Top » Catalog » O.S. » OSGT154040

419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Straightened rod Ø 1.5 mm x 1500 mm
2 x 2,3 mm Prop Adapter M5
2 x 5 mm Prop Adapter M6
1 x 4 mm Prop Adapter M6
3 x Straightened rod Ø 2.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x 5 mm Prop Adapter M8
1 x Straightened rod Ø 1.2 mm x 1500 mm
2 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
2 x Straightened rod Ø 7.0 mm x 1000 mm
3 x Aluminium rod Ø 4.0 mm x 3000 mm
4 x Straightened rod Ø 0.8 mm x 1000 mm
1 x 2,3 mm Prop Drive Günther M4
4 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x 6 mm Prop Adapter M8
3 x Brass rod Ø 0.5 mm x 1000 mm
4 x Straightened threaded rod M3 - 1m
2 x Brass rod Ø 1.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Straightened rod Ø 1.0 mm x 1000 mm
3 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
3 x Straightened rod Ø 1.5 mm x 1000 mm
2 x 2 mm Prop Adapter M5
1 x BALSA trip 2.0x2.0x1000 mm
2 x Beech dowels 2.0 x 1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
2 x Linden wood slat 2.0x2.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
2 x Pine wood slat 3.0x5.0x1000 mm
2 x BALSA trip 4.0x4.0x1000 mm
2 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
2 x Walnut wood slat 1.5x1.5x1000 mm
4 x BALSA triangular 6x6x1000 mm
2 x Beech dowels 10 mm x 1000 mm
1 x 3 mm Prop Adapter M6
1 x 5 mm Prop Adapter M6
1 x Prop Shaft Adapter 5 mm/M8 "long"
2 x 4 mm Prop Adapter M6
1 x Small Crow DLE-170M
1 x 5 mm Prop Adapter M8
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x 3.2 mm Prop Adapter M8
1 x Motor DLE 200cc Std
2 x Motor A2212/13T
1 x 1000 ml sealer (DOPE)
1 x Cabel "Y" 30 cm (graupner)
1 x Premium servo extension 75cm
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x 1/12 Pilot "Tom"
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Para-RC Mix
1 x Straightened threaded rod M2-1m
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
2 x Liston HAYA 8 x 8 x 1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
2 x Trailing edge BALSA 35x8x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x 2.3 mm Adapter for 30 mm spinners
2 x HITEC Power Supply 30A. Max. 540w
1 x 6 mm Prop Adapter M8
1 x Power supply NT 40 Amp.
1 x 3,2 mm Prop Adapter M6
1 x 5 mm Prop Adapter M8
2 x 2,3 mm Prop Adapter M6
1 x 4 mm Prop Adapter M8
1 x 4 mm Prop Adapter M8
1 x Glases Moritz
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
2 x Motor mount class 48"
1 x XT-90 connector (pair)
1 x XH LiPo extension lead
1 x XH male balance (9S) connector (2 pcs)
1 x Red 4 mm connector holder
1 x XH female balance (9S) connector (2 pcs)
1 x MPX Sub-D Adaptor
1 x Red 3m5 mm connector holder
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x Glases Stratus
1 x EDGE 540-A 91" (2310 mm)
1 x EDGE 540-A 105" (2660 mm)
1 x Quick hose connector 3-3 mm
1 x Servo arm with 5 mm hole to FEMA 9810A
1 x Professional Servo tester
1 x ANGEL 48" pp orange/black/white
1 x LASER 260 60" V2 ARF Yellow (SkyWing)
1 x SLICK 360-B 104" (2640 mm)
1 x LASER 260 60" V2 ARF Red (SkyWing)
1 x SLICK 360-A 104" (2640 mm)
1 x EXTRA NG 85" 2159mm yellow/blue
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x EXTRA NG 85" 2159mm red/white
1 x ANGEL 48" pp red/blue/white
1 x ARS 300 91" ARF 2311mm ORANGE
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x SkyMaxx 1.550 mm (kit)
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x BOOMERANG II 40/46 ARF 1.55mm
1 x PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Landing gear strap large (4 uds)
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Tap FESTO 4-4 mm
1 x T-Hose connector 2-2-2 mm
1 x Air pressure gauge
1 x Y-Hose connector 4mm
1 x Wheel cover holder Ø 6 mm (2 uds)
1 x Wheel cover holder Ø 5 mm (2 uds)
1 x Quick hose connector 6-6 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Wheel collar 2 mm Ø (4 uds)
1 x Servo TOPMODEL DS1413 T
1 x Angled clevis with threaded rod M3
1 x Quick hose connector 4-4 mm
1 x Y-Hose connector 3-3-3 mm
1 x 90x75 mm standart servo cover
1 x Wheel cover holder Ø 3 mm (2 uds)
1 x 40 mm air cylinder
1 x 58 mm micro servo cover
1 x Y-Hose connector 6-6-6 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Birch plywood plate 600x300x2.5 mm
1 x Lite Plywood panel 600x300x2.0 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Balsa panel 8.0x100x1000 mm
1 x Balsa panel 1.5x100x1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Birch plywood plate 600x300x1.2 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Extension MPX-MPX 20 cm
1 x USB Charger 120-240V AC
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x Big Crow DLE-170M
1 x Cylynder DLE 20-RA
1 x DLE 55-RA Muffler
1 x XH female balance (3S) connector (2 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x XH female balance (2S) connector (2 pcs)
1 x XH male balance (5S) connector (2 pcs)
1 x Tarjeta programadora RAY G2
1 x Canister combo DLE 120 cc
18,081.62EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies