419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Rótula M3 RPA's-UAV's
4 x	Rótula con bola M3 (10 pcs)
2 x	Rótula con rodamiento M2 22x5,5
2 x	Rótula V3 aluminio M2,5 Diam (2 pcs)
3 x	Rótula V1 corta M2/M1,6 3Diam negra (6 pcs)
3 x	Rótula V3 aluminio M3/5 Diam (2 pcs)
3 x	Rótula MAXI con bola/tornillo M3 (2 uds)
2 x	Rótula V2 M2,5 5Diam negra (2 pcs)
2 x	Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
3 x	Rótula larga M2 con bola/tornillo (6 uds)
2 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
2 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
1 x	Rótula con rodamiento M2,5 22x5,5
4 x	Rótula metálica M2/2 azul (2 pcs)
1 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
2 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
3 x	Rótula con bola M2 (10 pcs)
3 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Rótula larga M3 con bola/tornillo (6 uds)
2 x	Rótula V2 corta M2,5 5Diam negra (2 pcs)
1 x	Rotula 6 mm hexagonal con bola M3 (10 pcs)
2 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
2 x	Rótula con rodamiento M3 22x5,5
3 x	Rótula V3 aluminio M3/5 Diam con base corta (2 pcs)
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Rótula con bola M2,5 (10 pcs)
1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Camara 800 TVL CMOS para FPV
1 x	Cera desmoldeante 650 g
1 x	Pasta para estaño 20 g
1 x	Plasti Dip Liquid Tape 429 ml rojo
1 x	Pasta universal color Blanco (RAL 9003) 1 Kg
2 x	Gancho de lanzamiento fijo
1 x	Gancho de remolque hasta 3m
1 x	Gancho remolque inferior plano
1 x	Rótula V2 M2 5Diam negra (2 pcs)
1 x	Rótula corta M1.6 con bola/base (6 uds)
1 x	Rótula metálica M3/3 azul (2 pcs)
2 x	Rótula corta M3 con bola/tornillo (6 uds)
2 x	Rótula INDUSTRIAL con bola M3 (2 uds)
3 x	Rótula con bola plana M3 (10 pcs)
1 x	Rótula V2 corta M2 5Diam negra (2 pcs)
1 x	Rótula corta M2 con bola/tornillo (6 uds)
2 x	Rótula M3
1 x	Tubo ABS 10,0x8,0x1000 mm
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Oracover Amarillo CADMIO 10 m
1 x	Rótula M3 con tornillo y tuerca(6 uds)
1 x	Soporte bomba Xicoy X45
2 x	Rótula M3
1 x	Tubo de latón (L 1000 mm, Ø8,0 mm, Ø7,1 mm
2 x	Tubo carbono 3K-PW (Ø16 mm, Ø14 mm L:1000 mm)
1 x	Tubo carbono 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Tubo de latón (L 1000 mm, Ø8,0 mm, Ø6,1 mm
1 x	Tubo de latón (L 1000 mm, Ø13,0 mm, Ø12,0 mm)
1 x	Tubo carbono 3K-PW (Ø14 mm, Ø12 mm L:2000 mm)
1 x	Tubo carbono 3K-PW (Ø30 mm, Ø26 mm L:1000 mm)
1 x	Plancha carbono 700x550x0,5 mm
1 x	Plancha de goma espuma (310x210x5 mm)
1 x	Plancha estireno 320x120x1.0 mm
1 x	Plancha fibra vidrio 350x150x3.0 mm
1 x	Piloto 1/10 "Jack"
2 x	Soporte soldadura universal aluminio
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x	Rueda KOVO SLH 120x60 mm
1 x	Tubo de latón (L 1000 mm, Ø10,0 mm, Ø9,1 mm)
1 x	Tubo carbono 3K-Matt (Ø25 mm, Ø23 mm L:1000 mm)
1 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Plancha fibra vidrio 350x150x2.0 mm
1 x	Cinta tubuladora (5 m)
2 x	Cinta SURFACE 21mm x 5m
1 x	Cinta fibra vidrio 50 mm
1 x	Sistema cierre 300 mm con abrazadera (2 pcs)
1 x	Release film 100 cm x 50 m
1 x	Repelente agent PVA 250 ml
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Listón de PINO 3,0x10,0x1000 mm
2 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Servo KST X10 MINI ala 10mm 23g 7.5Kg
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x	Plancha fibra vidrio 350x150x2.5 mm
1 x	Plancha carbono 550x350x3.0 mm ECOTECH
1 x	Piloto civil "Pamela" tamaño 9cm (Slimline)
1 x	Piloto 1/12 "Tom"
1 x	Piloto civil "G-Man" tamaño 9cm (Slimline)
2 x	Piloto 1/10 "Jimmy"
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Piloto civil "Joe" tamaño 9cm (Slimline)
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Iniciadores eléctricos cohetes (6 pcs)
1 x	Soporte ventral para AX-18/AX-60
1 x	Cartucho de humo Rojo 100 g
1 x	Cartuchos de humo AX-60 blanco (5 pcs)
1 x	Gancho de remolcador
1 x	Horn de mando carbono 20 mm
1 x	Piloto 1/7 "Japonés"
1 x	Rueda KOVO C SLH 110x55 mm
2 x	Piloto 1/6 "John"
1 x	Rótula larga M1.6 con bola/base (6 uds)
1 x	Rueda KOVO SLH 100x50 mm
1 x	Rueda Jets 101x28 (4.0") centro aluminio
1 x	Gancho de remolque hasta 4,5 m
1 x	Tapon deposito 22 mm (Espiga doble integrada)
1 x	Gafas FPV Eachine EV800D
1 x	Soporte grifo FESTO (2 pcs)
1 x	Soporte Pitot JETI
1 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	Soporte conector MPX enrasado (6 pcs)
1 x	Soporte conector MPX (6 pcs)
1 x	Listón de NOGAL 2,0x2,0x1000 mm
2 x	Soporte filtro FESTO (4 pcs)
1 x	Soporte conector MPX empotrado (6 pcs)
2 x	Tapa estado carga XT-60 (6 pcs)
1 x	Soporte bomba/flitro Xicoy X45
1 x	SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x	SCANNER 46-55 Sport Scale 1:7 ARF
1 x	TRAINER RC Pilot V2 90" w/r ARF
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
2 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	CARBON CUB 15cc ARF 2280 mm
1 x	Set montaje amortiguador para modelos 5-10 kg
1 x	Amortiguador FEMA 400 Newtons
1 x	Sukhoi 29S 2,6 m,Tren carbono(SebART)
2 x	EDGE 540-A 105" (2660 mm)
1 x	EXTRA 330L 35% pack hardware (Precision Aerobatics)
1 x	ULTRA STICK 10 cc ARF
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	EDGE 540 1.73m SEAGULL Model
1 x	Cartuchos de humo AX-9 blanco (10 pcs)
1 x	Paracaidista
1 x	Cartuchos de humo AX-18 blanco (5 pcs)
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Cartuchos de humo AX-60 rojo (5 pcs)
1 x	Aceite para hacer humo 3l Smoke
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Piloto 1/4 "Mike"
1 x	Fibra de vidrio 49 g/m² (1,10 x 3m)
1 x	Escape O-Ring SAITO FG-60 R3
1 x	Fibra vidrio trenzada "manga" 45 mm x 20m
1 x	Cartuchos de humo AX-60 amarillo (5 pcs)
1 x	Cinta fibra vidrio 25 mm
1 x	Cinta fibra vidrio 38 mm
1 x	Sistema cierre negro doble cara 20x1000 mm
1 x	Film perforado 145 cm / 50 m
1 x	Servo KST X08 Plus 9g HV servo
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
2 x	Manga de fibra de vidrio Ø 20 mm x 20m
1 x	Aro soporte P-20 OPUS V-Jet 60mm
1 x	Peel Ply liso 95 g/m2 100 mm x 100 m
1 x	Manta bolsa de vacio 300 gr/m2 Bobina 1m
1 x	Batería LiPo GENS 120 mAh 2S 7,4V 30C (Gens Ace) F3P Pack
1 x	Batería LiPo GENS 5300 mAh 4S 14,8V 30C (Gens Ace)
1 x	Batería LiPo GENS 4800 mAh 5S 18,5V 18C (Gens Ace)
1 x	Peel Ply liso 93 g/m2 150 cm x 5 m
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Fibra vidrio trenzada "manga" 45 mm x 10m
1 x	AC-10 pre-rotacion + motor
1 x	Motor brushless 1806 - 2300 Kv Cuadricóptero
1 x	Helice PT 22x10 EL
2 x	Depósito de gasolina de 1000 cc completo
1 x	Prolongador servo 20 cm HITEC/JR
1 x	Cono INO de 102 mm (Imitacion carbono)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Alicate para "Ball-Link"
1 x	Fibra Vidrio 425 g/m² Aero (10m x 1m)
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Deposito combustible 1500 ml (50oz)
1 x	Motor OS 55 AX
1 x	Escape Moki 100 BVT
1 x	Rueda 102x26 centro aluminio Ø6.0 mm
1 x	Rueda KOVO C SLH 120x60 mm
1 x	Cuadricóptero Q-250 Kit Carbono
1 x	Fibra de vidrio picada 0.2 mm (1 Kg)
1 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Fibra vidrio 280 g/m2 (Twill weave) 50m x 1m
1 x	Plancha de balsa 10x100x1000 mm
1 x	Fibra Vidrio 390 g/m² Aero (10m x 1m)
1 x	Cristal Universal RX 35.090 Ch 69

17,240.54EUR