419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Hélice POWER-PROP 13x9
1 x Helice FALCON 20x9 carbono-gas
1 x Hélice POWER-PROP 13x9 Izda
1 x DUPLEX 2.4EX Central Box 210
1 x EDGE 540 V3 (Superlite) ORANGE
1 x EDGE XL Orange
1 x Carro remolque JEEMO
1 x Excavadora 966G II Kit completo
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x Astra Bayoneta (Top Model)
1 x Swift ARF 2000 mm Rojo (Hacker Model)
1 x TAKEO 3.6m electric
1 x FANTASY ARF 3.0m, Fundas alas
1 x Astra (Top Model)
1 x Fascination 3600 mm ARC
1 x Surprise XII Estabilizador Horizontal (Freudenthaler)
1 x Regulador MEZON 115 Opto
1 x Motor KAVAN PRO 2225-1600
1 x Bancada servo gancho
1 x Receptor CORE PBR-26XS 26ch
1 x GameCommander USB Universal
1 x PowerBox Mobile Terminal
1 x Tubo ABS 20,0x18,0x1000 mm
1 x Cable de entrenamiento para GWS T4A II (maestro-alumno)
1 x Brazo direccional 16 mm Ø 4 mm
1 x Ferrita con funda
1 x Varilla carbono 0.5 mmx1000 mm
1 x Adaptador MPX-XT60 10cm
1 x Gancho de lanzamiento regulable
1 x Perfil Acero Inox. 6.3x3.5x1000 mm
1 x Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x Borde Salida BALSA 35x8x1000 mm
1 x Varilla acero Ø 8,0 mm x 1000 mm
1 x Oracover Gris claro 2m
1 x Perfil Acero Inox. 19.5x9.8x1000 mm
1 x Listón de NOGAL 1,5x1,5x1000 mm
1 x Perfil de ABS cuadrado 4 x 1000 mm
1 x Adaptador JST-XH
1 x Adaptador TP/TopFuel - XH 2/3S
1 x Abrazadera 3.2x142 (20 uds)
1 x Spray grafito 33
1 x Varilla ABS 6,0x1000 mm
1 x Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x Papel seda japones 12 grs/m2 760x510 mm JAPICO
1 x Conjunto de mandos arriostrados
1 x Barra pegamento caliente Verde
1 x Oratex White 2m
1 x Horn aluminio anodiazado 6 mm azul con rótula
1 x Horn corto de latón M3 para cable (2 pcs)
1 x Oracover CARBON Metalic 1m
1 x Liston ABS 1,0x5,0x1000 mm
1 x Oracover Blanco 10 m
1 x REVOLTO Azul
1 x Horn 20x28,5 mm (2 pcs)
1 x Varilla ABS 1,25x1000 mm
1 x Ply-Span 450x600/13g Azul
1 x Copiador 2 unidades de 20 cm
1 x Medidor de incidencias
1 x Arrancador 12v (Max 180 and 30ccm)
1 x Extintor CO2 - 2 Kg
1 x Acople ALU M2,5 Ø 4 (2 uds)
1 x Helice PT 21x13 EL
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Hélice Electric Carbon 8.5x7
1 x Hélice Electric Carbon 7x7
1 x Helice APC 11x3.8 SF
1 x Helice APC 10x6 Electric Pusher
1 x Helice APC 11x7 SF
1 x Pasta soldar 100g
1 x Hélice 28x12 Super Silence
1 x Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x Junta metálica 3 mm para codo/cilindro DA-35 y DA-75
1 x Electrodos de plata 55% (2 pcs)
1 x Helice 24x10 Super Silence
1 x Fundas para el transporte clase 30 (SebART)
1 x Avanti S, Funda cabina (SebART)
1 x Funda cobertora clase 50 (SebART)
1 x Motor Mega AC 16/15/07
1 x Helice FIALA 27x10
1 x AXI 2826/8 V2 Eje largo
1 x FesEx-Uni6 System
1 x Prolongador 100 cm (Futaba)
1 x Plancha contrachapado "Economy" 600x300x6,0 mm
1 x Acoplador de aluminio para tubo de carbono 6/M4
1 x Plancha contrachapado Abedul 600x300x3,0 mm
1 x Prolongador 30 cm (Futaba)
1 x Prolongador silicona 10 cm (Futaba)
1 x Listón triangular de BALSA 10x10x1000 mm
1 x Listón de BALSA 3,0x3,0x1000 mm
1 x Plancha contrachapado Abedul 1520x750x3,0 mm
1 x Soporte para aviones SebArt
1 x Monokote AZUL metalizado (1.8x0.65m)
1 x Conector alas/fuselaje para 3 pines AWG 20-22
1 x Simulador del Quemador NF-Jet3 RYS
1 x Interface REVOLECTRIX USB para CellPRO 10s
1 x NF-3X-80 liner Kit
1 x Interruptor OPTO Gas Engine
1 x Termo-retráctil azul tubo de 6,4x1000 mm 2:1
1 x Frenos Cuchillo 250 mm / 16 mm
1 x Cono Aluminio hélice fija 40 mm diámetro / eje 5,0 mm
1 x Hélice 9x4,7 SlowFlyer
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Cono Aluminio hélice fija 30 mm diámetro / eje 3,0 mm
1 x Hélice 3x2
1 x Hélice POWER-PROP 12x6
1 x Hélice POWER-PROP 11x6
1 x Helice APC 10x7 Glow/Gas
1 x Helice APC 12x10 Electric
1 x ZEUS F3A 2m
1 x HAWKER HUNTER 1:5,8, Tren retractil electrico
1 x F-16 Falcon Black Knights 1:6 (1630 mm)
1 x F9F COUGAR Grey ARF 1.562 mm
1 x Tubo escape flexible acero inox. Dia.25 mm x 50 cm
1 x Hélice tripala 20x12 carbono Super Silence
1 x Helice 22x10 Super Silence
1 x Depósito de gasolina de 500 ccm completo
1 x Depósito de gasolina de 500 ccm
1 x Hélice tripala 29x12 carbono Super Silence
1 x Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
1 x Hélice tripala 20x10 carbono Super Silence
1 x Funda cobertora clase 110/120/140 (SebART)
1 x Funda cobertora clase 2.2 (SebART)
1 x Katana S 30E AMARILLO/NEGRO, Carena motor(SebART)
1 x Sebart 30E AMARILLO/NEGRO, Cabina (SebART)
1 x Sukhoi 29S - 2,2 m, Carena del motor amarilla (SebART)
1 x KatanaS 50E, Tren de aterrizaje BLANCO (SebART)
1 x Clase 30, Carena ruedas rojas (SebART)
1 x SEBART 50E V2, Carena ruedas white (SebART)
1 x KatanaS 50E, Alas BLANCO/ROJO (SebART)
1 x KatanaS 30E Tren de Aterrizaje BLANCO (SebART)
1 x Funda cobertora clase 2.6 (SebART)
1 x Sukhoi 29S 50E V2, Carena Motor roja (SebART)
1 x Fundas para el transporte clase 50 (SebART)
1 x Motor OS MAX 120 AX
1 x Motor Mega AC 16/15/07 COMBAT
1 x Motor Mega AC 22/35 4S
1 x Helice APC 11x5.5 Electric Pusher
20,304.83EUR
Fabricantes
Información del Fabricante
O.S.
O.S. Página Principal
Otros productos
Idiomas
Español English
Monedas