21.00EUR

Partall paste 650 g
[R1651601]

Characteristics:
- For Epoxy-, polyester- und vinylester resins.
- Silicone-free.
- Useable up to 60 °C.

A blend of hydrocarbon and microcrystalline waxes. For high-gloss surfaces. Ideal for smooth and sealed surfaces e.g. on GRP moulds.

Polishing possible after a drying time of approx. 1-2 minutes.

Could be used in conjunction with film release agent PVA.

Available in green and colourless.

It is particularly recommended for use on moulds where standard silicone waxes hinder post-finishing operations or as a primer coat prior to the application of PARTALL® Coverall Film. PARTALL® Paste #2 may also be employed as an economical edge wax on larger molds, and is used to seal rough wood moulds or plugs for casting composites, cements and grouts.

The maximum processing temperature is 60 °C.

Mould surface preparation
Before application of PARTALL® Paste #2 porous molds (i.e., plaster or wood) should first be cleaned and sealed. Composites grade sealers and fairing compounds (body filler) are recommended but a good surface on plaster or wood may be obtained with automobile type primer-sealers and lacquers. For non-cosmetic parts with rough wood molds or plugs a number of coats of PARTALL® Paste #2 should adequately seal the surface.

Application
Using a clean and dry cotton cloth, apply a small amount of Partall® Paste #2 to mould surface in a thin even coat. 0.5 - 1.0 g is enough for about one square yard (1m²). Turn over cloth and begin buffing immediately by hand (within one minute after application). On larger moulds or plugs work on smaller sections at a time or have second operator follow to polish. Power buffer equipped with a terry cloth or lamb’s wool pad will reduce labor time on larger moulds. Surface should be buffed to a glossy finish. Complete surface coverage is more important than a thick film of wax. In order to ensure complete coverage, repeat application and polishing process at least 3 times for initializing new or reconditioned moulds or plugs. Alternate direction of application of each coatimportant (i.e., 0°, 90°, circular, etc.). Polish each coat before applying the next.

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	1000 ml sealer (DOPE)
2 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Partall paste 650 g
1 x	Plasti Dip Liquid Tape 429 ml orange
2 x	Spray Graphit 33
1 x	Spray adhesive AEROFIX 2
1 x	Paint gun for sprays
3 x	Solvent Plasti Dip 1000 ml
3 x	Universal Colour Paste white 50 g
1 x	20 g tin paste
3 x	Spannlack 1000 ml
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Presto SF Light Filler styrene-free (420 g)
2 x	Nitroverdu 500 ml
2 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Xplorer4 anemometro
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Xplorer1 anemometro
2 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Xplorer2 anemometro
3 x	Straightened threaded rod M2-1m
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
2 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Xplorer3 anemometro
3 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
2 x	Round Rod 1,0x1000 mm
2 x	ABS I Strip 10x5x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	ABS Strip 1.0x2.0x1000 mm
2 x	Round Rod 1,5x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
3 x	Round Rod 3,0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Painting GHT Lexan Black 150 ml
1 x	Universal Colour Paste deep black 50 g
1 x	Release wax 250ml
1 x
1 x	Spray adhesive INFUTAC (Clear) 500 ml
2 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Oratex Silver 2m
1 x	Ply-Span 450x600/13g Orange
2 x	ORACOVER transparent Yellow (10 m)
1 x	Oracover Brown 2 m
1 x	Monokote PLATINO metalizado (1.8x0.65m)
2 x	Ply-Span 450x600/13g Blue
1 x	Ply-Span 450x600/13g Yellow
1 x	Oracover Orange 2 m
1 x	Oracover Yellow CUB 2 m
1 x	Oracover Black 2 m
1 x	Oracover Verde 2 m
1 x	Oracover White 10 m
1 x	Ply-Span 450x600/13g White
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
2 x	Oratex Yellow Cub 10 m
1 x	Oratex Antik 2m
1 x	Oracover Yellow CUB 10 m
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Motor DLE 430 cc - Paramotors
1 x	Tow hook for tug
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	4 mm Prop Adapter CN-Spinner
1 x	4 mm Prop Adapter M8
1 x	SCHARNHORST accessories
3 x	Suncover 100cc Red
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	110x55 mm SLH KOVO wheel
1 x	102 mm INO spinner (carbon imitation)
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	1/10 Pilot "Jack"
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	120x60 mm SLH KOVO wheel
1 x	170x54 mm SLH KOVO wheel with bearing and metal hub
1 x	1/4 Pilot "Mike"
1 x	1/12 Pilot "Langley"
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
2 x	Hobbylite Filler, Balsa colour
1 x	280 cc gasoline fuel tank complet
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Spray EC Red 400ml
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Fuselage Bags JEEMO
1 x	ABS I Strip 20x10x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	Profile ABS half cane 6.0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Universal Colour Paste deep black 250 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Round Rod 6,0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	IMPULSE 2 F3F
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	Strip 3,5x1,75x330 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Oracover CARBON Metalic 1 m
1 x	Oracover Azul Cielo 2 m
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	36,0 mm propeller (rigth propeller)
1 x	5 mm Prop Adapter M8
1 x	45 mm white plastic spinner for fixed propeller
1 x	42,0 mm propeller (left propeller)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	CAM-Carbon Light Prop 13x6" (Prop left)
1 x	Capstan of plastic 91x44x45 mm
1 x	Motor holder AXI
1 x	39,0 mm propeller (rigth propeller)
1 x	45 mm black plastic spinner for fixed propeller
1 x	50 mm white plastic spinner for folding propeller
1 x	39,0 mm propeller (left propeller)
1 x	Cancamo Ms 7 mm (50 pcs)
1 x	Cannon 12.7 cm (2 pcs)
1 x	CAM-Carbon Light Prop 9x6"
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Cannon 53/6 mm
1 x	CAM-Carbon Light Prop 8x4.5" (Prop left)
1 x	CAM-Carbon Light Prop 9x5" PHANTOM (Prop right)
1 x	CAM-Carbon Light Prop 13x5" Q500
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	CAM-Carbon Light Prop 9x5" (Prop left)
1 x	Cancamo con aro 16/6.5 mm (10 pcs)
1 x	Canopy F9F Panther (Aero-naut)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	CAM-Carbon Light Prop 13x5" Q500 (Prop left)
1 x	CAM-Carbon Light Prop 9x5" (Prop right)
1 x	Catalog AERO-NAUT 2016
1 x	CAM-Carbon Light Prop 12x6"
1 x	Canadair CL-415 (aero-naut)
1 x	CAM-Carbon Light Prop 13x6" (Prop right)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	FOXY G2 C3530-700
1 x	AXI Cooler 22xx
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	Male connector for 10 pines AWG
1 x	Female connector for 12 pines AWG
1 x	Cooler motor type 400
1 x	PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x	Servo M2x9/16 screw (4 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support FUEL DOT V3

13,787.45EUR