130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Motor DLE 170 M- Paramotors
1 x Big Crow DLE-170M
1 x Motor DLE 430 cc - Paramotors
1 x Motor DLE 200cc Std
1 x Motor DLE 200cc Premium Muffler
1 x 5 mm M2 variable horn
1 x Partall paste 650 g
2 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x 90 mm rods + T patellas set for direction control
1 x 38x4,5 mm wires output (2 pcs)
1 x 100 mm rods set for direction control
1 x Universal Colour Paste deep black 50 g
1 x 250 mm / 16 mm Airbrakes
1 x 1000 ml sealer (DOPE)
1 x Plasti Dip Liquid Tape 429 ml black
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
2 x Aluminium alloy coupler for carbon tube 6/M4
1 x Piloto Jet "Red" 1/6 Scale
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x 1/6 Pilot "Buddy"
2 x Buy Perforated film 100 cm / 10 m
1 x Aluminun wheel collar 6 mm Ø (4 uds)
2 x Extractor piñones 2.3/3.2 mm
1 x Pin hinge 34x16 mm (10 uds)
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x 25 mm carbon servo arm
1 x Extension silicon 50 cm (Futaba)
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Micro flex hinge (12 uds)
1 x Marker ties (20 pcs)
1 x Copier 2x20 cm pcs
1 x Blind nut M6 (4 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x 120x60 mm C SLH KOVO wheel
1 x 
1 x Pin hinge 26x11 mm (10 uds)
1 x Slave-cable USB Easy Sim
1 x 12 mm floating pad (49 pcs)
1 x 25 mm reinforced hinge
1 x 120x60 mm SLH KOVO wheel
2 x EC-Cutter
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Anodized aluminium servo M3x16 screw (4 red pcs)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Miniature brass strap hinge, 1 m
1 x Dust collector for mould cleaning
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x Disposable Injector Bags (30x16cm) 100 pcs
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x Glases Nimbus
1 x Glases Flitemaster
1 x Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x Film release agent PVA 25 ml
1 x PVC grid diagonal 290x185x0.32 mm
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x Mould Resin P 10 kg
2 x PVC grid straight 290x185x0.32 mm
1 x Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Glass fibre sleeve Ø 20 mm
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
2 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x Buy Perforated film 100 cm / 50 m
2 x 95 mm aluminium spinner.
1 x Crystal Universal RX 35.090 Ch 69
1 x Tank gas KUZA 500 cc
1 x Fuel tank 500ml (17oz)
1 x 57 mm aluminium spinner.
1 x Spinner plastic 63 mm Red 2Bl
1 x Spinner plastic white fixed propeller 45 mm
1 x O-Ring SAITO FG-60 R3
1 x 76 mm aluminium spinner.
1 x Extension silicon 25 cm (Graupner)
2 x Extension 90 cm (Futaba)
1 x Extension 30 cm (Futaba)
1 x Cable S.BUS 3 salidas 100 mm
1 x Pan Head Screw M1,6x8 (10 pcs)
1 x Prolongador S-Bus JR/JR 10cm
1 x Fiberglass plate 350x150x0.3 mm
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
2 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x ABS 500 x 400 x 1 mm (white)
2 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
2 x Carbon roving DowAksa / 24k / 1600 tex
1 x Electric spoiler 250 mm (2 pcs)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x Sheet Depron Aero 1250x800x3 mm
1 x Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Fiberglass 5000x1100 mm 49 g/m²
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Peel ply 64 g/m² (plain weave) 150 cm x 20m
1 x Soporte servo KST X08/H and Plus
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Extinguisher CO2 - 2 Kg
1 x Glass fibre braided sleeve (45mm) roll 10m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Panel Honeycom carbon 350x150x3.5mm
1 x Buy Perforated film 100 cm / 20 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Colormatic 2K Soft fine putty white, 1 kg
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x Glass fibre sleeve Ø 20 mm X 10m
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Glass fibre sleeve Ø 20 mm X 20m
1 x Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish
1 x Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Glass fabric 425 g/m² aero,10x1m
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x Vacuum bag, 1200 mm x 50 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x 89 mm double servo arm with bearing (2 pcs)
1 x 50 mm servo arm with bearing (2 pcs)
1 x 40 mm servo arm with bearing (2 pcs)
1 x Cut tube
1 x Turbo Prop KS
1 x Quadcopter Q50 Kit Carbon Fiber
1 x Jeti Black cap
1 x 102 mm aluminium spinner
1 x Crystal Universal RX 35.150 Ch 75
1 x 3D Spinner for DLE 30
1 x 1000 cc gasoline fuel tank complet
1 x Turbine RABBIT 100 SE 11 Kg
1 x Connectors DEANS (T) micro
1 x EDGE 540 1.73m SEAGULL Model
1 x DYNAMOMETER S-1580
1 x Spinner 159x200 mm GFK
1 x Tube bender
1 x Turbine MAMMOTH 25.4 Kg
1 x Servos security connector (2 pcs)
1 x Spinner 140 mm GFK
1 x Spinner 90 mm GFK
1 x Spinner 125 mm GFK
1 x Connectors banna oro 6,0 mm (M/F)
1 x Turbina DRAGON 30 Kg
1 x EDF Jet-Flex 80 - 8 Kg
1 x 280 cc gasoline fuel tank complet
1 x Connectors MPX female
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Turbine CHEETAH 160 SE
1 x Connectors DEANS (T)
1 x 75 mm spinner (Carbon Imitation)
1 x 51 mm aluminium spinner.
1 x Turbine HORNET 85 SE
1 x 70 mm aluminium spinner.
1 x MR30 connector female
1 x DLE Ignition unit
1 x Turbine RHINO 200 SE 20.4 Kg
1 x KS86 V muffler up to 65cc
1 x Spinner 100 mm CFK
1 x Cono NUT 5/16"x 24 -M4
1 x 90 mm CFK long Spinner fixed by a central screw
1 x Crystal Universal RX 35.040 Ch 64
1 x 45 mm aluminium spinner.
1 x KS86 S-6 muffler up to 65cc
1 x Copier 5x20 cm pcs
1 x E-FUN BUG (ROI-Import)
1 x Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x Spinner plastic white fixed propeller 51 mm
1 x Crystal Universal RX 35.050 Ch 65
1 x 38 mm aluminium spinner.
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x Crystal Universal RX 35.020 Ch 62
1 x "Taxi Tank" Fuel Tank
1 x RCEXL Electronic ignition twin A-02
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension silicon 75 cm (Graupner)
2 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Premium servo extension 25cm
1 x Extension 15 cm (Futaba)
1 x Futaba Female 40 cm extension
2 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Extension silicon 35 cm (Futaba)
1 x Extension silicon 30 cm male (Graupner)
1 x Extension silicon 100 cm (Futaba)
1 x Extension silicon 10 cm (Graupner)
1 x Extension PVC 150 cm (Graupner)
1 x Screw M4x30 (10 pcs)
1 x Screw M3x5 (10 pcs)
1 x Spring pin Ø 1 x 6 mm (10 pcs)
1 x Screw M3x8(10 pcs)
1 x Cabel "Y" 30 cm (graupner)
1 x Cabel "Y" 15 cm
1 x EXTRA NG 85" 2159mm red/white
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x TP/TopFuel - XH 2/3S Adapter
1 x CC 03
1 x 5 LiPo XH>EH adapter
1 x 30 cm BEC cable (female)
1 x Circlick securite
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x USB HLS prog. interface
1 x 30 cm BEC cable (male)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x CC 05
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x EDGE 540-A 74" (1880 mm)
1 x EXTRA NG 85" 2159mm yellow/blue
1 x EXTRA 300 78" V3 Yellow/Red/Blue
1 x LASER 260 60" V2 ARF Red (SkyWing)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Sukhoi 29S 2,6 m,CF landing gear(SebART)
1 x Sebart 2.2 m YELLOW/BLACK (SebART)
1 x Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x ULTRA STICK 10 cc ARF
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x CC 01
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x TrainerCord (master-learner)
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x Cabel charger transmitter GRAUPNER
1 x 3 LiPo XH>EH adapter
1 x Dean "T" - Futaba Adapter
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x JETImodel SINGLE BEC
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Battery charging cable XT60
1 x 2 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 4 LiPo XH>EH adapter
1 x BEC 3A FOXY
1 x APM2.6 Power module with 5.3V DC BEC
1 x CC 02
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Civilian pilot "Curt" size 9cm (Slimline)
2 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Steering arm 16 mm Ø 3 mm
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x 82 mm aluminium spinner.
1 x A/C quality beech plywood 600x300x5.0 mm
1 x 80x40 mm hard foam KOVO wheel
1 x Crystal Universal RX 35.170 Ch 77
1 x 89 mm aluminium spinner.
1 x Aluminum Fold Prop Spinner 38 mm / 5 mm
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Lock nut aluminium M2 (4 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x Blue Aluminium lock nut M3 (4 pcs)
1 x Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
1 x Carbon plate 350x150x3.0 mm
1 x Glass fibre braided sleeve (45mm) roll 20m
1 x Combo FOXY C3530-700 + FOXY 80 amp
1 x Balsa panel 8.0x100x1000 mm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x Carburator Moki S 180
1 x Long adjustable aluminium control horn 2,8x24
1 x Carbon plate 500x400x2.0 mm ISOTECH
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Male connector for 16 pines AWG
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x Carbon plate 550x350x4.0 mm ECOTECH
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x Mold plugs XT-30
1 x Male connector for 10 pines AWG
1 x MPX plug mold V1
1 x Long extra-strong control horn with bearing 2,8x34
1 x Long adjustable control horn with bearing
1 x Micro Tarjeta SD Rapid Rush 16 GB
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Connectors banna oro 3,5 mm (M/F)
1 x Cockpit aluminium closing 4.7g
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Spinner INO 57 mm Chrome (Imitacion metal)
1 x Spinner INOVA 45 mm White
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x Giant Scale Muffler SLIMLINE D.A. 100 (2pcs)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Pilot "Anthony" (Slimline)
1 x Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x Pilot "Goose" (Slimline)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Horn 20x28,5 mm (2 pcs)
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
59,795.94EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies