Top » Catalog » O.S. » OSGT154040

419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x USB Mini Camera endoscope
1 x 800TVL CMOS camera for FPV
1 x Circlick securite
2 x 2 LiPo XH>EH adapter
1 x Futaba External voltage input cable Futaba CA-RVIN-700
2 x Copper lacquer wire Ø0,2 mm (5 m)
1 x USB HLS prog. interface
1 x Cabel charger transmitter GRAUPNER
2 x Dean "T" - Futaba Adapter
1 x 30 cm BEC cable (female)
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x TP/TopFuel - XH 2/3S Adapter
1 x TrainerCord (master-learner)
1 x Adapter lead MPX/EC3
2 x Carbon fiber flat 1000x3.0x0.13 mm
2 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Field folding model stand
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Propeller balancer
1 x Surface Indicator Gauge Small
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Truck-trailer for gliders 720 x 239 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Angle measurer
1 x Propeller balancer
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
2 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Ball link M3 (10 pcs, flat ball)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Horn 5/10 with M2 Bearing
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Support pumb/filter Xicoy X45
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Female connector for 12 pines AWG
1 x Connector Sub-D 2+5 Male
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x SPS 70V 140/280 A
1 x Magnetic Interruptor MULTIPLEX
1 x Interruptor RX/Batterie
1 x DPS Switch JR/JR
1 x MAX BEC 2
1 x SPS Remote switch actuator
1 x Long Switch On/Off micro
1 x Extension 2/3 lipos JST/C
1 x Male connector for 6 pines AWG
1 x Connector CAN 15
1 x MAX BEC 2D plus EX
1 x Interruptor SPS 70v 60/120A
1 x SBEC 40
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x PWC4 wing/fuselage connector for 4 servos
1 x Micro Switch button
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x PowerBox SparkSwitch RS
1 x USB interface ALTIS
1 x Opto Gas Engine Kill Switch
1 x SPARK Switch 7.4v
1 x JETImodel Addcap 1640
1 x Connector Sub-D 2+5 Female
1 x Hacker X-Pro USB interface V2
1 x Male connector for 20 pines AWG
1 x 3 LiPo XH>EH adapter
1 x SPARK Switch 12v
1 x Extension 6 lipos XH > EH
1 x Fox 4000 mm (Airwold)
1 x Electric spoiler 300 mm (2 pcs)
1 x LS-8 GFK 6m Glider
1 x X-RAY Micro QR
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x X-RAY Micro QR (Rudder)
2 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Film release agent PVA 25 ml
1 x Styrene plate 320x120x0.5 mm
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x ASW 20 5000 mm with winglets (Airwold)
1 x ASW 15 5000 mm (Airwold)
1 x Fox 4000 mm with flaps (Airwold)
1 x LIBELLE Standard 3.8m D-box H-201
1 x Chili F3K 2 wing servo mounted
1 x UHU Por 50ml/40g
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x Glass Bubbles (0,12 g) 350 ml
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x FOXY G2 C3530-700
1 x Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x ESC RAY G2 R-60SB SBEC
1 x Lipo RAY 2200 mAh 2s 7.4v 30C
1 x JETImodel SINGLE BEC
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x Switc electronic 30 Amp
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x SAGITA Alsema 4.0 m
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x OPUS-V / Jet-CC-BF
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x 50N turbine start protection tube
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Vacuum bag, 1200 mm x 50 m
1 x Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear
25,922.56EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies