1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
2 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Round Rod 2,0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
3 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
2 x | Round Rod 1,5x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Round Rod 4,0x1000 mm |
2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | Strip 1,5x1,5x330 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Micro flex hinge (12 uds) |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Miniature brass strap hinge, 1 m |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Small pinned hinge (12 uds) |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | One touch canopy lock |
3 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Electric spoiler 250 mm (2 pcs) |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Covered closure or fairings |
1 x | 1000 ml sealer (DOPE) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Ventus 1:4 set of instruments |
1 x | Propeller balancer |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | CC 03 |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Air pressure gauge |
1 x | Y-Hose connector 6-6-6 mm |
2 x | Angled clevis with threaded rod M3 |
1 x | Quick hose connector 4-4 mm |
1 x | Fail Safe air retract |
2 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Xplorer4 anemometro |
1 x | SCHARNHORST accessories |
1 x | La Capitania di Venetia 1:50 |
1 x | Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS |
1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
1 x | LO 100 ARC 3.3m,cabina |
1 x | Fournier RF-4D |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Glider STROLCH |
1 x | PowerBox PIONEER incl. microSwitch |
1 x | PowerBox Champion SRS |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | BlueCom™ Adapter (iOS) |
1 x | SPARK Switch 5.9v |
1 x | Power Box GPS Sensor III |
1 x | PowerBox iGyro SAT |
1 x | External LED's (2 pcs) |
1 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | Battlife Guard 2s |
1 x | E-FUN BUG (ROI-Import) |
1 x | Glider KNIRPS |
1 x | XICOY X45 rail |
1 x | Glidder Mü13e (Bergfalke) |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
1 x | PowerBox iGyro 3xtra |
1 x | PowerBox 12 |
1 x | Wings Bags JEEMO |
1 x | Fiberglass plate 350x150x4.0 mm |
2 x | Round Rod 1,25x1000 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
2 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Strip 2,5x1,25x330 mm |
1 x | Foam plastic plates (310x210x5 mm) |
2 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
2 x | Tachometer HANGAR 9 digital |
1 x | 25 mm Sandpaper file |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
2 x | Styrene plate 320x120x1.0 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
2 x | Round Rod 6,0x1000 mm |
2 x | Fiberglass plate 350x150x1.0 mm |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Round Rod 1,0x1000 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | GPS Logger Dymond |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Small flex hinge (12 uds) |
1 x | Small pinned hinge (6 uds) |
1 x | Gates hinge |
2 x | Steering arm 16 mm Ø 4 mm |
2 x | Control for forward wheel (MINI) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Snap pin for micro clevis (10 uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | Round flex hinge (12 uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
3 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Wheel FEMA 165 mm / 8 mm |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Dual Sequencer Gear and Canopy |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Starter 12v (Max 180 and 30ccm) |
2 x | Z Bender - S Type Tool |
1 x | Baseplate servo |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | Xplorer2 anemometro |
1 x | Spinner 90 mm GFK |
1 x | Spinner 105 mm CFK |
1 x | Spinner 125 mm GFK |
1 x | Spinner 159x200 mm GFK |
2 x | Landing gear axle Ø 6 mm (2 uds) |
2 x | 400 Newtons FEMA absorber |
1 x | 300 Newtons FEMA absorber |
2 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Gearwheel 9724/09 for ZG 45 |
1 x | Wheel FEMA 178 mm / 8 mm |
2 x | Wheel FEMA 152 mm / 8 mm |
2 x | Servo holder for retract |
2 x | L-shaped servo mount |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Racor 4/6 mm |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Racor 2/3 mm |
1 x | Nylon threaded block M4 (2 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Digital precision scale up to 2000 g |
1 x | Hot Glue Stick GREEN |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Dust collector for mould cleaning |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Hot Glue Stick BLACK |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Cyano INSTA - FLEX+™ (25g) |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Ball Link Plier |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Aluminium servo arm (2 uds) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Spinner 100 mm GFK |
1 x | 90 mm CFK long Spinner fixed by a central screw |
1 x | Fod Guard 94x34 mm |
1 x | Avanti S Jet , Exhaust for JetCat P-140 (SebArt) |
1 x | Variable Flow Smoke Pump System |
1 x | Avanti S, Cockpit sunCover (SebART) |
1 x | Avanti XS Jet , Fuselage Stand (SebArt) |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | Turbina KINGTECH K180 G4+ |
1 x | Spinner NUT M10x1 |
1 x | KingTech Turbineoil 1L |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | SAGITA Alsema 4.0 m |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Ventus 2cx 4.5 m Cabling wings |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser |
1 x | Avanti XS Jet , Carrying bags (SebArt) |
1 x | SunCover 2.2 Class (SebART) |
1 x | Fod Guard 83x32 mm |
1 x | Wings carryng bags 30 class (SebART) |
1 x | Avanti S 2.3m Jet WHITE/BLUE & retract (SebArt) |
1 x | Class 30, Red wheel pants (SebART) |
1 x | Fod Guard 73x32 mm |
1 x | Fundas para el transporte F3A alas |
1 x | CESSNA 50E White/Blue |
1 x | Ventus 2cx 4.5 m Winglets |
1 x | LUNAK 4,00 m |
1 x | PowerBox PowerExpander SRS |
1 x | PowerBUS Lead 200 cm |
1 x | USB Interface Adapter |
1 x | PowerBox SOURCE |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | Jeemo Dolly |
1 x | SensorSwitch, red connector wit 200cm ribbon cable |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Steel brush wheel with 2.35mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Sealing Iron Sleeve PROF |
1 x | Universal batery Tester |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | LO 100 ARC 3.3m |
1 x | 25 mm reinforced hinge |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
3 x | Locking cable tie 2.5x100 (uds) |
1 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Turbina KINGTECH K142 G4M |
1 x | Bidule 55 V3 2460 mm |
1 x | 11 mm wing servo holder |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | SAGITA Alsema 3.0 m |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | KingTech T-Modul 5 in 1 Telemetry |
1 x | Avia (Top Model) |
1 x | Glider IKARUS |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | POWERBOX Magic Jeti Switch |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | Extender tip (6 pcs) |
1 x | Vacuum pump P1-N |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | ABS I Strip 20x10x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Aramid 50 daN 50 m |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | LUCAS pilot ARTF |
1 x | Opale Rucksack |
1 x | Ballast 700gr OPALE |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Paramotor BackPack XXS 2 |
1 x | Paramotor Trike XL |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Release film 100 cm x 50 m |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | LS-8 GFK 6m Glider |
2 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | ANGEL 48" pp orange/black/white |
1 x | ANGEL 48" pp red/blue/white |
1 x | Brake for 140 mm wheels |
1 x | Mudguard wheels 112/127 mm |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | 1/10 Pilot "Jack" |
1 x | 18m Fitting barb |
2 x | Canopy Latch |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. trasero |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Allen wheel collar M3x5 |
1 x | Landing gear frontal support 25x32x16 |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Tailwheel for 1-3 kg models |
1 x | Tailwheel for F3A size |
1 x | Battery charging cable XT60 |
1 x | Compact on-board starting system (9715) |
1 x | 150 Newtons FEMA absorber |
1 x | Compact on-board starting system (9724) |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | ExtraCA Top |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Spinner 115 mm GFK |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | 70 mm aluminium spinner. |
1 x | 100x50 mm SLH KOVO wheel |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Snap long M2 (10 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Lead with adhesive (2 pcs) |
1 x | Cockpit plastic closing |
1 x | Snap for floding prop for 2 mm axi |
1 x | Snap short M2 (10 uds) |
1 x | Allen wheel collar M4x6 |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Tailwheel for 60/120 size |
1 x | Tail wheel for 8-12 kg models |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | 28 mm tailwheel unit |
1 x | Tailwheel for 40/90 size |
1 x | Tren de cola carbono 50-70cc |
1 x | Wheel cover holder Ø 5 mm (2 uds) |
1 x | 20-25mm Servo Arm |
1 x | Charger ISDT 608AC 200W |
1 x | Tail wheel for 5-8 kg models |
1 x | Ball Bearing Oil 25 ml |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Compact on-board starting system (9713) |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Metal ring front FEMA |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | 200 Newtons FEMA absorber |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Compact on-board starting system (9512) |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Compact on-board starting system (9525) |
1 x | Restrictor FESTO 3/3 mm |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Z-shaped servo mount |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Mudguard for 140/165 mm wheels |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | 1/12 Pilot "Tom" |
1 x | 1/6 Pilot "John" |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | 1/4 Pilot "Heidi" |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | 38 mm aluminium spinner. |
1 x | Spinner 90 mm CFK |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | 1/7 Pilot "Japanese" |
|
43,054.64EUR |