419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

under request

Reviews

Quick Find

Shopping Cart

2 x	Ventus 1:4 set of instruments
1 x	Extinguisher CO2 - 2 Kg
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Round Rod 5,0x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
2 x	Spannlack 1000 ml
2 x	Partall paste 650 g
4 x	Spray EC Red 400ml
2 x	Beech dowels 2.0 x 1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
2 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
2 x	Plasti Dip Liquid Tape 429 ml black
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
2 x	Plasti Dip Liquid Tape 429 ml black
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
2 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
2 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Spray adhesive AEROFIX 2
3 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Universal Colour Paste deep black 50 g
2 x	Beech dowels 3.0 x 1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x
2 x	BALSA trip 3.0x5.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Hobbylite Filler, Balsa colour
1 x	Painting GHT Lexan Black 150 ml
2 x	Solvent Plasti Dip 1000 ml
2 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Paint gun for sprays
2 x	Nitroverdu 500 ml
2 x	1000 ml sealer (DOPE)
2 x	BALSA trip 6.0x6.0x1000 mm
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
2 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
2 x	U Profile ABS 3,0x6,0x1000 mm
2 x	U Profile ABS 2,0x4,0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
3 x	U Profile ABS 1,0x2,0x1000 mm
2 x	U Profile ABS 8,0x4,0x1000 mm
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Motor DLE 430 cc - Paramotors
2 x	Silent-blocks DLE 170M
1 x	Extractor piñones 2.3/3.2 mm
1 x	Smoke set "Glider"
1 x	Angle of incidence meter
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	100 mm rods set for direction control
2 x	290 mm M4/4 mm Prop shaft
2 x	10 mm Prop Adapter M12
2 x	3 mm Leader (L 100 mm)
1 x	25 mm fenders (10 pcs)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	BlueCom™ Adapter (iOS)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Sparkplug DLE CM6
1 x	280 cc gasoline fuel tank complet
1 x	FESTO connector M7 barb fitting 6mm
1 x	Spark motor OS nº 3
1 x	Y-Hose connector 4-4-4mm
1 x	Extra hard 250 ccm complete gasoline fuel tank
1 x	DLE 111 pipe plug
1 x	FESTO connector 1/8 Quick 6mm 90º
1 x	1000 cc gasoline fuel tank complet
1 x	Deposito combustible tipo "turbina" 330 ml
1 x	500 ccm complete gasoline fuel tank
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Secraft Fuel system v2, red color
1 x	Ball Bearings for motor A60-V2
1 x	Electric Fuel Pump 12V
1 x	Smoke pump RCEXL
1 x	PPS-4D Propeller
1 x	Nose OPTIMA 2.200 mm (Elec or Glider)
1 x	Motor mount VANQUIST 48" F3A
1 x	9x4.7 * 22x12 carbon propeller
1 x	BALSA triangular 6x6x1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
2 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
2 x	20 g tin paste
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Balsa panel 10x100x1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Green smoke canister 140 g
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Balsa panel 2.5x100x1000 mm
2 x	BALSA leading edge 8x10x1000 mm
1 x	Universal Colour Paste white 50 g
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Spray Graphit 33
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	500 ml sealer (DOPE)
2 x	BALSA triangular 10x10x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
2 x	Birch plywood plate 600x300x3.0 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Release wax 250ml
1 x	Rubber profile 10-2 mm 2M
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Profile ABS half cane 7.0x1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Motor DLE 170 M- Paramotors
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Small Crow DLE-170M
1 x	Central piece 3Bl 47 mm 0º
1 x	3,2 mm Prop Adapter M6
1 x	Central piece 47 mm + 5º
1 x	Davit 70 mm (2 pcs)
1 x	Central piece 42 mm + 2,5º
1 x	Davit Ms 35 mm (1 par)
1 x	Central piece 52 mm + 2,5º
1 x	3.2 mm Prop Adapter M6
1 x	12x8 tree blades propeller
1 x	290 mm 8x4 M4 shaft ship
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	15x7 tree blades propeller LEFT
1 x	29,0 mm propeller (left propeller)
1 x	3 mm Prop Adapter M6
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	16x10 tree blades propeller Master Airscrew
1 x	3,2 mm Prop Adapter M6
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	12x6 tree blades propeller
1 x	10x7 tree blades propeller
1 x	31,0 mm propeller (rigth propeller)
1 x	28 mm turnbuckle
1 x	12 mm portholes (10 pcs)
1 x	29,0 mm propeller (rigth propeller)
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Initior Transmitter FTX2 Wireless
1 x	Faucet FESTO
1 x	Planetary gearbox(3,8:1)
1 x	Excentric gearbox for 2,0mm axis (4,1:1)
1 x	Motor OS 37 SZ-H

10,286.37EUR