419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x	Bisagra pin 26x11 mm (10 uds)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
2 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
2 x	Bisagra de nylon 20x15x0,3 (10 pcs)
2 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra de Flaps (6 uds)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
1 x	Bisagra 18 mm reforzada
1 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	Bisagra de compuerta aluminio (1 pcs)
2 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Bisagra 25 mm reforzada
2 x	Bisagra de nylon 15x0,3 (10 pcs)
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
1 x	Bisagra Micro flexible (12 uds)
1 x	Set bisagras indoor con horns integrados
2 x	Bisagra 15 mm reforzada
2 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x	Bisagra papel lite CA (12 uds)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Bisagra de compuerta/Flaps
1 x	Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
2 x	Bisagra PIN mediana (12 uds)
2 x	Bisagra PIN 4.7 mm (5 pcs)
1 x	Bisagra Pequeña flexible (12 uds)
1 x	Varilla carbono 1.5 mm x 1000 mm
2 x	Varilla carbono plana 1000x6.0x0.8 mm
2 x	Varilla carbono 14 mmx1000 mm
1 x	Varilla carbono 5.0 mmx1000 mm
1 x	Varilla carbono plana 1000x3.0x0.13 mm
1 x	Varilla carbono plana 1000x3.0x0.5 mm
2 x	Varilla carbono 7.0 mmx1000 mm
2 x	Bayoneta de carbono cuadrada 5x5x220 mm
2 x	Varilla carbono 3.0 mm x 1000 mm
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
2 x	Varilla carbono 4.0 mmx1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Varilla carbono 6.0 mmx1000 mm
2 x	Varilla carbono 16 mm x 1000 mm
1 x	Varilla carbono 2.0 mmx1000 mm
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x	Varilla carbono plana 1000 x 5.0 x 1.0 mm
1 x	Oracover Negro 10 m
2 x	Oracover Negro 2 m
1 x	Ply-Span 450x600/13g Naranja
1 x	Oratex Antik 2m
1 x	Oracover Amarillo CADMIO 10 m
1 x	Oracover CARBON Metalic 1m
1 x	Oracover Marrón 2 m
1 x	Oracover CHROME 2m
1 x	Papel seda japones 12 grs/m2 760x510 mm JAPICO
2 x	Oratex Red Fokker 10 m
1 x	Ply-Span 450x600/13g Amarillo
2 x	Oracover Gris claro 2m
1 x	Oracover Amarillo CUB 10 m
1 x	Ply-Span 450x600/13g Azul
1 x	Cable servo PVC 0,14 mm2 Hitec/Mpx (5 m)
1 x	Prolongador cable servo POWERBOX 100cm
1 x	Cable silicona "Y" 30 cm (Graupner)
1 x	Prisionero aluminio 6 mm Ø (4 uds)
1 x	Cartuchos de humo AX-18 blanco (5 pcs)
2 x	Soporte conector MPX (6 pcs)
1 x	Soporte FUEL DOT V3
1 x	Piloto 1/12 "Cougar"
1 x	Piloto 1/10 "Jimmy"
1 x	Rueda Jets 101x28 (4.0") centro aluminio
1 x	Piloto 1/4 "Heidi"
1 x	Rueda KOVO C SLH 110x55 mm
1 x	Tren carbono de 160 mm (2pcs)
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Adaptador de hélice 3 mm M5 (corto)
1 x	Oracover Amarillo transparente (10 m)
1 x	Termo-retráctil rojo tubo de 1,2x1000 mm 2:1
1 x	Oratex Natural White 20m
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Adaptador 5,0 mm M6 para cono 40 mm hélice fija.
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Ball joint long
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Parte superior del rotor
1 x	Núcleo del buje del rotor
1 x	Tornillo acero M1x8 (10 pcs)
1 x	Parallamas
1 x	Parte inferior del rotor
1 x	Tubo de cola
1 x	Soporte cental de las palas del rotor
1 x	Tornillos M3x16
1 x	Enganche de las palas del rotor
1 x	Bisagra larga con pin metalico (6 uds)
1 x	Soporte conector MPX empotrado (6 pcs)
3 x	Soporte bomba/flitro Xicoy X45
1 x	Soporte Pitot JETI
2 x	Soporte conector MPX enrasado (6 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
2 x	Soporte Filtro FESTO
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Catapulta Vasa model
2 x	Varilla carbono 10 mm x 1000 mm
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x	Bisagra pin 39x20 mm (10 uds)
1 x	Bisagra pequeña con pin metalico (6 uds)
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 76 mm (10 pcs)
1 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
1 x	Bisagra pin 34x16 mm (10 uds)
1 x	Bungee HLG Premium
1 x	PVC termo-retráctil batería 45 mm negro transparente (1 m)
1 x	PVC termo-retráctil batería 68 mm rojo (10 m)
1 x	Ply-Span 450x600/13g Blanco
1 x	Cono aluminio autoventilado helice pleg. 30 mm dia./eje 3.17 mm
1 x	Cono hélice plegable 40 mm diámetro / eje 4,0 mm
1 x	Cono autoventilado hélice plegable 30 mm diámetro / eje 4,0 mm
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 3.2 mm
1 x	Cono 82 mm aluminio
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Plancha contrachapado Abedul 600x300x4,0 mm
1 x	Listón de HAYA redondo 10 mm x 1000 mm
1 x	Tuerca autoempotrable M8 (10 pcs)
1 x	Varilla carbono 2.5 mmx1000 mm
1 x	Rueda 89x32 (3.5") centro aluminio eje Ø5 mm
1 x	Plancha contrachapado Abedul 600x300x3,0 mm
1 x	Cono aluminio autoventilado helice pleg. 34 mm dia./eje 3 mm
1 x	Cono INO de 89mm (Imitacion carbono)
1 x	Tuerca autoempotrable M2 (10 pcs)
1 x	Prolong/Adap correa Futaba 12-14C
1 x	Cable "Y" 15 cm
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x	AC-10 pre-rotacion + motor
1 x	Cono aluminio autoventilado hélice pleg. 40 mm dia./eje 5 mm
1 x	Cono aluminio autoventilado helice pleg. 30 mm dia./eje 5.0 mm
1 x	Cable video GoPro
1 x	Hélice MEJZLIK 20x13 Electric light (41 g)
1 x	Emisora Cadet 4Ch (V3) 2,4 GHz Mod.2
1 x	SIMtransmitter 6 Modo 2
1 x	Soporte filtro FESTO (4 pcs)
1 x	PVC termo-retráctil batería 105 mm transparente (1 m)
1 x	Cono negro 40 mm (recambio)
1 x	Cono hélice plegable 40 mm diámetro / eje 3,0 mm
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 3,0 mm
1 x	Cono aluminio hélice pleg. 30 mm diámetro / eje 3,0 mm
1 x	Cono aluminio hélice pleg. 40 mm diámetro / eje 3,0 mm
1 x	Motor XPower F2915/12 XLight

3,633.66EUR