419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

under request

Reviews

Quick Find

Shopping Cart

1 x	Horn 5/10 with M2 Bearing
3 x	Horn DU-BRO 1/2 (2 pcs)
3 x	Horn mando small (2 pcs)
2 x	6 mm red aluminium threaded horn with patella
1 x	Extra-long adjustable aluminium control horn 2,8x34
2 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
4 x	Horn F3A de Titanium 16 mm (2 units)
3 x	Cable with accesories
4 x	Horn 6/20 with M3 Bearing
2 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
2 x	Horn DUBRO 1/2A
2 x	Brass control horn M2 long for wire (10pcs)
2 x	6 mm aluminium horn with patella
3 x	Adjustable brass horn threaded M3
2 x	Horn 6/27 with M3 Bearing
2 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Horn 5/20 with M2 Bearing
4 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	20 mm carbon horn
3 x	Horn for flap control (1 pcs)
3 x	5 mm M2 variable inclined horn
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Horn with ball 40x30
1 x	Ferrita 27x14x7 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Ferrita 14x8x5.5 mm
2 x	Brass control horn M2 short for wire (2 pcs)
3 x	RH long aluminium horn (2pcs)
3 x	Control horn long w/ball
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
3 x	Horn 16,5x20 mm (2 pcs)
2 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Small aluminium horn gold (2pcs)
2 x	Short adjustable control horn 3x24
2 x	Long horn 50x26
2 x	Horn with ball 55x40
1 x	Horn 20x28,5 mm (2 pcs)
3 x	Threaded coupler ALU M2 Ø 3 (2 uds)
3 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x
1 x	Small aluminium horn red (2pcs)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Micro control horn (2 pcs)
1 x	Long adjustable control horn 3x34
2 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
2 x	Indoor hinge with servo arm integraded
1 x	Small adjustable aluminium control horn with bearing 2,8x15
2 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Rudder forward 90x28 "type Kato"
1 x	Horn mando long (2 pcs)
2 x	Extra long horn 60x30
3 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
3 x	5 mm M2 variable horn
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Small aluminium horn blue (2pcs)
2 x	Horn 5/15 with M2 Bearing
2 x	Ply-Span 450x600/13g Orange
1 x	ORACOVER transparent Yellow (10 m)
1 x	Oracover Green10 m
1 x	Oracover Black 10 m
2 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	ORACOVER Ferrari red (2 m)
1 x	Oracover CHROME 2m
1 x	Oracover GREY Seafire Sea 2m
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oratex Silver 2m
2 x	Oracover Yellow CUB 10 m
1 x	Oracover Yellow CADMIO 10 m
2 x	Ply-Span 450x600/13g Blue
1 x	Oracover light Grey 2m
2 x	Oratex Yellow Cub 10 m
1 x	Oracover White 2 m
1 x	Oracover White 10 m
1 x	Oracover Verde 2 m
2 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oracover Yellow CUB 2 m
1 x	Oratex White 2m
2 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Oratex Red Fokker 10 m
1 x	Oracover Orange 2 m
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Squared carbon wing joinner 5x5x220 mm
2 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
2 x	EasyFLY Addon
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Tail gear set (60-120 class)
2 x	Small control horn with bearing (2 pcs)
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	4 mm Prop Adapter M8
1 x	4 mm Prop Adapter M6
2 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
3 x	6 mm M3 variable inclined horn
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Stick coupler Ms 15 mm
1 x	3,2 mm Prop Adapter M8
2 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Nylon gear block Ø 6 mm (2 uds)
1 x	Landing gear strap small (4 uds)
1 x	Body for landing gear Ø 3 mm
1 x	Dual Sequencer Gear and Canopy
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	17 mm servo arm with ball link DES Graupner
1 x	Futaba 46 mm servo arm with ball link
1 x	Futaba 38 mm servo arm with ball link
1 x	Landing gear clamp for Ø 4 mm (4 uds)
1 x	Futaba 30 mm servo arm with M3 ball link
1 x
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Rudder forward 80x28 "type Kato"
1 x	Rudder forward 70x28 "type Kato"
1 x	Small adjustable control horn with bearing
1 x	Horns indoor
1 x	SlowFlyer control horn (3 pcs)
1 x	Long adjustable control horn with bearing
1 x	Long adjustable aluminium control horn with bearing 2,8x15
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	SERVO DES 658 BB MG
1 x	SERVO DES 707 BB MG
1 x	Power MULTIlight
1 x	Parachute PV6 for F3J
1 x	Wing OXY 0,5 pulgadas2
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Double conector with JR adapter and 200 mm extension
1 x	DPS Switch JR/JR
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Ply-Span 450x600/13g Yellow
1 x	Oracover Brown 2 m
1 x	SERVO DES 707 BB MG, Pignons
1 x	Carbon fiber flat 1000x3.0x0.5 mm
2 x	GameCommander USB Universal
1 x	PPS-4D Propeller
1 x	Crystal Universal RX 35.130 Ch 73
1 x	Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x	Fibreglass-Spinner BS ∅155 x 200 mm
1 x	Actuator Electric 25 mm HIGH TORQUE
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Quick hose connector 4-4 mm
1 x	Interface Jack Adapter IKARUS
1 x	Polyurethan FESTO hose 3x0,5 mm, transparent
1 x	Crystal Universal RX 35.120 Ch 72
1 x	Crystal Universal RX 35.140 Ch 74
1 x	Micro Crystal RX 35.120 Ch 72
1 x	Hovercraft sailcloth
1 x	Micro Crystal RX 35.010 Ch 61
1 x	460 mm EPP Floats
1 x	Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x	Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x	Spinner NUT M5
1 x	Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x	Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x	Spinner NUT M4
1 x	Spinner NUT M8x1,25
1 x	Ferrita con funda
1 x	Actuator Electric 25 mm
2 x	Motor OS 3820-1200 electric
1 x	KIRA 480-38 5,2:1
1 x	CM-3
1 x	JETImodel Addcap 1640
1 x	KIRA 400-39 5,2:1
1 x	6 mm M3 variable horn
1 x	Fiberglass motor-holder for electric motors
1 x	Fan for A60
1 x	Fiberglass motor-holder for electric motors
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	KIRA FAI 5F5/4s
1 x	KIRA 480-26 5,2:1
1 x	KIRA 480-34
1 x	KIRA 600-22 6,7:1
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	KIRA 600-16
1 x	PYRO 650-53L EJE LARGO
1 x	Futaba 54 mm servo arm with ball link
1 x	KONDOR 15-92
1 x	PYRO 700-45
1 x	KIRA 600-20 6,7:1
1 x	KIRA 500-26 6,7:1
1 x	Motor Scorpion HKIII 4035-560 Kv
1 x	PYRO 900-52L
1 x	Motor OS 37 SZ-H
1 x	Motor mount for 1200 mm models
1 x	Motor mount M

10,776.23EUR