419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Servo NARO Max Std
1 x Bateria arranque incl. compresor inflado
1 x Plancha contrachapado Abedul 600x300x6,0 mm
2 x Escape Pitts en kit para CAP 21
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x Codo escape para SAITO FA65/72/80/82a/91S/100/
2 x Escape Pitts OS MAX.35.40 FP
1 x Piñon motor rotor LA-500
1 x Set asiento-piloto LA500
1 x Motor rotor LA-500
1 x Eje de la cabeza rotora LA500
1 x Cristal TX 35.180 Ch 78
1 x Cristal Universal RX 35.040 Ch 64
1 x Hélice POWER-PROP 7x7
1 x Colector admision 90º Largo
1 x Casquillo para grimpar cable de 1,3 mm (10 pcs)
1 x Cierre cabina V1 M3 Azul (2 pcs)
1 x Servo MKS HBL380
1 x Servo MKS HBL550
1 x Cierre cabina 33/23.5mm (2 uds)
1 x Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x Servo MKS HV6150 "anclaje horizontal"
1 x Anclaje varilla mando M2 mm prisionero/tuerca (2 uds)
1 x Servo MKS HV6120H
1 x Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x Servo SAVOX SB-2272 SG Highvoltage brushless (Rotor de cola)
1 x PowerBox DigiSwitch V2 MPX/JR
1 x POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x Canulas repuesto Mixing tube 50+25g (10 pcs)
1 x Brazo servo Alu 90º eje 3 mm
1 x Ferrita con funda
1 x Modulo Bluetooh JETCENTRAL
1 x Varilla carbono 20 mmx1000 mm
1 x Servo HITEC D951 TW
1 x AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x Varilla carbono 0.8 mmx1000 mm
1 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x Servo HITEC HS-325 BB
1 x Perfil Acero Inox. 15.5x8.5x1000 mm
1 x Arandela conica alumino M3 rojo (8 pcs)
1 x Modulo PPM Encoder
1 x Epoxy Resin L + Hardener LT kit/ 895g
1 x Arandela de bloqueo 2 mm (10 pcs)
1 x Arandela abierta 3.1 mm (20 pcs)
1 x Arandela de bloqueo 3 mm (10 pcs)
1 x Epoxy 40 min (Acelerador). 1 Kg
1 x Sensor digital Air Speed con Pitot
1 x Arandela conica ancha alumino M4 Oro (4 pcs)
1 x Arandela 2.2 mm (20 pcs)
1 x Carro remolque para veleros 720 x 239 mm
1 x PowerBox Competition
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Arandela abierta 2.1 mm (20 pcs)
1 x PowerBox MERCURY SR2
1 x Epoxy Resin L + Hardener LT kit/ 3125g
1 x PowerBox OLED display
1 x Arandela conica ancha alumino M3 rojo (4 pcs)
1 x Arandela conica alumino M4 verde (8 pcs)
1 x Power Box GPS Sensor III
1 x Arandela conica alumino M3 negro (8 pcs)
1 x PIX Hawk con accesorios
1 x Extension carga 50 cm para 2 Baterias
1 x Extension 50cm Dispaly Royal/Champion SRS
1 x Varilla latón Ø 1,5 mm x 1000 mm
1 x Colador protector turbina K140/180/210
1 x Bancada servo alas HS80/HS81/82/85 (2 pcs)
1 x Servo GO-1013 MG 3.8kg
1 x Varilla latón Ø 0,5 mm x 1000 mm
1 x Acelerador Aero EPH 161 (250 g)
1 x Cianocrilato MD GLUE+ 405 20g (viscosidad media)
1 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x Servo HITEC HS-5475 HB Digi
1 x Servo HITEC HS-225 MG
1 x Servo HITEC HS-5065 MG digital
1 x Turbina HORNET 85 SE
1 x Varilla carbono 3.0 mm x 1000 mm
1 x Thixotropic agente TM100, tin/415g (aprox. 5 L)
1 x Servo HITEC HS-125 MG
1 x Bayoneta de carbono cuadrada 5x5x220 mm
1 x Colador protector turbina 94 x 32 mm
1 x Servo HITEC D-955 TW Titanium
1 x Varilla acero Ø 0,5 mm x 1000 mm
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x Varilla acero Ø 6,0 mm x 1000 mm
1 x Varilla carbono 1.5 mm x 1000 mm
1 x Bascular < 40 Kg
1 x Varilla carbono plana 1000 x 5.0 x 1.0 mm
1 x Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x Perfil Acero Inox. 10.5x5.7x1000 mm
1 x Perfil de ABS "L" 3,0x3,0x1000 mm
1 x Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x Perfil Acero Inox. 6.3x3.5x1000 mm
1 x Perfil de ABS "T" 2.0x2.0x1000 mm
1 x Canal de ABS de 3,0x6,0x1000 mm
1 x Conector ABS "L" 4.0 mm x 1000 mm
1 x Perfil Acero Inox. 14.5x9.6x1000 mm
1 x Cristal TX 35.050 Ch 65
1 x Rueda espuma Ø 50mm x 19 mm (2pcs) eje Ø 3.5mm
1 x Captador OS GT 33 cc
1 x Motor OS 37 SZ-H
1 x Palanca de dirección
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Arandela de la rueda
1 x Carena delantera LA500
1 x Housing-lower del cíclico LA500
1 x Junta humo metalica G30 (DLE30/DLE60)
2 x Junta humo metalica G35 DLE35
1 x Extensión escape motor OS 120 AX
1 x Cristal Universal RX 35.140 Ch 74
1 x Cristal Universal RX 35.090 Ch 69
1 x Cristal de Emisora 35 Mc/s Ch 77
1 x Cargador iCharger 4010 Duo
1 x Cristal RX 35.020 Ch 62
1 x Bahía de la batería
1 x Tapon combustible magnetico Extreme Flight Azul
1 x EXTRA 330SC-E 95" Orange/Blue/White
1 x Bancada motor EDGE 540 48"
1 x EXTRA 300 78" V3 Orange/Blue
1 x Rueda 115 mm con electrofreno (2 uds)
1 x Rueda 70x23 centro aluminio Ø3.5 mm
1 x Rueda espuma Ø 60mm x 21 mm (2pcs) eje Ø 4.0mm
1 x Rueda 76x23 centro aluminio Ø3.5 mm
1 x Neumático Ø 90 mm (1 ud) Electron Retracts
1 x Rueda de cola 28 mm
1 x Rueda FEMA 112 mm / 6 mm
1 x Carburador OS (Type 40K) 46AXII
1 x Eje MVVS 3.5 Sport
9,608.33EUR
Fabricantes
Información del Fabricante
O.S.
O.S. Página Principal
Otros productos
Idiomas
Español English
Monedas