419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

under request

Reviews

Quick Find

Shopping Cart

1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
2 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors DEANS (T) micro
1 x	Connector CAN 15
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Conector BEC male (10 pcs)
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 2 mm (M/F)
1 x	30 cm MULTIPLEX female connector
1 x	Connectors DEANS 4 pins (1 pair)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Conector FUTABA Servo male (10 pcs)
1 x	Conector JR Servo female (10 pcs)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Bag connector 2 mm
1 x	Connectors DEANS (T)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Conector MR-60 (pareja)
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Adaptadores carga 6s JST-XH
1 x	Crimping tool
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	SUS wire 3m (nylon coated)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Cockpit plastic closing
1 x	One touch canopy lock
1 x	Steering arm 12 mm Ø 4 mm
1 x	Covered closure or fairings
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Canopy Latch
1 x	800TVL CMOS camera for FPV
1 x	Jeti Black cap
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Small pinned hinge (12 uds)
1 x	15 mm reinforced hinge
1 x	Gates hinge aluminium (1 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gates hinge
1 x	Flap hinge (6 pcs)
2 x	Miniature brass strap hinge, 1 m
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Large flex hinge (12 uds)
1 x	Flap hinge 33x9 mm (6 pcs)
2 x	Gates hinge 30x16 mm (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
2 x	25 mm reinforced hinge
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	18 mm reinforced hinge
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Cable Cargador FUTABA
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	5 line servos wire black (1 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	White silicone 0,25 qmm wire (100 m)
2 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
2 x	200m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
2 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
2 x	MPX screwable clips (4 pcs)
1 x	Extension 15 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Soporte carbono MR30 (2 pcs)
1 x	Tape GFK 38 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Green smoke canister 100 g
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Conector Servo female 4 pines
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Connectors banna oro 4 mm (M/F)
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	42,0 mm propeller (left propeller)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	75 mm
1 x	Lead with adhesive (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	270 mm 3/3 mm shaft ship
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	38 mm fenders (10 pcs)
1 x	39,0 mm propeller (left propeller)
1 x	120x60 mm SLH KOVO wheel
1 x	Indoor hinge with servo arm integraded
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	Glider PIROL
1 x	Oracover Yellow CUB 2 m
1 x	Oracover light Grey 2m
1 x	Propeller electric carbon 9.5x6
1 x	EDGE 540-A 105" (2660 mm)
1 x	Propeller electric carbon 8.5x6
1 x	Porpeller HUNTER 480
1 x	Propeller POWER-PROP 10x7 Izda
1 x	Prop Holder AXI 41xx V2
1 x	Propeller electric carbon 10x8
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Small pinned hinge (6 uds)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Silicone black 0,75 qmm cable ( 1 m)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Silicone red 0,5 qmm wire ( 1 m)
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Silicon black 2,5 qmm cable ( 25 m)
1 x	Motor OS 15 LA
1 x	Ball link M3 (6 uds)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Ball link M3 (10 pcs)
1 x	M3/5 Diam metal short ball link V3 (2 pcs)

6,702.22EUR