419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Perfil Acero Inox. 11.5x6.5x1000 mm
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Perfil de ABS de media caña 3x1000 mm
1 x	Perfil Acero Inox. 7.5x4.5x1000 mm
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Conector ABS "L" 1.5 mm x 1000 mm
2 x	Canal de ABS de 3,0x6,0x1000 mm
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
2 x	Perfil de ABS "L" 5,0x5,0x1000 mm
2 x	Perfil de ABS de media caña 2,5x1000 mm
1 x	Conector ABS "T" 4.0 mm x 1000 mm
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Canal de ABS de 2,0x4,0x1000 mm
1 x	Perfil Acero Inox. 6.3x3.5x1000 mm
1 x	Perfil de ABS "T" 10.0x10.0x1000 mm
2 x	Perfil de ABS "T" 2.0x2.0x1000 mm
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
2 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Conector FESTO "Y" 4mm
3 x	Conector FESTO "T" 2mm
1 x	Adaptador FESTO 4mm/ Tygon
1 x	Fail Safe air retract
1 x	Anclaje carenado ruedas Ø 4 mm (2 uds)
1 x	Pasa muros FESTO 6-6 mm
1 x	Prisionero 2 mm Ø (4 uds)
1 x	Llave FESTO
1 x	Cuerpo para tren aterrizaje Ø 3 mm
1 x	Grifo FESTO 4-4 mm
1 x	Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
3 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
2 x	Cable servos silicona 0,35 mm2 Futaba (100 m)
1 x	Cable servo PREMIUM 200m (blanco/rojo/azul)
1 x	Cable silicona 0,25 mm² blanco (25 m)
1 x	Cable servos silicona 0,35 mm2 Graupner (100 m)
1 x	Cable servos silicona 0,25 mm2 Graupner (5 m)
2 x	Cable Cargador FUTABA
1 x	Cable servos silicona 0,14 mm2 Graupner (5 m)
1 x	Cable servos PVC 0,25 mm2 Graupner (5 m)
1 x	Cable silicona 0,25 mm2 blanco (100 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cable servo JR silicona 0,35 mm2 / 5m
1 x	Cable servos silicona 0,50 mm2 Graupner (5 m)
1 x	Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Gancho remolque inferior plano
1 x	Iniciadores eléctricos cohetes (6 pcs)
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x	Tubo acero (L 1000 mm, Ø7 mm, Ø6,7 mm)
1 x	Tubo ABS 3,0x1,0x1000 mm
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Tubo acero (L 1000 mm, Ø12 mm, Ø11,7 mm)
2 x	Perfil de ABS "L" 2,0x2,0x1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Soporte conector XT-60 (2 pcs)
1 x	Perfil de ABS triangular 6.0x1000 mm 90º
1 x	Rueda KOVO SLH 120x60 mm
1 x	Rueda KOVO SLH 110x55 mm
1 x	Rueda Jets 115x29 (4.50") centro aluminio
1 x	Rueda 152x46 centro aluminio Ø6.0 mm
1 x	Rueda superlight deluxe 150 mm hinchable (2 pcs)
2 x	Palas de autogiro de 330 mm
1 x	Rueda KOVO SLH con rodamiento y núcleo metálico 170x54 mm
1 x	Rueda KOVO espuma 32x9 mm estándar (2 pcs)
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Adaptador 3,2 mm M8 para cono 40 mm hélice pleg.
1 x	Adaptador de hélice 3 mm M5 (corto)
1 x	Prisionero allen M4x4
1 x	Prisionero aluminio 2.5 mm Ø (4 uds)
1 x	Adaptador 3,2 mm M6 para cono 30 mm hélice pleg.
1 x	Prisionero aluminio 3.5 mm Ø (4 uds)
1 x	Canal de ABS de 1,0x2,0x1000 mm
1 x	Adaptador 4,0 mm M8 para cono 40 mm hélice pleg.
1 x	Combustible Glow 4T "KAVAN" air/heli 15% nitro
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
2 x	Tren retráctil veleros hasta 2 Kg
1 x	Conector FESTO M7 racor 4mm
1 x	Tubo FESTO de poliuretano 3x0,5 mm (transparente)
1 x	Funda anticalorica de fibra de vidrio Ø 6 mm 1000 mm
1 x	Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x	Funda Protectora cables Ø 15 mm 1000 mm
1 x	Conexion PREMIUM MAXI fuselaje/alas para 2 servos MPX 200cm
1 x	Prolong. Hembra XH 30 cm para 3 elem. cables silicona 0,25 mm2
1 x	Cable silicona 0,25 mm² negro (25 m)
1 x	Cable servo PVC 0,14 mm2 Hitec/Mpx (5 m)
1 x	Cable PVC 2 x 0.25 mm2 (5 m) rojo-negro
1 x	SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x	Autogiro LA500
1 x	Rueda espuma Ø 55mm x 19 mm (2pcs) eje Ø 3.5mm
1 x	Gancho de lanzamiento regulable
1 x	Rueda superlight deluxe 75 mm (2 pcs)
1 x	Sistema completo de conversión eléctrico
1 x	Rueda 115 mm con electrofreno (2 uds)
1 x	Rueda espuma Ø 65mm x 19 mm (2pcs) eje Ø 3.5 mm
1 x	Pegatinas Cierva C30 versión española
1 x	Parte inferior del rotor
1 x	Bahía de la batería
1 x	Corona pre-rotación LA500
1 x	Cono aluminio 34 mm / 3.17 mm helice plegable
1 x	Soporte motor serie 990/1000 mm
1 x	Soporte metálico para motores clase 550-600
1 x	Rueda radios 220mm (2 pcs)
1 x	Rueda de cola 20 mm para modelos 0,5-1 Kg
1 x	Rueda de cola 18 mm
1 x	Rueda radios 270mm (2 pcs)
1 x	Soporte frontal para Speed 400/480
1 x	Bidule 55 V3 2460 mm
1 x	Prolongador motor XXL Blazing 60-83 mm
1 x	Terminales riostras M3x16 (2 uds)
1 x	Placa de montaje Ø 40 mm para motores eléctricos
1 x	Rueda superlight deluxe 56 mm (2 pcs)
1 x	Astra (Top Model)
1 x	Rueda superlight deluxe 68 mm (2 pcs)
1 x	Bancada AXI
1 x	Astra Bayoneta (Top Model)
1 x	Rueda superlight deluxe 45 mm (2 pcs)
1 x	Adaptador de hélice 4 mm M6
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Tubo de latón (L 1000 mm, Ø10,0 mm, Ø9,1 mm)
1 x	Tubo carbono (L 1000 mm, Ø4 mm, Ø2,5 mm)
2 x	Capuchón decorativo interruptores TX
1 x	Tren retráctil
1 x	Captador OS GT 33 cc
1 x	Motor OS MAX 65 AX (incl. silenciador)
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (sin rueda) 140 mm
1 x	Motor OS 55 AX
1 x	Motor OS FS-62V 4T
1 x	Avanti XS 1.8m Jet FREECE TRICOLORI con tren aterrizaje (SebArt)
1 x	Hélice plegable CAM-Carbon 10x6
1 x	Hélice plegable CAM-Carbon 14x10
1 x	Hélice plegable CAM-Carbon 15x13
1 x	F-104 Starfighter Y/B Aniversario (SebArt)
1 x	Epoxy SLOW-CURE™ 30 min (130g)
1 x	Adaptador 3,0 mm M6 para cono 40 mm hélice fija.
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Perfil Acero Inox. 10.5x5.7x1000 mm
1 x	Perfil de ABS "L" 3,0x3,0x1000 mm
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Capuchón decorativo interruptores TX cortos
1 x	Listón de HAYA redondo 4,0 x 1000 mm
1 x	Soporte motor serie 1200 mm
1 x	Motor OS 15 LA
1 x	Motor OS 95 AX
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 140 mm con freno)
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 127 mm)
1 x	Tren retráctil veleros hasta 3,5 Kg
1 x	Bujia OS G5 gasolina
1 x	OS GT15 W/E-4040 for airplane
1 x	Motor OS 81 FS 4T
1 x	Motor OS FS 95 V4T
1 x	Motor OS 40-FG 4T
1 x	Motor OS MAX 160 AX
1 x	Motor OS 105 HZ-R Heli
1 x	OS 37 SZ-H, Biela

13,642.74EUR