599.88EUR

Esc KOSMIK 160 HV
[KON4816]

With the new KOSMIK KONTRONIK defined a new high-end level. Optimally protected in a plastic case covered by two aluminum plates the KOSMIK conceals its interior: power stability to 200 A and a voltage range up to 14 S. Also included are anti-spark, RC car mode with reverse option and high part load capability even at high power. So the KOSMIK can cope with all requirements you can have for an ESC of superlatives.

The KOSMIK‘s new cooling concept with two aluminium plates and optional heat sinks allows operation at extreme high contiuous current. No other KONTRONIK ESC could ever take that high current.

BEC
One important feature of the KOSMIK is the strongest BEC KONTRONIK has ever developed. With a voltage from 5 V up to 8 V and a current capacity of 7 A continuous and up to 20 A peak the KOSMIK is the ESC for the most demanding tasks. The KOSMIK hast two BEC ports which have to be used when high BEC current is required. The two BEC cables are included in the package.

Screwed instead of soldered
No wires. This is maybe the first thing you notice looking at the new KOSMIK. In order to handle the enormous power the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and forms a reliable high current connection.

Data interfaces
Therefore the KOSMIK, in addition to three connectors for sensors and telemetry, provides a fast micro USB port in order to give out and process operation data.

Mode-Programming
The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. Thus, the ESC is rapidly deployable and can be customized for different applications within the shortest possible time.

PROGDISC compatible
The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows to change individual parameters and helps to adjust the KOSMIK to your personal preferences.

Online updatable
Of course, the KOSMIK is also updatable online. This allows software updates easily set at home. Long downtimes caused by sending and waiting are a thing of the past.

LED
Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support.

Logger
As the first KONTRONIK ESC the KOSMIK offers the possibility of recording operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology.

MicroSD Card
All recorded data are written on a MicroSD card. This enables a flexible analysis of a great data volume.

COOL KOSMIK
If you love style and function, the Cool KOSMIK is made just for you. With an integrated fan combined with an active heat sink, you will find no better cooling solution available. You will immediately notice the stylish design of the integrated cooling plate, and will appreciate the active cooling fan in low airflow situations.

COOL KOSMIK, a design that is made for the most demanding situations.

KOSMIK 160 HV specifications
- 5-14 Lipo, 20-59 V
- 160 A continuous current
- BEC 7 A cont. current
- BEC 20 A peak current
- 108x53x28 mm
- 200 g without cable

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	HITEC 17 mm servo arm with ball link HITEC
1 x	XTorque CFK Servohebel 38
1 x	Futaba 46 mm servo arm with ball link
1 x	Futaba 52 mm servo arm
1 x	HITEC 20 mm servo arm with ball link
1 x	Hitec 38 mm servo arm
1 x	Futaba 50/60 mm servo pull-pull double arm with ball link
1 x	Futaba 20 mm servo arm
1 x	Futaba 54 mm servo arm with ball link
1 x	17 mm servo arm with ball link DES Graupner
2 x	Hitec 25 mm servo arm with ball link
1 x	Futaba 25 mm servo arm with M3 ball link
1 x	Horizontal mounting servo holder
1 x	Futaba 30 mm servo rounded arm
1 x	Hitec 52 mm servo arm
1 x	Hitec 46 mm servo arm with ball link
1 x	Futaba 38 mm servo arm
1 x	54 mm Futaba servo arm tandem with ball link
1 x	Adapter rotula M3
1 x	Futaba 25 mm servo arm with ball link
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link
2 x	Hitec 25 mm servo arm with M3 ball link
1 x	Vertical mounting servo holder
1 x	Futaba 30 mm servo arm with M3 ball link
1 x	FUTABA 20 mm servo arm with ball link
1 x	Hitec 20 mm servo arm
1 x	Wing OXY 5,0 m2
1 x	1/10 Pilot "Jack"
3 x	Piloto Jet "Red" 1/6 Scale
1 x	Parachute BACKUP X100
3 x	1/4 Pilot "Mike"
4 x	Parachute P4
1 x	Paramotor BackPack XXS 2
4 x	Civilian pilot "Curt" size 9cm (Slimline)
3 x	1/10 Pilot "Jimmy"
1 x	Pilot "Adolf" Legends Series (Slimline)
2 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	1/12 Pilot "Cougar"
3 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
3 x	1/6 Pilot "Cindy"
2 x	Pilot "Goose" (Slimline)
1 x	Rescue 1,8m2 / BackPack
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
3 x	1/6 Pilot "John"
3 x	1/6 Pilot "Garry"
2 x	Paramotor BackPack XXS (without accessories)
1 x	Para-RC "RC-Evo-Cross" Rescue
6 x	Piloto jet 130 mm
3 x	1/12 Pilot "Langley"
1 x	MAX pilot ARTF
2 x	Pilot JAN 1/4 Saiplanes
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
2 x	1/6 Pilot "Tony"
1 x	Paramotor Trike XL
2 x	Trike XL motor set (motor+esc+prop)
3 x	Civilian pilot "Gramps" size 9cm (Slimline)
2 x	Civilian pilot "G-Man" size 9cm (Slimline)
2 x	1/7 Pilot "Japanese"
2 x	1/12 Pilot "Tom"
1 x	Adaptadores carga 6s JST-XH
1 x	Extension MPX-MPX 20 cm
1 x	Crimping tool
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	White smoke bombs AX-9 (10 pcs)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	Programador FUTABA USB CIU-3
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
2 x	1/4 Pilot "Heidi"
2 x	Pilot "Anthony" (Slimline)
3 x	Pilot "Duke" Legends Series (Slimline)
2 x	Support FUEL DOT V3
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Soporte grifo FESTO (2 pcs)
2 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Propadapter for motor A50-V3
1 x	"L" servo arm 65x49 mm (2 pcs)
3 x	Servo AN-8 HBA
2 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
3 x	Servo AN-20 MGBBA
1 x	ALU double servo arm 3 mm shaft
2 x	1/6 Pilot "Buddy"
1 x	ALU servo arm 90º 3 mm shaft
1 x
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 450 mm (2 pcs)
2 x	Servo NARO Max Std
1 x	10-15mm Servo Arm HITEC
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	Electromotor starter EME 35cc
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Release film 100 cm x 50 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Foam plastic plates (310x210x5 mm)
1 x	Spring clamp for tube Ø50 mm
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	Compact on-board starting system (9525)
2 x	Suction funnel for carburetor 90D-M (red)
2 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Small aluminium horn blue (2pcs)
1 x	Cable control set
1 x	USB Charger 120-240V AC
2 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	EXTRA NG 85" 2159mm yellow/blue
2 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	LASER 260 60" V2 ARF Red (SkyWing)
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	SLICK 360-A 104" (2640 mm)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Small aluminium horn gold (2pcs)
1 x	Horn 5/15 with M2 Bearing
2 x	Piloto Jet "Green" 1/6 Scale
2 x	USB Charger 12V DC for car
1 x	Shirt Hispano Aviación
2 x	Pilot "Dick" Legends Series (Slimline)
1 x	Servo BLS-M55B 61.2kg
2 x	1/12 Pilot "Fighter"
2 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Vest clothes Hispano Aviación
1 x	Servo BLUE Bird BLS-H71B v2
2 x	Piloto JET 1:3,5
1 x	FOD Screen K140G/K180G/K210G
1 x	Bidule 55 2460 mm Cabina
1 x	SE Ring 300 mm (2 pcs)
1 x	Turbine KINGTECH K85 G4
1 x	Battery LiFe -3800/25C-3S 9.9V
1 x	Turbina JetsMunt M166TS
1 x	Exhaust K45TP
1 x	Turbine KingTech K45G4+
1 x	Recessed MPX connector support (6 pcs)
1 x	Rocket D3-P
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	CARBON CUB 15cc ARF 2280 mm
1 x	ULTRA STICK 30 cc ARF
1 x	EDGE 540-A 74" (1880 mm)
1 x	Sebart 2.2 m YELLOW/BLACK (SebART)
1 x	PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x	EDGE 540-A 91" (2310 mm)
1 x	EDGE 540 1.73m SEAGULL Model
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Excentric gearbox for 2,0mm axis (4,1:1)
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Fiberglass plate 620x540x1,0 mm
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Horn 5/20 with M2 Bearing
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	4 LiPo XH>EH adapter
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	30 cm BEC cable (female)
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Planetary gearbox(3,33:1)
1 x	STD excentric gearbox for 2,0mm axis (4,1:1)
1 x	STD excentric gearbox for 2,0mm axis (4,5:1)
1 x	STD excentric gearbox for 2,3mm axis (3,5:1)
1 x	Excentric gearbox for 2,3mm axis (3,5:1)
1 x	Excentric gearbox for 3,2mm axis (3,0:1)
1 x	STD excentric gearbox for 2,3mm axis (2,33:1)
1 x	Planetary gearbox(3,8:1)
1 x	Excentric gearbox for 2,0mm axis (5,0:1)
1 x	STD excentric gearbox for 2,0mm axis (5,0:1)
1 x	Excentric gearbox BB for motor 600, 3,2mm axis (1,75:1)
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
2 x	Walbro carburetor for MVVS 26/30/35/40 cc
1 x	Esc KOSMIK 160 HV
1 x	HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x	Fiberglass plate 620x540x0,3 mm
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	KIRA 480-43
1 x	KIRA 400-39 5,2:1
1 x	DLE 55 carburetor
1 x	Suction funnel for carburetor 90D-L (red)
1 x	Extension Arm for Carburetor
1 x	SAITO FG-36 carburetor
1 x	EME 55 cc carburetor WALBRO
1 x	KingTech Turbineoil 10L
1 x	Reed valve for DA 50-R
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x	KIRA 600-16

34,541.37EUR