350.00EUR

Vacuum pump P1-N
[R3901002]

Vacuum pump P1-N

Product is manufactured in Germany, two year warranty

Diaphragm vacuum pump and compressor. With integrated fine adjustment valve and pressure-vacuum gauge.

High performance and excellent durability by means of a stress-optimised structural diaphragm
Unadulterated evacuation, delivery and compression of air
High -performance despite the most compact dimensions
Very quiet and vibration-free
Good compatibility with steam and condensation
Coolrunning motor, even when in continuous operation (> 8000 h)
With thermal switch and mains fuse
Simple to operate, maintenance-free

Applications:
For excellent evacuation, delivery and compression of air. Also particularly well suited for vacuum compression processes used in the manufacturing of fibre composite components. High final vacuum, for moulds of approx. 3–5 m² surface area.

Technical data:
Max. permitted gas and ambient temperature: from + 5 to + 40 °C
Motor: 220 V/50 Hz
Protection type: IP 20
Motor output: 65 W
Current consumption: 0.63 A
Weight: 1.9 kg
Integrated connection for R&G pump hose Ø 6 mm (order no. 390 110-X)
Noise level 58 dB(A)
Performance ranges:
Max. capacity at atm. pressure 6 litre/min
Max. vacuum - 0.85 bar (compressive force = 8500 kg/m²)
Max. operating pressure 2.4 bar

More information
If the vacuum pumps used in a place where the air is not free of dust, so for example in a working space, where workpieces processed e.g. by grinding, we recommend to equip the vacuum with a particulate filter (R&G Vacuum filter/Universal filter 390 105-1/390 108-1). Otherwise there is a risk of dust or fine chips lodge themselves between the membranes in the vacuum pump and thereby the suction is greatly reduced. In such cases, the pump has to be returned to the manufacturer for repair. Often then, new membranes are installed.

under request

Reviews

Quick Find

Shopping Cart

1 x	Conector XT-30 (macho)
1 x	M3 Maxi ball link (2 uds)
1 x	Horn 5/10 with M2 Bearing
3 x	Squared carbon wing joinner 5x5x220 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Round Rod 1,25x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Conector male bateria 1s Kavan/Walkera 10cm cable
3 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Long ball link M1.6 (6 uds)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	TX 250 mW especial GOPRO
2 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	Cable video GoPro
1 x	Cable video GoPro and 5V cable
1 x	Propeller diller for DLE111 and DA85-150
1 x	Propeller diller for DLE170
1 x	Propadapter for motor A60-V2
1 x	MAX pilot ARTF
1 x	Premium servo extension 100cm
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	Conector JR Servo male (50 pcs)
2 x	Strip ABS 2.0x3.0x1000 mm
1 x	Horn with ball 55x40
1 x	SE Ring 200 mm (2 pcs)
1 x	Starter 12v (Max 90 and 15ccm)
3 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Partall paste 650 g
3 x	Carbon fiber rod 20 mmx1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Glases Ace
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Extension silicon 35 cm male (Futaba)
1 x	LH long black aluminium horn L31xH30 (2pcs)
3 x	Bungee HLG Premium
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	Socket head long ball link M3 (6 uds)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Connectors banna oro 2 mm (M/F)
1 x	Baseplate servo
1 x	Allen wheel collar M4x6
1 x	Z Bender - S Type Tool
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Circlick securite
1 x	Clip fixing for wing (2 pcs)
1 x	Hot Glue Stick RED
2 x	ABS Strip 1.0x5.0x1000 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	AC-10 pre-rotacion with motor
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Pilot "Goose" (Slimline)
1 x	12.7 mm 2:1 black termoretract tube
2 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Extension 30 cm (Futaba)
2 x	Propeller diller for EME35 and DLE35
1 x	Blocking screws M6 gas engine
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Oracover White 2 m
1 x	100 mm rods set for direction control
1 x	Extension silicon 50 cm (Futaba)
1 x	Ply-Span 450x600/13g Blue
1 x	Clip mini fixing for wing (2 pcs)
1 x	1/12 Pilot "Tom"
1 x	Oratex Silver 2m
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Ply-Span 450x600/13g Yellow
1 x	Lead with adhesive (2 pcs)
1 x	Split pin 1x8 mm (10 uds)
1 x	1/6 Pilot "Garry"
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Xplorer2 anemometro
1 x	Extension silicon 30 cm male (Graupner)
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Vasa model Catapult
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
2 x	Cap Hispano Aviación
1 x	Softshell Hispano Aviación
2 x	Shirt Hispano Aviación
1 x	Turbina KINGTECH K70G4
1 x	Battery LiFe -2100/25C-3S 9.9V
1 x	1/12 Pilot "Langley"
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Extension silicon 100 cm (Futaba)
1 x	Propeller G-Sonic 20x8
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Futaba male 40 cm extension
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Extension silicon 75 cm (Graupner)
1 x	Oracover CARBON Metalic 1 m
1 x	90 mm rods + T patellas set for direction control
2 x	TYGON tubo 15 m Diam. 3.4 x 2.0 mm
2 x	Blue "FUEL VENT" round aluminum overflow socket
1 x	Digital Air Speed Sensor And Pitot Tube Set
2 x	Glases Moritz
2 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	PPM Encoder Module
1 x	USB Adaptor OPTronics
1 x	Rudder forward 70x28 "type Kato"
1 x	Black "FUEL VENT" round aluminum overflow socket
1 x	USB Mini Camera endoscope
1 x	Glases Stratus
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Propadapter for motor A50
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Control for forward wheel (MINI)
1 x	Extension 7.5 cm
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Extension silicon 30 cm male (Futaba)
1 x	45 mm rods set for direction control
1 x	Oratex White 2m
1 x	ORACOVER transparent Yellow (10 m)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Oracover CHROME 2m
1 x	Extension silicon 25 cm (Graupner)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Window mounting channel 5m
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Xplorer1 anemometro
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Tube Pitot to PIXHAWK
1 x	Small control horn with bearing (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	PIX Hawk with accesories
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Glases Nimbus
1 x	Cabel "Y" 15 cm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	DUPLEX 2.4EX Central Box 220
1 x	RH long aluminium horn (2pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Tube support Ø 6mm (10 pcs)
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Carbon blade 3D 230 mm
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	SlowFlyer control horn (3 pcs)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	UHU Por 50ml/40g
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Tubo Teflon Ø25 mm x 10cm
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	Small aluminium horn blue (2pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Carbon fiber rod 12 mm x 1000 mm

6,769.12EUR