419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

under request

Reviews

Quick Find

Shopping Cart

1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x	Aluminium sheet 500x250x0,5mm
2 x	Buy Perforated film 100 cm / 10 m
2 x	ABS 500 x 400 x 1 mm (white)
1 x	Buy Perforated film 100 cm / 20 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
3 x	ABS 500 x 400 x 2,0 mm (white)
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Buy Perforated film 100 cm / 50 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Screw-lock connector M2 (2 uds)
2 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
3 x	Covered closure or fairings
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
3 x	Steering arm 16 mm Ø 3 mm
1 x	One touch canopy lock
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
2 x	Steering arm 12 mm Ø 4 mm
2 x	Crimping sleeves for cable 0.70 mm (10 pcs)
2 x	Cockpit plastic closing
1 x	SUS wire 3m (nylon coated)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
2 x	Steering arm 12 mm Ø 4 mm (2 uds)
2 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	Carbon plate 350x150x1.5 mm
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Carbon plate 350x150x5.0 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	Foam plastic plates (310x210x3 mm)
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	Styrene plate 320x120x0.5 mm
1 x	Carbon plate 350x150x0.5 mm
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Carbon plate 350x150x3.0 mm
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
2 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Ventus 1:4 set of instruments
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	4 LiPo XH>EH adapter
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	MAX pilot ARTF
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Parachute PV6 for F3J
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
4 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	250 mm / 16 mm Airbrakes
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	45 mm rods set for direction control
2 x	28x5 mm wires output (2 pcs)
2 x	Canopy Latch
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	100 mm rods + T patellas set for direction control
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
2 x	Cable grommet Ø 5 mm (4 uds)
1 x	Cockpit latch closing I=10 mm
2 x	Steering arm 16 mm Ø 4 mm
2 x	Locking cable tie 4.6x203 (uds)
1 x	Carbon plate 350x150x4.0 mm
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Carbon plate 350x150x2.5 mm
1 x	Foam plastic plates (310x210x5 mm)
1 x	38 mm fenders (10 pcs)
1 x	120x60 mm SLH KOVO wheel
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Angle support XT60 conector
1 x	TMM 2512-3S heli
1 x	Aeronaut Baumbeschlag (Ms) 10 mm
1 x	TMM 1210-3S heli
1 x	Motor mount class 48"
1 x	290x4 mm M4 shaft ship
1 x	Motor mount EDGE 540 48"
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Cockpit aluminium closing 4.7g
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Cockpit metalic closing
1 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
2 x	Control for forward wheel (MINI)
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Lead with adhesive (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Allen wheel collar M3x3
1 x	Landing gear frontal support 29x26x13,5
1 x	Split pin 1x8 mm (10 uds)
1 x	Split M1,2x10 (10 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Allen wheel collar M4x4
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	Allen wheel collar M4x6
1 x	Snap short M2 (10 uds)
1 x	Support FUEL DOT V3
1 x	OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE
1 x	OS 37 SZ-H, Crankshaft
1 x	Propeller Helice 4BL 70 mm M4 plastico Dcha
1 x	Propeller RABOESCH M4 70 mm (5 Blades) (Right hydropropeller)
1 x	Propeller APC 12x6 Electric
1 x	Propeller RABOESCH M4 60 mm (4 Blades) (Right hydropropeller)
1 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	Propeller RABOESCH M4 70 mm (5 Blades) (Right)
1 x	Pegamento Pu R 50g polyuretano
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	OS 37 SZ-H, Connecting rod
1 x	Motor OS 37 SZ-H
1 x	Carburador OS (Type 40K) 46AXII
1 x	Motor OS MAX 160 AX
1 x	Motor OS FS 95 AX

7,458.94EUR