16.00EUR

Opto Gas Engine Kill Switch
[SETOKW]

This kill switch is double Optically Coupled to isolate your ignition system from your radio system (No Interference!!). It also consist an additional safety functions.

Device features
• Includes a remote mountable ultra bright LED to indicate when the ignition is armed or not, or if the safety sequence protection is active.
• The LED diode informs also if Fail-Safe occured during flight (even after landing).
• Safety sequence protection for engine ignition powering up after model preparation.
• Double optically Coupled input/output is Isolated.
• Turning engine ignition ON or OFF directly from RC Transmitter
• No need to use additional mechanical switch for disconnecting ignition battery.
• 8 Bit microcontroller powered directly from RC receiver.
• 3,0 - 24,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input (receiver side).
• 3,0 - 20,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad MOSFET Output (ignition side).
• Possible to use one battery setup (independent two batteries setup by default).
• Max. current output: 5 Amp continous, 16 Amp peak
• Fail-Safe engine kill when interference or signal lose is longer then 1 second. (this function can be turned OFF).
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires 22AWG, universal connectors Futaba/JR.
• Small and light weight – only 15 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spark motor OS nº 3

temporarily out of stock

Quick Find

Shopping Cart

1 x	Glases Ace
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Glases Nimbus "Black"
1 x	Glases Stratus
1 x	Glases Nimbus
1 x	Glases Moritz
1 x	Glases Innovation Plus
1 x	BEC 3A FOXY
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	4 LiPo XH>EH adapter
1 x	ABS tube 9.0x8.0x1000 mm
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	CC 02
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Adapter lead MPX/XT60
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Dean "T" - Futaba Adapter
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
3 x	TP/TopFuel - XH 2/3S Adapter
1 x	ABS tube 9.0x7.0x1000 mm
1 x	3 LiPo XH>EH adapter
2 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Adapter lead MPX/EC3
1 x	ABS tube 20.0x18.0x1000 mm
1 x	USB HLS prog. interface
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	APM2.6 Power module with 5.3V DC BEC
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	ABS tube 7.0x6.0x1000 mm
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Servo NARO Max Std
1 x	CM-3
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Circlick securite
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
2 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
2 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
2 x	White silicone 0,25 qmm wire (150 m)
2 x	Silicone red 0,25 mm² wire (25 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
2 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	100m servo "Premium" wire (white/red/blue)
1 x	White silicone 0,25 qmm wire (100 m)
2 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
2 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Extension silicon 30 cm male (Graupner)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Futaba male 40 cm extension
1 x	Extension silicon 10 cm (Futaba)
1 x	Circlick securite
3 x	Cabel "Y" 30 cm (Futaba)
1 x	Extension 7.5 cm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension silicon 100 cm (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Blade Holder Full (4 blades)
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
2 x	ABS tube 18.0x16.0x1000 mm
1 x	Glases Aspen
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Hovercraft sailcloth
1 x	Fiberglass tube 6/4x1000mm
1 x	Soporte grifo FESTO (2 pcs)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
2 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	5 line servos wire black (1 m)
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Extension 5 lipos JST - JST/C
1 x	Opto Gas Engine Kill Switch
1 x	SWTU2 switch
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	PowerBox SparkSwitch RS
1 x	Multi-adapter balancer JST/C - TP
1 x	DPSI magnetic switch actuator (housing)
2 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
2 x	Extension 5 lipos JST/C - JST
2 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Cable Cargador FUTABA
1 x	5 LiPo XH>EH adapter
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	30 cm BEC cable (male)
1 x	Carbon fiber rod 5.0 mmx1000 mm
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
2 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	30 cm BEC cable (female)
1 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
2 x	ABS tube 5.0x3.0x1000 mm
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
2 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x	Mega Motor RC 400 F5J 1950KV
1 x	Motor Mega AC 16/15/07 COMBAT
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
2 x	Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
2 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
2 x	Cotton Flocks, bag/ 500 g
1 x	resin-hardener L-385 H-385 (1250 g)
2 x	Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Silicone red 6,0 qmm wire ( 1 m)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x	CC 01
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x	SLICK 360-B 104" (2640 mm)
1 x	EDGE 540-A 74" (1880 mm)
1 x	Extension 6 lipos XH > EH
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Head upper part
1 x	Motor Mega AC 16/15/04 COMBAT
1 x	Motor OS FS-62V 4T
2 x	3 blades set
1 x	Motor OS FS 95 AX
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Blade Holder Full (3 blades)
1 x	4 blades set
1 x	Fuselage Autogyro RAINBOW
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	Sukhoi 29S 2,6 m,CF landing gear(SebART)
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Sebart 2.2 m YELLOW/BLACK (SebART)
1 x	Sukhoi 29S 2,6 m White/Blue (SebART)
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	EDGE 540 1.73m SEAGULL Model
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	Sebart 2.2 m WHITE/BLUE (SebART)
1 x	EDGE 540-A 91" (2310 mm)
1 x	ULTRA STICK 10 cc ARF
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	ULTRA STICK 30 cc ARF
1 x	SLICK 360-A 104" (2640 mm)
1 x	Futaba Female 40 cm extension
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Cabel "Y" 30 cm (graupner)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Extension 2/3 lipos JST/C
1 x	Protector Connector MPX (1 pair)
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Red 3m5 mm connector holder
1 x	Welder 100W/200V
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Captador OS GT 33 cc
1 x	Motor OS MAX 65 AX (incl. muffler)
1 x	Motor OS 55 AX
1 x	OS 37 SZ-H, Connecting rod
1 x	OS Engine 105HZ-R Heli
1 x	Motor OS 50 SX-Hyper
1 x	Motor OS 46 AX II
1 x	Bujia OS G5 gasolina
1 x	Motor Mega AC 22/35 4S
1 x	Motor Mega AC 16/25/01E 3.17mm
1 x	Motor Mega AC 16/07/08
1 x	Motor Mega AC 16/15/05 CE F5J
1 x	Motor Mega AC 16/25/02
1 x	Motor Mega AC 16/07/12
1 x	Motor Mega AC 22/30/03
1 x	Motor Mega AC 22/30/02
1 x	Tail tube RAINBOW
1 x	Motor Mega AC 16/25/04 COMBAT
1 x	Motor Mega AC 16/15/07
1 x	Motor Mega AC CAR 10 PRO
1 x	Motor Mega AC 16/07/04
2 x	Glass Bubbles (0,12 g) 350 ml
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Secraft Fuel system v2, red color
2 x	Cotton Flocks, bag/ 7 Kg
1 x	Connectors banna oro 2 mm (M/F)
1 x	Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x	Thixotropic agent tin/ 15 g (approx. 350ml)
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Servo Mount M (blue)
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	120x60 mm SLH KOVO wheel
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)

28,540.52EUR