419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension silicona 30 cm hembra (Futaba)
1 x	Prolongador S-Bus 1-2 silicona 120 cm
1 x	Prolongador Futaba 100 cm Ø 0,35 mm
1 x	Prolongador silicona 10 cm (Futaba)
1 x	Prolongador Futaba hembra 40 cm de silicona
1 x	Prolongador JR/Graupner hembra 40 cm de silicona
1 x	Cable silicona "Y" 30 cm (Graupner)
1 x	Prolongador silicona 100 cm (Graupner)
1 x	Prolongador silicona 25 cm (Graupner)
3 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Prolongador 100 cm (Futaba)
1 x	Prolongador silicona 75 cm (Graupner)
1 x	Extension silicona 30 cm hembra (Graupner)
1 x	Cable silicona "Y" 30 cm (Futaba)
1 x	Prolongador silicona 50 cm (Graupner)
1 x	Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x	Circlick seguridad
1 x	Prolongador S-Bus 1-2 silicona 30 cm
1 x	Prolongador silicona 100 cm (Futaba)
1 x	Prolongador silicona 35 cm (Futaba)
1 x	Prolongador silicona 75 cm (Futaba)
1 x	Prolongador silicona 25 cm (Futaba)
1 x	Prolongador silicona 50 cm (Futaba)
3 x	Varilla carbono 0.5 mmx1000 mm
1 x	Varilla carbono 2.5 mmx1000 mm
2 x	Varilla carbono 5.0 mmx1000 mm
1 x	Bayoneta de carbono cuadrada 5x5x220 mm
2 x	Varilla carbono plana 1000x6.0x0.8 mm
2 x	Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x	Varilla carbono 10 mm x 1000 mm
1 x	Varilla carbono 1.5 mm x 2000 mm
1 x	Varilla carbono 7.0 mmx1000 mm
2 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Varilla carbono plana 1000x3.0x0.13 mm
1 x	Varilla carbono 6.0 mmx1000 mm
1 x	Varilla carbono 1.0 mm x 1000 mm
2 x	Varilla carbono 16 mm x 1000 mm
2 x	Varilla carbono 2.0 mmx1000 mm
2 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
3 x	Varilla carbono 0.8 mmx1000 mm
1 x	Corona pequeña autoarranque DLE-170M
1 x	Motor DLE 170 M - Paramotores
1 x	Motor DLE 200cc Premium Muffler
1 x	Silent-blocks DLE 170M
2 x	Brazo direccional 16 mm Ø 3 mm
1 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
2 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Cierre de plástico para cabinas
1 x	Cable acero trenzado Ø 0,5 mm (2 m)
1 x	Cierre cabina aluminio Ø4, I=10 mm
2 x	Abrazadera 2.5x100 (20 uds)
2 x	Aero frenos eléctricos para veleros 250 mm (2 pcs)
1 x	Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
1 x	Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
2 x	Cierre cabina tipo FOX MDM1 4m (1 par)
2 x	Cierre cabina
2 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Cierre cubiertas o carenados
2 x	Abrazadera 3.2x142 (20 uds)
2 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
2 x	Cable acero trenzado Ø 0,5 mm (10 m)
1 x	Cierre cabina "One touch"
2 x	Cable acero trenzado Ø 1,3 mm (10 m)
1 x	Carro remolque para veleros 720 x 285 mm
2 x	Medidor angulos tamaño pequeño
1 x	Carro remolque para veleros 720 x 239 mm
1 x	Equilibrador hélices
2 x	Medidor ángulos
1 x	Medidor de incidencias
2 x	Soporte para aviones SebArt
1 x	Soporte para aviones
1 x	Soporte WingFix ULTRA BE
2 x	Medidor angulos y/o incidencias
1 x	Hélice POWER-PROP 13x9 Izda
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Helice FALCON 20x9 carbono-gas
1 x	Hélice POWER-PROP 14x9 Izda
1 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Tubo ABS 8,0x6,0x1000 mm
1 x	Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x	Extension silicona 30 cm macho (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
3 x	Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x	Shaft sleeve LAMA
1 x	Kit de conversión HIROBO EX/EAGLE elektro
1 x	Actuador lineal HLS12-100210-7.4v
2 x	Varilla carbono plana 1000 x 5.0 x 1.0 mm
3 x	Varilla carbono 3.0 mm x 1000 mm
1 x	Varilla carbono plana 1000x3.0x1.0 mm
2 x	Cristal Universal RX 35.140 Ch 74
1 x	Cristal de Emisora 35 Mc/s Ch 62
1 x	Cristal Universal RX 35.070 Ch 67
1 x	Cristal TX 35.180 Ch 78
1 x	Bancada motor clase 48"
1 x	Cristal Universal RX 35.030 Ch 63
1 x	Varilla mando doble roscada aluminio M3 100 mm (2 pcs)
2 x	Motor KAVAN PRO 2225-1600
1 x	Varilla mando doble roscada aluminio M3 60 mm (2 pcs) knurled
1 x	Conjunto bieleta 140 mm y rótulas T. para dirección
2 x	Prisionero aluminio 6 mm Ø (4 uds)
2 x	Taco goma 11 mm (14 pcs)
1 x	Prisionero allen M3x3
1 x	Brazo direccional 16 mm Ø 4 mm
1 x	Salida para cables 28x5 mm (2 pcs)
1 x	Acoplador de aluminio para tubo de carbono 6/M4
2 x	Prisionero aluminio 3.5 mm Ø (4 uds)
1 x	Prisionero allen M4x4
1 x	Transmision funda/varilla octog. plastica 3/2 porta kwik link M2
1 x	Varilla mando doble roscada aluminio M2,5 30 mm (2 pcs)
1 x	Transmision funda/varilla greyline plastica 3/2 kwik link M3 100
1 x	Pasacable de goma 9.5 mm (4 uds)
2 x	Cierre cabina V1 M3 Azul (2 pcs)
1 x	Prisionero allen M3x5
1 x	Prisionero aluminio 2.5 mm Ø (4 uds)
1 x	Anclaje cabina en L "tipo F3A" (2 pcs)
1 x	Conjunto bieleta 140 mm para dirección
1 x	Sistema salvaservos rueda delantera BIDULE 111
2 x	Varilla carbono plana 1000x3.0x0.5 mm
1 x	Tubo ABS 6,0x4,0x1000 mm
1 x	Tubo ABS 5,0x4,0x1000 mm
1 x	Tubo ABS 7,0x5,0x1000 mm
1 x	Tubo ABS 10,0x8,0x1000 mm
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Sistema cierre 200 mm con abrazadera (2 pcs)
1 x	Cinta RUDDOG proteccion calor 2m x 50 mm
1 x	Sistema cierre 360 mm con abrazadera (2 pcs)
1 x	X-RAY Micro QR (Fuselaje con canopy)
1 x	BABY planeador (Aero-naut)
1 x	Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Cargador TA1200
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Conector macho bateria 1s Kavan/Walkera 10cm cable
1 x	Conector banana oro 3 mm
1 x	Conector FUTABA Servo hembra BLUE silicon (10 pcs)
1 x	Brazo servo aluminio 15-10 mm Futaba/MKS/Savox
1 x	Brazo de servo 50 mm con rodamiento (2 pcs)
1 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Varilla carbono 20 mmx1000 mm
1 x	Tubo ABS 2,0x1,0x1000 mm
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Conector banana oro 2,5 mm (pareja)
1 x	Conector CAN 15
1 x	Conector JAPAN G2 Set 5 pares
1 x	Conector JR Servo hembra (10 pcs)
1 x	Conector XT-30 (macho)
1 x	Conector banana oro 2,5 mm (100 parejas)
1 x	Conector JR/Uni Servo hembra BLUE silicon (10 pcs)
1 x	Brazo servo aluminio 15-10 mm HITEC
1 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Conector JR Servo macho (10 pcs)
1 x	Conector banana oro 4 mm (Ultralight)
1 x	Conector banana oro 2 mm
1 x	Conector JR/Uni Servo macho BLUE silicon (10 pcs)
1 x	Conector BEC hembra (10 pcs)
1 x	Conector DEANS hembra 30 cm
1 x	Conector MR-60 (pareja)
1 x	Brazo servo aluminio 20-25 mm Futaba/MKS/Savox
1 x	Conector banana oro 4 mm
1 x	Conector JR Servo hembra (10 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Conector FUTABA Servo macho BLUE silicon (10 pcs)
1 x	Conector MULTIPLEX hembra 30 cm
1 x	Conector MT-60 (pareja)
1 x	Conector banana oro 5,5 mm
1 x	Conector JR Servo hembra (50 pcs)
1 x	Cristal de Emisora 35 Mc/s Ch 77
1 x	Cristal de Receptor 35 Mc/s Ch 62
1 x	Cristal TX 35.050 Ch 65
1 x	Motor Mega AC 16/25/04 COMBAT
1 x	Motor Mega AC 16/35/01
1 x	Motor Mega AC 16/15/04 COMBAT
1 x	Conjunto bieleta 90 mm y rótulas T. para dirección
1 x	Motor OS 105 HZ-R con pipa 105

9,198.30EUR