419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Cono hélice fija 42 mm diámetro / eje 5,0 mm
2 x	Cono hélice fija 60 mm diámetro / eje 5,0 mm
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Horn de mando 5/15 con rótula M2
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Horn corto de latón M4 para cable (10 pcs)
1 x	Varilla carbono 0.5 mmx1000 mm
2 x	Varilla carbono plana 1000x6.0x0.8 mm
2 x	Horn de mando 6/27 con rótula M3
1 x	Varilla carbono 14 mmx1000 mm
1 x	Varilla carbono plana 1000x3.0x1.0 mm
1 x	Conjunto de mandos arriostrados
1 x	Varilla carbono 2.0 mmx1000 mm
1 x	Varilla carbono 4.0 mmx1000 mm
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Horn con ball 40x30
1 x	Varilla carbono plana 1000x3.0x0.5 mm
1 x	Varilla carbono 5.0 mmx1000 mm
1 x	Cable con accesorios
1 x	Horn 16,5x20 mm (2 pcs)
2 x	Varilla carbono 7.0 mmx1000 mm
1 x	Horn corto de latón M3 para cable (2 pcs)
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Horn de mando carbono 20 mm
1 x	Varilla carbono 20 mmx1000 mm
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Varilla carbono 8.0 mmx1000 mm
1 x	Varilla carbono 12 mm x 1000 mm
2 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Horn aluminio RH largo (2pcs)
1 x	Varilla carbono 1.5 mm x 2000 mm
1 x	Varilla carbono plana 1000 x 5.0 x 1.0 mm
1 x	Horn control flaps (1 pcs)
2 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Horn de mando 5/10 con rótula M2
1 x	Varilla carbono 10 mm x 1000 mm
1 x	Horn corto de latón M4 para cable (4 pcs)
2 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn de mando 6/20 con rótula M3
1 x	Varilla carbono plana 1000x3.0x0.13 mm
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Tubo acero (L 1000 mm, Ø3 mm, Ø2,7 mm)
2 x	Tubo ABS 4,0x3,0x1000 mm
2 x	Tubo ABS 4,0x2,0x1000 mm
1 x	Tubo ABS 9,0x7,0x1000 mm
2 x	Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Tubo aluminio (L 1000 mm, Ø5,0 mm, Ø4,1 mm)
2 x	Tubo aluminio (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
2 x	Tubo ABS 7,0x6,0x1000 mm
2 x	Tubo ABS 5,0x4,0x1000 mm
2 x	Tubo ABS 18,0x16,0x1000 mm
2 x	Tubo ABS 6,0x5,0x1000 mm
1 x	Tubo ABS 12,0x10,0x1000 mm
2 x	Tubo ABS 3,0x1,0x1000 mm
2 x	Tubo ABS 14,0x10,0x1000 mm
1 x	Tubo ABS 6,0x4,0x1000 mm
3 x	Tubo ABS 5,0x3,0x1000 mm
2 x	Tubo acero inox. Dia, 28 mm x 0.6 x 1000 mm
2 x	Tubo acero (L 1000 mm, Ø12 mm, Ø11,7 mm)
2 x	Tubo acero (L 1000 mm, Ø7 mm, Ø6,7 mm)
1 x	Tubo ABS 10,0x8,0x1000 mm
2 x	Tubo ABS 3,0x2,0x330 mm
1 x	Tubo ABS 8,0x7,0x1000 mm
1 x	Tubo ABS 20,0x18,0x1000 mm
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Paracaidista
1 x	Cartuchos de humo AX-18 blanco (5 pcs)
1 x	Sistema remoto de ignición eléctrica
1 x	Aceite para hacer humo 3l Smoke
2 x	Cartuchos de humo AX-60 mezclados (5 pcs)
1 x	Cartucho de humo Blanco 100 g
1 x	Cartucho de humo Blanco 140 g
2 x	Cartuchos de humo AX-60 blanco (5 pcs)
1 x	PCARD sistema wireless
1 x	Cartucho de humo Blanco 65 g
1 x	Espuma expulsión paracaídas
1 x	Cartuchos de humo AX-60 rojo (5 pcs)
1 x	Cartuchos de humo AX-60 negro (5 pcs)
2 x	Cartucho de humo Amarillo 65 g
1 x	Cartucho de humo Rojo 100 g
1 x	Cartucho de humo Azul 100 g
2 x	Set de Humo "S"
1 x	Cartucho de humo Amarillo 100 g
1 x	Cartucho de humo Amarillo 140 g
1 x	Soporte ventral para AX-18/AX-60
1 x	Set de Humo "M"
1 x	Kit de montaje "S" para avión
1 x	Cartuchos de humo AX-9 blanco (10 pcs)
1 x	Iniciadores eléctricos cohetes (6 pcs)
1 x	Cartucho de humo Rojo 65 g
1 x	Kit de montaje "S" para barco
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x	Piloto 1/12 "Langley"
1 x	Bisagra 18 mm reforzada
1 x	Sistema cierre 360 mm con abrazadera (2 pcs)
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Cono INO 63 mm Chrome (Imitacion metal)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Varilla carbono 6.0 mmx1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
2 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Horn 13,5x16 mm (2 pcs)
2 x	Varilla carbono 1.5 mm x 1000 mm
2 x	Horn largo de latón M2 para cable (10 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Horn micro (2 pcs)
1 x	Horn mando small (2 pcs)
1 x	Horn de mando 6/35 con rótula M3
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
2 x	Tubo carbono (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Tubo carbono 3K-PW (Ø19 mm, Ø15 mm L:1000 mm)
1 x	Tubo carbono (L1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Tubo de latón (L 1000 mm, Ø18,0 mm, Ø16,0 mm
1 x	Tubo aluminio (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
2 x	Tubo ABS 16,0x14,0x1000 mm
1 x	Tubo carbono (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Tubo carbono (L 1000 mm, Ø22 mm, Ø21 mm)
2 x	Motor OS 3820-1200 eléctrico
1 x	Tubo carbono (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Tubo acero (L 1000 mm, Ø9 mm, Ø8,7 mm)
1 x	Tubo carbono (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Tubo carbono 3K-PW (Ø14 mm, Ø12 mm L:1000 mm)
1 x	Tubo acero (L 1000 mm, Ø6 mm, Ø5,7 mm)
1 x	Prolongador cable servo POWERBOX 75cm
1 x	Prolongador Futaba 100 cm Ø 0,35 mm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension silicona 30 cm macho (Graupner)
1 x	Cable silicona hembra batt. receptor 30 cm (Futaba)
2 x	Brazo servo redondo 30 mm Futaba
1 x	Chaqueta Hispano Aviación
2 x	Tubo carbono 3K-PW (Ø12 mm, Ø10 mm L:2000 mm)
1 x	Tubo carbono (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Tubo carbono (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Tubo de latón (L 1000 mm, Ø5,0 mm, Ø4,1 mm)
2 x	Tubo carbono (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Tubo acero (L 1000 mm, Ø8 mm, Ø7,7 mm)
1 x	Tubo de latón (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Tubo carbono (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Tubo carbono (L 1000 mm, Ø5 mm, Ø3 mm)
2 x	Tubo ABS 2,0x1,0x1000 mm
1 x	Tubo ABS 9,0x8,0x1000 mm
2 x	Tubo carbono 3K-PW (Ø18 mm, Ø16 mm L:1000 mm)
1 x	Tubo de latón (L 1000 mm, Ø14,0 mm, Ø12,0 mm)
1 x	Tubo carbono (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Tubo de latón (L 1000 mm, Ø10,0 mm, Ø9,1 mm)
1 x	Tubo carbono (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Tubo carbono (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Tubo carbono (L 1000 mm, Ø0,7 mm, Ø0,3 mm)
1 x	Cargas cohete B4-0 (6 pcs)
1 x	Set de Humo "Planeador"
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Tubo carbono 3K-PW (Ø20 mm, Ø18 mm L:2000 mm)
1 x	Cartucho de humo Verde 140 g
1 x	Tubo fiberglass 6.0 / 4.0 x 1000 mm
1 x	Tubo carbono 3K-PW (Ø20 mm, Ø18 mm L:1000 mm)
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Horn de mando variable 5 mm M2
1 x	Horn largo 50x26
1 x	Horn micro type4 Ø 0,5(2 pcs)
1 x	Horn metálico ajustable rosca M3
1 x	Horn micro T2 Ø 1 (2 uds)
1 x	Horn largo de latón M2 para cable (2 pcs)
1 x	Horn DUBRO 1/2A
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Horn largo de latón M4 para cable (4 pcs)
1 x	Set bisagras indoor con horns integrados
1 x	Prolongador S-Bus 1-2 silicona 30 cm
1 x	LiPo TopFuel RX 800 mAh 2S 25C ECO-X
1 x	Cable S.BUS 3 salidas 300 mm
1 x	LiPo TopFuel ECO-X 5800mAh 2s 20C MTAG
1 x	LiPo TopFuel 2400 mAh 2S 20C-ECO-X MTAG
1 x	Encendido GLOW 2C + accesorios
1 x	Tubo carbono 3K-PW (Ø8 mm, Ø6 mm L:1000 mm)
1 x	Tubo carbono 3K-PW (Ø30 mm, Ø27 mm L:1000 mm)
1 x	Tubo de latón (L 1000 mm, Ø11,0 mm, Ø10,0 mm)
1 x	Conector FESTO M7 Quick 6 mm
2 x	Bisagra de compuerta/Flaps
1 x	Brazo servo 38 mm Futaba
1 x	Brazo servo 25 mm Futaba con rótula M3
1 x	KIRA 600-17
1 x	Tubo carbono 3K-PW (Ø16 mm, Ø14 mm L:1000 mm)
1 x	KIRA 600-20 6,7:1
1 x	Prolongador macho TP 4/5S
1 x	LiPo TopFuel 5000 mAh 3S 20C-ECO-X MTAG
1 x	LiPo TopFuel ECO-X 5000 mAh 3s 20C MTAG
1 x	LiPo TopFuel ECO-X 2400mAh 4s 35C MTAG
1 x	Horn de mando largo ajustable con rodamiento
2 x	Tubo carbono 3K-PW (Ø25 mm, Ø22.5 mm L:1000 mm)
1 x	Tubo de latón (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
2 x	Tubo carbono 3K-PW (Ø40 mm, Ø36 mm L:2000 mm)
1 x	AXI 2820/8 V2
1 x	AXI 2814/20 V2
1 x	Filtro FESTO 6 mm
1 x	Conector FESTO M7 Quick 4mm 90º
1 x	Conector FESTO "T" 3mm
1 x	AXI 2217/20 V2
1 x	Brazo servo doble pull-pull 24/30 mm Futaba con rótulas
1 x	Brazo servo 46 mm Hitec con rótula
1 x	Brazo servo doble pull-pull 14/20 mm Futaba con rótulas
1 x	Brazo servo 30 mm Futaba con rótula M3
1 x	Brazo servo 17 mm con rótula FUTABA
1 x	Brazo servo 17 mm con rótula DES Graupner
1 x	Brazo servo 25 mm Hitec con rótula M3
1 x	Brazo Servo XTorque 38 mm DES
1 x	Brazo servo 25 mm Futaba con rótula
1 x	Brazo servo 25 mm Hitec con rótula
1 x	Brazo servo 17 mm con rótula HITEC
1 x	Brazo servo 54 mm Futaba con rótula
1 x	Brazo servo doble pull-pull 50/60 mm Futaba con rótulas
1 x	Brazo Servo XTorque 38 mm HITEC 25T
1 x	Brazo servo 38 mm Hitec con rótula
1 x	Brazo servo doble 2x20 mm Futaba
1 x	Brazo servo doble pull-pull 76/92 mm Futaba con rótulas
1 x	Brazo servo 46 mm Futaba con rótula
1 x	Base de soporte montaje servos Std. vertical
1 x	Brazo servo Futaba tandem 54 mm con rótula
1 x	Brazo servo 52 mm Futaba
1 x	Base de soporte montaje servos Std. apaisado
1 x	Brazo servo 38 mm Futaba con rótula
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	KIRA 400-39 5,2:1
1 x	OS 37 SZ-H, Biela
1 x	Combo FOXY C3530-700 + FOXY 80 amp
1 x	Tubo de latón (L 1000 mm, Ø8,0 mm, Ø6,1 mm
1 x	Tubo carbono 3K-PW (Ø40 mm, Ø37 mm L:2000 mm)
1 x	Motor OS MAX 120 AX
1 x	Tubo carbono 3K-PW (Ø25 mm, Ø22.5 mm L:2000 mm)

7,661.27EUR