599.88EUR

Esc KOSMIK 160 HV
[KON4816]

With the new KOSMIK KONTRONIK defined a new high-end level. Optimally protected in a plastic case covered by two aluminum plates the KOSMIK conceals its interior: power stability to 200 A and a voltage range up to 14 S. Also included are anti-spark, RC car mode with reverse option and high part load capability even at high power. So the KOSMIK can cope with all requirements you can have for an ESC of superlatives.

The KOSMIK‘s new cooling concept with two aluminium plates and optional heat sinks allows operation at extreme high contiuous current. No other KONTRONIK ESC could ever take that high current.

BEC
One important feature of the KOSMIK is the strongest BEC KONTRONIK has ever developed. With a voltage from 5 V up to 8 V and a current capacity of 7 A continuous and up to 20 A peak the KOSMIK is the ESC for the most demanding tasks. The KOSMIK hast two BEC ports which have to be used when high BEC current is required. The two BEC cables are included in the package.

Screwed instead of soldered
No wires. This is maybe the first thing you notice looking at the new KOSMIK. In order to handle the enormous power the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and forms a reliable high current connection.

Data interfaces
Therefore the KOSMIK, in addition to three connectors for sensors and telemetry, provides a fast micro USB port in order to give out and process operation data.

Mode-Programming
The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. Thus, the ESC is rapidly deployable and can be customized for different applications within the shortest possible time.

PROGDISC compatible
The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows to change individual parameters and helps to adjust the KOSMIK to your personal preferences.

Online updatable
Of course, the KOSMIK is also updatable online. This allows software updates easily set at home. Long downtimes caused by sending and waiting are a thing of the past.

LED
Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support.

Logger
As the first KONTRONIK ESC the KOSMIK offers the possibility of recording operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology.

MicroSD Card
All recorded data are written on a MicroSD card. This enables a flexible analysis of a great data volume.

COOL KOSMIK
If you love style and function, the Cool KOSMIK is made just for you. With an integrated fan combined with an active heat sink, you will find no better cooling solution available. You will immediately notice the stylish design of the integrated cooling plate, and will appreciate the active cooling fan in low airflow situations.

COOL KOSMIK, a design that is made for the most demanding situations.

KOSMIK 160 HV specifications
- 5-14 Lipo, 20-59 V
- 160 A continuous current
- BEC 7 A cont. current
- BEC 20 A peak current
- 108x53x28 mm
- 200 g without cable

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	6 mm blue aluminium threaded horn with patella
1 x	Propeller APC 13x4 Electric Pusher
1 x	Propeller APC 10x4.7
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Propeller 11x4,7 SlowFlyer
2 x	Strip 1,5x1,5x330 mm
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Propeller 3x3
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	White smoke canister 65 g
2 x	ABS tube 8.0x6.0x1000 mm
2 x	ABS tube 6.0x4.0x1000 mm
2 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Smoke set "S"
2 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	SE Ring 250 mm (2 pcs)
2 x	ABS tube 3.0x1.0x1000 mm
2 x	ABS tube 7.0x6.0x1000 mm
1 x	Blue smoke canister 140 g
1 x	FIALA Propeller 19x12 Electric
1 x	Green smoke canister 100 g
2 x	SE Ring 480 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Ball link M2,5 (10 pcs)
2 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Long ball link M1.6 (6 uds)
2 x	Joint with bearing M2 22x5,5
1 x	Long ball link M3 (6 uds)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Short ball link M2 (6 uds)
1 x	Cierva C30 spanish decoration Stickers
1 x	Servo Fork
1 x	Screw M3x16
2 x	Nut M2
1 x	Cierva C30 Body Spain
1 x	Head lower part New
1 x	Cierva C30 simulated motor
2 x	Wheel keeper washer
1 x	Head core
1 x	Complet landing gear
1 x	Raer wall
1 x	Ball joint long
1 x	Screws M1,6x6 Allen
1 x	Propeller POWER-PROP 12x6
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Micro clevis (10 uds)
1 x	White large kwik link (10 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	ABS Strip 1.0x3.0x1000 mm
2 x	Extension silicon 50 cm (Graupner)
1 x	Extension PVC 150 cm (Graupner)
3 x	Extension silicon 30 cm female (Graupner)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Jeti Black cap
2 x	Extension silicon 100 cm (Futaba)
2 x	Cable coupler M2 (10 uds)
1 x	Round Rod 1.0x3.5 cm
2 x	Wire easy tensioner (silver)
3 x	Fully Threaded Steel Rod M2,5 (2 uds)
2 x	Cable coupler M2x66 (2 uds)
2 x	Pull-Pull complet set with CF rudder double servo arm
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	Porta Kwik link M4 4 mm (2 pcs)
1 x	Turnbuckle M1,6x20/30 (2pcs)
2 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
2 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
3 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
3 x	Servo HBS 690BB HV Digital
2 x	SERVO DES 806 Pignons
1 x	SERVO DES 707 BB MG
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
2 x	MultiLog Altimeter
1 x	20x1000 mm Ring Strap Back To Back
2 x	SERVO DES 658 BB MG
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 1,0x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Rubber bushing with bracket "B" type (2 pcs)
1 x	Metal clevis M2,5 (10 uds)
1 x	200 mm extensión servo HITEC/JR
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
2 x	Extension silicon 25 cm (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
3 x	Extension silicon 30 cm male (Graupner)
3 x	Extension silicon 10 cm (Graupner)
1 x	Extension 30 cm (Futaba)
3 x	Extension silicon 10 cm (Futaba)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
3 x	Extension silicon 100 cm (Graupner)
2 x	Cable S.BUS 3 salidas 100 mm
2 x	Cable S.BUS 3 salidas 300 mm
1 x	Futaba Female 40 cm extension
1 x	Extension silicon 75 cm (Graupner)
3 x	Extension silicon 30 cm male (Futaba)
3 x	Extension silicon 50 cm (Futaba)
2 x	Extension silicon 35 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
2 x	Cabel "Y" 30 cm (graupner)
1 x	Extension 15 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension 100 cm (Futaba)
3 x	Circlick securite
2 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
3 x	Cable coupler M3 (10 uds)
3 x	Pulley brass 2,5/1 (2 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
3 x	BRASS CONTROL HORN M3x16 mm 2pcs
2 x	wire tensioner (blue)
2 x	Wire easy tensioner (red)
2 x	Set clevis for pull-pull (TY13233 & TY13234)
1 x	Pulley brass 8/2 (2 pcs)
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Turnbuckle M2,5x27/43 (2pcs)
2 x	Stainless steel 3 m Pull-Pull complet set (max 20 kg)
2 x	Turnbuckle M2x29/43 (2pcs)
2 x	Turnbuckle M1,6x17/27 (2pcs)
1 x	Turnbuckle M2x22/35 (2pcs)
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	Pulley brass 14/2 (2 pcs)
1 x	Porta Kwik link M3 3 mm (2 pcs)
2 x	Cable coupler M2,5 (2 pcs)
2 x	Cable coupler M3 (10 uds)
1 x	Cable coupler M2 (10 uds)
1 x	wire tensioner (red)
1 x	Porta Kwik link M4 3 mm (2 pcs)
2 x	wire tensioner (black)
1 x	Turnbuckle M2,5x32/48 (2pcs)
2 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
2 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
2 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
2 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x	SAVOX SH 0254 servo
3 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
3 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
3 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
2 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
3 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
2 x	Fiberglass tube 6/4x1000mm
1 x	SERVO DES 588 BB MG
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	20x200 mm battery rings
1 x	SE Ring 400 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x
2 x	SERVO DES 707 BB MG, Pignons
1 x	Foil for sticking flaps and ailerons
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Socket head long ball link M3 (6 uds)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	M3 Maxi ball link (2 uds)
2 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	M3 Maxi ball link (2 uds)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Joint with bearing M2,5 22x5,5
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	M3/5 Diam metal short ball link V3 (2 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
2 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
1 x	30 cm BEC cable (male)
2 x	BALSA triangular 15x15x1000 mm
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
2 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Extension 6 lipos XH > EH
1 x	XT-60 connector (female)
1 x	Propeller FALCON 5-BL 24x23.5
1 x	Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x	HBC 10035-3 32-Bit
1 x	CC 01
1 x	25 mm reinforced hinge
1 x	18 mm reinforced hinge
1 x	Bearing 3x6x2,5
1 x	CC 02
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	XH female balance (2S) connector (2 pcs)
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	XH female balance (7S) connector (2 pcs)
1 x	Conector XT-30 (hembra)
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Red 3m5 mm connector holder
1 x	Connectors MPX male (PIN double)
1 x	XH female balance (9S) connector (2 pcs)
2 x	Extension silicon 25 cm (Graupner)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Extension 2/3 lipos JST/C
1 x	Crimping tool
1 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	Bag connector 2 mm
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	XH female balance (5S) connector (2 pcs)
1 x	Double conector with JR adapter and 200 mm extension
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	XH male balance (2S) connector (2 pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	Balsa panel 1.0x100x1000 mm
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Connectors MPX black male
1 x	Connectors MPX black female
1 x	XH male balance (6S) connector (2 pcs)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Connectors MPX 8 pins (green) 1 pair (male-female)
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Extension 5 lipos JST/C
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	XH male balance (4S) connector (2 pcs)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Mini neumatic retract landing gear
1 x	Propeller FALCON 27x10 3-BL carbono-gas
1 x	FALCON 27X11 CARBON PROPELLER (GAS)
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x	Yellow smoke canister 140 g
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
2 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Esc KOSMIK 200 HV
1 x	Strip 3,5x1,75x330 mm
1 x	JIVE 80+LV Esc
1 x	Green smoke canister 140 g
1 x	Soporte metal para servos
2 x	ABS I Strip 20x10x1000 mm
2 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
2 x	ABS tube 10.0x8.0x1000 mm
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	8 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Connectors banna oro 2 mm (M/F)
1 x	Extension 7.5 cm
1 x	Extension silicon 35 cm male (Futaba)
1 x	Extension lead 15 cm Multiplex
1 x	Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Yellow smoke canister 100 g
1 x	Red smoke canister 100 g
1 x	Threaded coupler M2,5 (10 pcs)
1 x	Yellow smoke canister 65 g
1 x	White smoke canister 140 g
1 x	Green smoke canister 65 g
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Cabel "Y" 15 cm
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
2 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 12.0x10.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Servo inverter
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	KIRA 480-38 5,2:1
1 x	KIRA 500-30 6,7:1
1 x	AX-60 starters (5 pcs)
1 x	JIVE 80+HV Esc
1 x	KIRA 600-17
1 x	Rocket D9-7
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Parachute expulsion foam
1 x	KIRA 480-31 5,2:1
1 x	KIRA 400-39 5,2:1
1 x	Grasa 2 ml
1 x	JIVE 100+LV Esc
1 x	Gearbox KPG27 5,2:1
1 x	KIRA 480-34
1 x	Gearbox KPG25 5,2:1
1 x	Gearbox KPG27/28 4,7:1pinion

10,519.14EUR