Top » Catalog » Model Motors » MM281416V2L

92.00EUR

AXI 2814/16 V2 Long
[MM281416V2L]

New more powerful and more efficient generation of AXI brushless outrunners AXI 28xx V2 with integrated cooling system based on turbine effect keeps motor winding cooler up to 20%. Rotors are precise balanced on the most accurate Schenk balancing machine. New motors run quiter thanks to new high quality Japanese long lasting ball bearings.

The high performance, robust and reliable brushless motors AXI 28xx V2 with rotating drum and neodym magnets are based on the legendary AXI 2820/10 released onto the market in 2001. The hardened steel shaft 5mm diameter supported by two ball bearings ensure excellent durability using normal or radial mounting. The light weight AXI 2808/xx V2 is suitable for models up to 1500g in weight. The AXI 2814/xx V2 is mostly applicable for 500 - 600 size size models of up to 2000g in weight.

Due to their high torgue, AXI 2820/xx V2 and 2826/xx V2 with a rotating drum are capable of turning large diameter and high pitch propellers with high efficiency on direct drive. The benefit of these motors is a 5mm shaft supported by 3 ball bearings, which brings excellent durability and allows for the high dynamic loads common in aerobatic flights.

AXI 2820/xx V2 and 2826/xx V2 motors are suitable for sports aerobatic models up to 2500g, and for sailplanes up to 3000g in weight.

High torque brushless motor with rotating drum and high power neodym magnets suitable for models of 500-600 size, and up to 1900g in weight. The hardened steel 5mm diameter shaft and is supported by three ball bearings.

TECHNICAL SPECIFICATION

No. of cells: 3 Li-Poly
RPM/V: 1035 RPM/V
Max. efficiency: 84%
Max. efficiency current: 12 - 20 A (>75%)
No load current: 1 A
Current capacity: 34 A/60 s
Internal Resistance: 85 mohm
Dimensions (∅ x L): 35x45 mm
Shaft diameter: 5 mm
Weight: 115 g
Max. Power: 325 W

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	ARAMID honeycomb 1300x2600x2 mm
2 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Tailwheel for F3A size
1 x	Tailwheel for 1-3 kg models
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Brass control horn M4 short for wire (10pcs)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Carbon plate 350x150x1.0 mm
1 x	Foam plastic plates (310x210x5 mm)
2 x	Fiberglass plate 350x150x2.0 mm
1 x	Fiberglass plate 620x540x0,2 mm
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Fiberglass plate 350x150x0.3 mm
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Release film 100 cm x 50 m
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x	Styrene plate 320x120x0.5 mm
1 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x	Servo NARO Max Std
1 x	Tailwheel for 60/120 size
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Tail gear set (60-120 class)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	28 mm tailwheel unit
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Bird (Aero-naut)
1 x	Hovercraft sailcloth
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Servo holder for retract
1 x	Starter EM Gear Power 250
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
2 x	Starter EM Gear Power 80
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Sprung retractable undercarriage (Alfa model)
1 x	Blade Holder Full (3 blades)
1 x	Foam air filter Ø 48 mm, blue
1 x	Charger SKY RC e680
1 x	20 g tin paste
1 x	Xplorer3 anemometro
1 x	1,5x50 mm allen screwdriver
1 x	30 cm BEC cable (male)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	12.7 mm 2:1 black termoretract tube
1 x	METEOR 1.000 mm kit
2 x	Adpater for mounting VMKG gearbox in 480 motor
2 x	AXI 2820/12 V2 Long
2 x	AXI 2814/12 V2
2 x	AXI 2826/6 V2
2 x	AXI 2826/10 V2 Long
1 x	AXI 2808/20 V2 Long
1 x	AXI 2826/8 V2
1 x	Racor 2/3 mm
1 x	AXI 2820/8 V2 Long
1 x	AXI 2808/16 V2 Long
1 x	AXI 2217/20 V2 Long "F5J"
1 x	AXI 2814/10 V2
1 x	AXI 2814/20 V2 Long
1 x	AXI 2826/10 V2
1 x	AXI 2808/24 V2
1 x	AXI 2820/12 CYCLONE
1 x	2020 motor power ring
1 x	AXI 2204 Multicopter
1 x	AXI 2826/8 V2 Long
1 x	AXI 2820/10 V2

8,973.56EUR