419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Pegatinas números para marcar
2 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
2 x	DINAMOETRO S-1580
1 x	Sensor RPM Optico para Dinamometro
1 x	Bayoneta aluminio/strongal D25 mm/1 m
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Listón de TILO 2,0x2,0x1000 mm
1 x	Listón triangular de BALSA 6x6x1000 mm
1 x	GameCommander USB Universal
1 x	Listón de PINO 2,0x2,0x1000 mm
1 x	Liston de BALSA 6,0x6,0x1000 mm
1 x	Simulador RealFlight RF-9 Interlink-X (con emisora)
1 x	Liston HAYA 3 x 10 x 1000 mm
3 x	SIMtransmitter 6 Modo 2
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Listón de CAOBA 1,5x1,5x1000 mm
1 x	Listón OBECHI 2,0x3,0x1000 mm
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Perfil de ABS de media caña 3x1000 mm
2 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Perfil Acero Inox. 6.3x3.5x1000 mm
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
2 x	Perfil de ABS cuadrado 4 x 1000 mm
2 x	Perfil de ABS "T" 8.0x8.0x1000 mm
1 x	Canal de ABS de 1,0x2,0x1000 mm
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	Cinta Roving carbono 20m
2 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Bolsa vacio 1200 mm x 50 m
2 x	Fibra carbono tela 160g/m2 100 cm x 2 m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Varilla carbono 16 mm x 1000 mm
1 x	Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Paracaidas rescate "RC-Evo-Cross"
1 x	Espuma expulsión paracaídas
1 x	Instrumentos individuales 1/4 Planeador
1 x	Piloto 1/4 "Heidi"
1 x	Liston ABS I 3,5x1,75x330 mm
1 x	Varilla ABS 2,5x1000 mm
1 x	Liston ABS I 10x5x1000 mm
1 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Plancha contrachapado Abedul 600x300x6,0 mm
1 x	Listón de CAOBA 2,0x2,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x1,2 mm
1 x	Listón de PINO 2,0x10,0x1000 mm
1 x	Plancha carbono 550x350x1.0 mm ECOTECH
1 x	Plancha contrachapado "Economy" 600x300x6,0 mm
2 x	Plancha contrachapado Abedul 600x300x3,0 mm
3 x	Plancha carbono 350x150x3.0 mm
2 x	Controladora de motor individual SyRen 10A 6V-24V
1 x	Perfil de ABS de media caña 5,0x1000 mm
1 x	Perfil goma 6-2 mm 2M
1 x	Conector FESTO "T" 4-4-4 mm
1 x	Medidor de presión del aire
1 x	Pasa muros FESTO 3-3 mm
1 x	Prisionero 2 mm Ø (4 uds)
1 x	Eje ruedas Ø 4 mm (2 uds)
2 x	Anclaje carenado ruedas Ø 5 mm (2 uds)
1 x	Conector FESTO "Y" 6-6-6 mm
1 x	Cilindro de aire 40 mm
2 x	Conector FESTO 4-4mm
1 x	Pletinas nylon medianas anclaje tren aterrizaje (4 uds)
1 x	Fail Safe air retract
1 x	Grifo FESTO 4-4 mm
1 x	Conector FESTO "T" 3-3-3mm
1 x	Brazo de servo agujero 5 mm para FEMA 9810A
1 x	Cuerpo para tren aterrizaje Ø 3 mm
1 x	Conector FESTO "Y" 4-4-4 mm
1 x	Cuerpo para tren aterrizaje Ø 4 mm
1 x	Conector FESTO 3-3mm
1 x	Batería Sanyo Eneloop RX 4,8 V JR
1 x	Batería Eneloop RX 6,0 V JR 2500 mAh
1 x	Batería Sanyo Eneloop RX 4,0 V AAA JR
1 x	Conector FESTO "T" 6-6-6 mm
1 x	Anclaje carenado ruedas Ø 3 mm (2 uds)
1 x	Perfil de ABS de media caña 6,0x1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Perfil Acero Inox. 9.0x5.0x1000 mm
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
1 x	Canal de ABS de 5,0x10,0x1000 mm
1 x	Manga de fibra de vidrio Ø 20 mm x 10m
1 x	Fibra carbono tela 245g/m2 127 cm x 10m
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Plancha fibra vidrio 350x150x1.5 mm
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 50m
1 x	Manga de fibra de vidrio Ø 20 mm x 20m
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Fibra vidrio 280 g/m2 (Twill weave) 50m x 1m
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Plancha de goma espuma (310x210x5 mm)
1 x	Fibra de vidrio 163 g/m² 1 m x 5 m (Twill)
1 x	Hélice plegable CAM-Carbon 11x6
1 x	Hoja de sandwich de fibra de carbono 350x150x3 mm
1 x	Plancha ABS 500 x 400 x 0,5 mm (blanca)
1 x	Bateria LiFe 2100 mAh 3s 25C
1 x	Cargador iCharger 4010 Duo
1 x	Perfil de ABS de media caña 7,0x1000 mm
1 x	Carburador OS (Type 40K) 46AXII
1 x	Brazo de servo agujero 6 mm para FEMA 9800A
1 x	Racor "Y" 3 mm
1 x	KIRA 600-16
1 x	Conector FESTO "Y" 3mm
1 x	Adaptador 4 LiPos XH>EH
1 x	PVC termo-retráctil batería 135 mm transparente (1 m)
1 x	Termo-retráctil rojo tubo de 3,2x1000 mm 2:1
1 x	Termo-retráctil rojo tubo de 1,6x1000 mm 2:1
1 x	Termo-retráctil negro tubo de 1,2x1000 mm 2:1
1 x	PVC termo-retráctil batería 58 mm transparente (1 m)
1 x	Termo-retráctil verde tubo de 2,4x1000 mm 2:1
1 x	Destornillador allen 2,0x50 mm molibdeno
1 x	AXI 2814/16 V2
1 x	AXI 2820/14 V2 Eje largo
1 x	Bomba KP500V Kingtech
1 x	Modulo telemetria KingTech 5 en 1
1 x	Bateria LiFe 3000 mAh 3s 25C
1 x	Turbina KINGTECH K180 G4+
1 x	Peel Ply liso 95 g/m2 20 mm x 100 m
1 x	Manga de fibra de vidrio Ø 20 mm x 5m
1 x	Escape turboProp K45TP
1 x	Peel Ply liso 93 g/m2 150 cm x 5 m
1 x	Perfil goma 8-2 mm 2M
1 x	KIRA 480-43 5,2:1
1 x	PYRO 800-40 Eje Largo
1 x	Conector FESTO "Y" 4mm
1 x	Captador OS GT 33 cc
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	PYRO 900-52L
1 x	Prisionero 4 mm Ø (4 uds)

12,813.61EUR