130.00EUR

Gafas FPV Eachine EV800D
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP
A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


pocas unidades
pocas unidades

Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Gancho de remolque hasta 3m
1 x Liston ABS 2.0x8.0x1000 mm
1 x Extractor piñones 2.3/3.2 mm
1 x Bateria arranque incl. compresor inflado
1 x Servo NARO Max Std
1 x Conjunto bieleta 45 mm para dirección
2 x Bisagra larga con pin metalico (12 uds)
2 x Bisagra pin 26x11 mm (10 uds)
1 x Prisionero aluminio 4 mm Ø (4 uds)
1 x Mini Clips para fijar Ala (2 pcs)
1 x Prisionero allen M4x4
1 x Bisagra de Flaps (6 uds)
2 x Bisagra papel CA (12 uds)
1 x Bisagra papel lite CA (12 uds)
2 x Bisagra PIN mediana (12 uds)
1 x Pasacable de goma Ø 3.2 mm (4 uds)
2 x Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x Prisionero aluminio 3 mm Ø (4 uds)
2 x Bisagra de compuerta aluminio (1 pcs)
1 x Pasacable de goma Ø 4 mm (4 uds)
2 x Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x Frenos Cuchillo 250 mm / 16 mm
1 x Cierre cabina tipo FOX MDM1 4m (1 par)
2 x Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x Bisagra de nylon flaps 33x9 (2 pcs)
1 x Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x Cierre cabina
1 x Salida para cables 38x4,5 mm (2 pcs)
1 x Soporte abrazaderas 4.3 (4 uds)
1 x Conjunto bieleta 100 mm para dirección
2 x Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x Gafas Flitemaster
1 x Listón de HAYA redondo 3,0 x 1000 mm
1 x Liston de BALSA 10 x 10 x 1000 mm
1 x Listón OBECHI 2,0x3,0x1000 mm
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Cartucho de humo Azul 140 g
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x Soporte filtro FESTO (4 pcs)
1 x Centralita de control OPTOTRONIX Aurora-LCU
1 x Piloto 1/12 "Fighter"
1 x Soporte grifo FESTO (2 pcs)
1 x Soporte Filtro FESTO
1 x Interruptor magnetico (PCB) DPSI
1 x Cable USB CORTEX DEMON Bavarian
1 x Soporte Angular conector XT-60 (2 pcs)
1 x Piloto 1/6 "John"
1 x DUPLEX 2.4EX Central Box 210
1 x DUPLEX 2.4EX Central Box 220
2 x Cierre/Anclaje Ala M3 Rojo (2 pcs)
1 x Transmision funda/varilla greyline plastica 3/2 porta kwik link
1 x Pin largo M2 (10 uds)
1 x Bisagra de nylon 20x20x0,3 (10 pcs)
2 x Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x Abrazadera 3.2x142 (20 uds)
1 x Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x Cable acero trenzado Ø 0,5 mm (2 m)
1 x Brazo direccional 16 mm Ø 3 mm ( 2 uds)
1 x Bisagra de aluminio desmontada 6x98 mm (2 pcs)
1 x Transmision funda/varilla octog. plastica 3/2
2 x Protector punta ala 30x10 (2 pcs)
2 x Bisagra Micro flexible (12 uds)
1 x Liston ABS 1,0x5,0x1000 mm
1 x Liston ABS 1,0x3,0x1000 mm
1 x Varilla ABS 2,0x1000 mm
1 x Liston ABS I 2,5x1,25x330 mm
1 x Varilla ABS 6,0x1000 mm
1 x Liston ABS H 1,5x1,5x330 mm
1 x Varilla ABS 1,5x1000 mm
1 x Liston ABS I 10x5x1000 mm
1 x Lancha Pilot
1 x Pin corto M2 (10 uds)
1 x Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
2 x Bisagra correa de latón en miniatura 1m
1 x Bisagra de nylon 15x0,3 (10 pcs)
1 x Soporte frontal tren de aterrizaje 29x26x13,5
1 x Cierre cabina "One touch"
1 x Prisionero 5 mm Ø (4 uds)
1 x Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
1 x Pasador M1,2x10 (10 pcs)
1 x Prisionero 3.5 mm Ø (4 uds)
1 x Transmision funda/varilla octog. plastica 4/3 porta kwik link M3
1 x Pasador 1x8 mm (10 uds)
1 x Transmision funda/varilla greyline plastica 3/2 kwik link M3 100
1 x Pin para hélice plegable para eje 2 mm
1 x Prisionero 4 mm Ø (4 uds)
2 x Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW thread
1 x Combo 4 pcs AXI 2204 Multicopter
1 x Motor 1804 2400KV Qav 250 mini
1 x Plancha carbono 350x150x1.5 mm
1 x Tubo carbono (L 1000 mm, Ø6 mm, Ø4 mm)
1 x Cargador ISDT 608AC 200W
1 x Tubo carbono (L 1000 mm, Ø4 mm, Ø3 mm)
1 x Cono F3A 82 mm eje 12 mm perforado
1 x Cono INO 82 mm Chrome (Imitacion metal)
1 x Cono INO de 102 mm (Imitacion carbono)
1 x Cono aluminio autoventilado helice pleg. 30 mm dia./eje 5.0 mm
1 x Carburador Moki S400
1 x Tubo carbono 3K-PW (Ø22 mm, Ø20 mm L:1000 mm)
1 x Plancha carbono 500x400x2.0 mm ISOTECH
1 x Conector banana oro 2 mm
1 x Carburador Moki S 180
1 x PowerBox OLED display
1 x Cono Aluminio hélice fija 45 mm diámetro / eje 6,0 mm
1 x Cono CFK-BS 104x131 mm 115 g
1 x Cono aluminio autoventilado helice pleg. 34 mm dia./eje 3 mm
1 x Cono INO de 89mm (Imitacion carbono)
1 x Cono F3A 82 mm eje 12 mm perforado 3BL
2 x Cono INO de 63 mm (Imitacion carbono)
1 x Cono INO de 57 mm (Imitacion carbono)
1 x Cono INO 70 mm Chrome (Imitacion metal)
1 x Cono blanco autoventilado hélice pleg. 30 mm diam. / eje 4 mm /
1 x Cono INOVA 102 mm negro
1 x Cono INO de 51 mm (Imitacion carbono)
1 x Cono aluminio autoventilado hélice pleg. 38 mm dia./eje 5 mm
1 x Cono INO 51 mm Chrome (Imitacion metal)
1 x Cono Alumin. hélice pleg. 30 mm diámetro / eje 4,0 mm
1 x Cono INO de 82 mm (Imitacion carbono)
1 x Cono Aluminio hélice fija 45 mm diámetro / eje 4,0 mm
1 x Cono Alumin. hélice pleg. 30 mm diámetro / eje 5,0 mm
1 x Cono INO 75 mm Chrome (Imitacion metal)
1 x Cono Aluminio hélice fija 50 mm diámetro / eje 6,0 mm
1 x Cono aluminio autoventilado helice pleg. 30 mm dia./eje 3.17 mm
1 x Cono INO de 70 mm (Imitacion carbono)
1 x Cono Aluminio hélice fija 50 mm diámetro / eje 5,0 mm
1 x Cono carbono para F3A 75 mm para Hacker C-50
1 x Cono carbono para F3A 95 mm
1 x Cono INOVA 63 mm blanco
1 x Cono Aluminio hélice fija 45 mm diámetro / eje 3,2 mm
1 x Hélice plegable CAM-Carbon 14x6
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x PowerBox iGyro SRS + GPS Modul
1 x PowerBox Competition
1 x PowerBox PIONEER incl. microSwitch
1 x PowerBox DigiSwitch V2 JR/JR
1 x Extension 30cm SensorSwitch
1 x Extension 50cm Dispaly Royal/Champion SRS
1 x Clip de seguridad MPX (6 pcs)
1 x Varilla ABS 3,0x1000 mm
1 x Bisagra Larga flexible (12 uds)
1 x Gafas Nimbus "Black"
1 x Boomerang SPRINT V2 Red/Yellow
1 x RANGER Jet CANADA 1.854 mm combo
1 x Bisagra de Flaps 33x9 mm (6 uds)
1 x Bisagra de nylon 20x15x0,3 (10 pcs)
1 x Varilla mando doble roscada duraluminio M3 90 mm (2 pcs)
1 x RANGER Jet Red/Yellow 1.854 mm combo
1 x TURBINATOR 2 Rojo/Blanco 1.778 mm Combo
1 x VIPER JET 2.2m + Electric. Landing Gear Deco: 01 Red-Blac-kWhit
1 x TURBINATOR 2 Azul/Amarillo 1.778 mm Combo
1 x Horn corto de latón M4 para cable (4 pcs)
1 x Prisionero 3 mm Ø (4 uds)
1 x Cierre/Anclaje Ala M3 Azul (2 pcs)
1 x Brazo direccional 12 mm Ø 4 mm ( 2 uds)
1 x Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
2 x T-Motor MN705-S Kv125 (pack 2 uds)
2 x Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thread
1 x Cono 70 mm aluminio
1 x Rueda KOVO espuma 45x9 mm radios especial ligera (2 pcs)
1 x Rueda KOVO espuma dura 35x14 mm (2 pcs)
1 x Liston de BALSA 6,0x6,0x1000 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Cono 38 mm aluminio
1 x Cono 64 mm aluminio
1 x Copiador 2 unidades de 20 cm
1 x Copiador 5 unidades de 20 cm
1 x Cristal Universal RX 35.150 Ch 75
1 x Conector micro DEANS (T)
1 x Encendido para motor DLE 55
1 x Perforador helice MOKI S150/S180/S215/S250
1 x Corta tubos aire
1 x Molde conector Dean-T
1 x Cristal Universal RX 35.070 Ch 67
1 x Cristal Universal RX 35.170 Ch 77
1 x RANGER Jet NAVY 1.854 mm combo
1 x DJI FPV Combo
1 x ESC ALPHA 60A HV
1 x Motor 2212 (1000KV) Cuadricópero F450
1 x T-Motor U7-V2.0 Kv420
1 x Motor brushless 1806 - 2300 Kv Cuadricóptero
1 x Rueda KOVO espuma 63x12 mm radios especial ligera (2 pcs)
1 x Alicate para "Ball-Link"
1 x Ball link Aluminio M3 (2 pcs)
1 x Salida para cables 28x5 mm (2 pcs)
1 x E-FUN BUG (ROI-Import)
1 x EDF Jet-Flex 80 - 8 Kg
1 x Conector MPX hembra
24,931.49EUR
Fabricantes
Información del Fabricante
Roi-Import
Roi-Import Página Principal
Otros productos
Idiomas
Español English
Monedas