Top » Catalog » O.S. » OSGT154040

419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Pitts Muffler for D.A. 100
1 x KS86 V muffler up to 65cc
1 x Giant Scale Muffler D.A. 70 (2pcs)
1 x Silencer with rear exhaust MTW TDH 110
1 x 180° TUBE-ANGLE Ø 25 mm
1 x Air Intake manifold 90° - Large
1 x Stainless Steel Bend D 25x0,5mm
1 x Captador RCEXL para DA
1 x Canister combo DLE 55 cc
1 x Giant Scale Muffler SLIMLINE D.A. 100 (2pcs)
1 x Solid Headers for Single Cylinder DA-60 Solid 50mm drop
1 x Escape Krumscheid 81-6 hasta 55 cc
1 x Canister combo DLE 120 cc
1 x Stainless Steel S-Bend D25x0,5mm
1 x Tufnol Choke Lever Arm d=4,7mm
1 x L ELBOW 90º ø 25 mm
1 x Giant Scale Muffler D.A. 150 (2 pcs)
2 x Giant Scale Muffler D.A. 170 (2 pcs)
1 x Silencer with rear exhaust DA-120
1 x Rocket cardboard tube 25mm x 24mm x 230mm
1 x Cotter MVVS 45/50/58 cc
1 x Gasket carburettor/insulator for ZG 38/S/SC
1 x 15 mm gas motor standoff
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Tubo Teflon Ø25 mm x 10cm
1 x 20 mm gas motor standoff
1 x Carburator joints for SAITO FA80/80GK/72/72GK
1 x Metalic joint for DA-50R/DA100 cilinder/elbow
1 x Glow/Gas/Smoke/Kerosene filter
1 x Selfstart electronic switch
1 x Gasoline big filter
1 x Filetro gasoline filter Tillotson OW497
1 x Propeller diller for EME35 and DLE35
1 x EXHAUST STACK Ø 25 mm DLE 55 RA / DLE 61
1 x Stainless Steel Tuned Pipe for engines from 45 to 80 cc
2 x EXHAUST STACK Ø 25 mm GP-61/123
1 x EXHAUST STACK Ø 28 mm DLE85/DLE170 B2
1 x Extractor piñones 2.3/3.2 mm
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Threaded coupler M3 (10 uds)
1 x Oratex Antik 2m
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x White smoke bombs AX-18 (5 pcs)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Horn 13,5x16 mm (2 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Glases Moritz
1 x Red smoke bombs AX-60 (5 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Futaba male 40 cm extension
1 x White smoke canister 140 g
1 x Cabel "Y" 30 cm (graupner)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x One touch canopy lock
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x ABS I Strip 20x10x1000 mm
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x SE Ring 400 mm (2 pcs)
1 x Towing hook
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Connectors DEANS 4 pins (1 pair)
1 x ABS tube 12.0x10.0x1000 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Cabel "Y" 30 cm (Futaba)
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x ABS tube 7.0x5.0x1000 mm
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Carbon fiber rod 16 mm x 1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Support Pitot JETI
1 x BALSA triangular 6x6x1000 mm
1 x Support pumb/filter Xicoy X45
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Pine wood slat 3.0x5.0x1000 mm
1 x APM2.6 Power module with 5.3V DC BEC
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Propeller Pleg CAM Carbon 15x8
1 x Softshell Hispano Aviación
1 x 30cm Flexible Stainless Steel Exhaust Tubing D=16mm
1 x 25 mm gas motor standoff
1 x Dia. 20x15 mm teflon tube for escape
1 x Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x EME 55cc motor support (4 pcs)
1 x SLICK 360-A 104" (2640 mm)
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x Sukhoi 29S 2,6 m White/Blue (SebART)
1 x ULTRA STICK 10 cc ARF
1 x Vest clothes Hispano Aviación
1 x EDGE 540-A 74" (1880 mm)
1 x Motor NGH GT-9 V2
1 x Motor ROTO-85 FS NG 4T 2 cylinder Boxer
1 x MTW TD120K MUFFLER
1 x Metalic joint for DA-85/DA170 cilinder/elbow
1 x OS Engine 105HZ-R Heli
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x MR30 connector male
1 x Carbon plate 550x350x1.5 mm ECOTECH
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Tape GFK 38 mm
1 x Connectors DEANS (T) micro
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x WingFix ULTRA Black Edition
1 x Conector JAPAN G2 Set 5 pares
1 x Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Field folding model stand
1 x 12 mm floating pad (49 pcs)
1 x XH female balance (9S) connector (2 pcs)
1 x Ply-Span 450x600/13g White
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Oracover ROYAL RED 2m
1 x Oracover Orange 2 m
1 x Ply-Span 450x600/13g Blue
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x 
1 x SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x Spinner NUT 1/4x28
1 x Spinner NUT M5
1 x Spinner NUT M6
1 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x Ø 50-60 mm canister holder
1 x Dia. 28x15 mm PTFE tube for escape
1 x Spinner NUT M5
1 x Motor ROTO-35 FS BM 4T
1 x Motor NGH GF30
1 x Carburador OS (Type 40K) 46AXII
1 x Motor OS FS 95 V 4T
1 x OS Engine 105HZ-R Heli with pipe 105
1 x Motor OS 3820-1200 electric
15,976.48EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies