Tren retráctil neumático tripata (Jet Legend)
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Polo Hispano Aviación
1 x	Soporte Pitot JETI
1 x	Gafas Ace
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
2 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Soporte conector MPX enrasado (6 pcs)
2 x	Soporte conector MPX empotrado (6 pcs)
2 x	Rótula V3 aluminio M3/5 Diam con base corta (2 pcs)
2 x	Rótula V2 corta M2,5 5Diam negra (2 pcs)
1 x	Bancada aluminio servo (2 uds)
1 x	Aceite FUCHS Turbina (1 litro)
1 x	Autoarranque DLE 85/111/120 (motor incluido)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Anemometro Xplorer3
1 x	Alicate para hacer "Z"
1 x	Anclaje cabina de soporte horizontal "tipo F3A" (2 pcs)
1 x	Eje ruedas Ø 8 mm (2 uds)
1 x	Destornillador Torx® TX8
2 x	Corta tubos aire
2 x	Eje ruedas Ø 4 mm (2 uds)
1 x	Amortiguador FEMA 400 Newtons
1 x	Amortiguador FEMA 100 Newtons
2 x	Termo-retráctil verde tubo de 12,7x1000 mm 2:1
1 x	Termo-retráctil rojo tubo de 6,4x1000 mm 2:1
1 x	Ball link aluminio M3 V1 azul (10 pcs)
2 x	Termo-retráctil verde tubo de 6,4x1000 mm 2:1
2 x	Termo-retráctil rojo tubo de 4,8x1000 mm 2:1
1 x	Termo-retráctil verde tubo de 2,4x1000 mm 2:1
2 x	Rótula con bola M2,5 (10 pcs)
1 x	Rótula V1 corta M2/M1,6 3Diam negra (6 pcs)
1 x	Rótula larga M2 con bola/tornillo (6 uds)
1 x	Rótula M3
1 x	Rótula metálica M3/3 azul (2 pcs)
1 x	Rótula con rodamiento M2 22x5,5
1 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
1 x	Rótula M1.6 con tornillo y tuerca (6 uds)
1 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
1 x	Molde conector MPX 8 pines
1 x	Termo-retráctil negro tubo de 12,7 mm 2:1
1 x	Helice FIALA 23x8 Electric
1 x	Fuente alimentacion NT 25 Amp.
1 x	Termo-retráctil azul tubo de 6,4x1000 mm 2:1
1 x	Medidor de ángulos digital para helicóptero
1 x	Herramienta para desmontar kwik link
2 x	Herramienta enrollador alambre (Kwik Twist Tool DU301)
1 x	Combo FOXY C3530-700 + FOXY 80 amp
1 x	Programador 5v SIO RS 232
1 x	Punta recambio soldador KAVAN 668838
3 x	Medidor digital de peso, equilibrio y angulos BASIC
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Cono Aluminio hélice fija 40 mm diámetro / eje 3,2 mm
1 x	Molde conector Dean-T
1 x	Cono NUT M6
2 x	Molde conector XT-60
1 x	Tijera Aramid 21 cm/8" PROTON
1 x	Tacometro HANGAR 9 digital
1 x	Cono NUT M4
2 x	Pincel laminar 10 mm (50 pcs)
1 x	Fuente alimentacion NT 40 Amp.
1 x	Adaptador 3 LiPos XH>EH
1 x	Termo-retráctil rojo tubo de 1,6x1000 mm 2:1
1 x	Termo-retráctil negro tubo de 6,4x1000 mm 2:1
1 x	Disco Corte Proxxon/Dremmel 22 mm
1 x	PVC termo-retráctil batería 165 mm transparente (1 m)
1 x	Destornillador allen 3,0x60 mm molibdeno
1 x	PVC termo-retráctil batería 58 mm transparente (1 m)
1 x	Fuente Alimentación HITEC 30A Max.540w
1 x	Adaptador 2 LiPos XH>EH
1 x	Helice FIALA 19x12 Electric
1 x	Pasta para estaño 20 g
1 x	PVC termo-retráctil batería 165 mm transparente (10 m)
1 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Termo-retráctil negro tubo de 4,8x1000 mm 2:1
1 x	PVC termo-retráctil batería 37 mm transparente (1 m)
1 x	Cable BEC 30 cm (macho)
1 x	Termo-retráctil rojo tubo de 3,2x1000 mm 2:1
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Fuente Alimentacion eFuel 30A
1 x	Guante Latex GRIP Talla L
1 x	PHASOR RACE 2035/4100 1D
1 x	Lima redonda PERMAGRIT 18 mm para Dremel
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Fresa corte diamante Ø 2.3mm (bola)
2 x	Programador HPP-21 PLUS HITEC digital servos PC
1 x	Lima fina PERMAGRIT para Dremel
2 x	Dremel 3000 130W
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Medidor ángulo palas helicóptero
1 x	PHASOR RACE 2035/2100 2D
1 x	Tijeras curvas 16cm - GFK/CFK/Aramid
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	Acumulador polvo para limpieza moldes
1 x	Lija cóncava-convexa con papel de 13 mm
1 x	FOXY G2 C3530-700
1 x	Barra pegamento caliente Verde
1 x	Servo Controller Fibra optica
1 x	SERVO DES 588 BB MG
1 x	Mini-clip
1 x	Plancha entelar Profi LCD
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Plancha para entelar
2 x	Soporte Filtro FESTO
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Disipador motor tipo 400
1 x	Soporte FUEL DOT V3
1 x	Molde conector XT-90
1 x	Soporte Angular conector XT-60 (2 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Soporte conector MPX (6 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Soporte ECU Xicoy X-45
1 x	Disipador motor tipo 300
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	EDGE 540-A 74" (1880 mm)
1 x	Sensor RPM Optico para Dinamometro
1 x	Set montaje amortiguador para modelos 5-10 kg
1 x	Extension carga 50 cm para 2 Baterias
1 x	PowerBox Mobile Terminal
1 x	PowerBox Battery 4000
1 x	MicroMatch PowerBox
1 x	PowerBox iGyro SRS + GPS Modul
1 x	PowerBox DigiSwitch V2 JR/JR
2 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
1 x	Catalizador RESOLTECH 3357-T (0.45 Kg) Apto para adhesivo 3350/1
1 x	Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x	Cable video GoPro con cable 5V
1 x	SCANNER 46-55 Sport Scale 1:7 ARF
1 x	BULLIT 60 Ala 1095 mm
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	Conector banana oro 6,0 mm
1 x	Eje ruedas Ø 6 mm (2 uds)
1 x	Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
1 x	Camara USB micro endoscopica
1 x	Cono 102 mm Cromo
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x	Bisagra de compuerta aluminio (1 pcs)
1 x	Cable conexión RX
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x	Bisagra de nylon 15x0,3 (10 pcs)
1 x	Eje ruedas 4x21 mm (2 uds)
1 x	Conector MR30 (macho)
1 x	Brazo aluminio ext. carburador
1 x	Eje rueda 4x16 mm (2 uds)
1 x	Cono 125 mm Fibra GFK
1 x	Cono 64 mm aluminio
1 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x	Cable "Y" 15 cm
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Lija PERMAGRIT 45° 140x51 mm

17,551.02EUR