699.90EUR

Esc KOSMIK 200+ HV
[KON4820]

With the new KOSMIK KONTRONIK defined a new high-end level. Optimally protected in a plastic case covered by two aluminum plates the KOSMIK conceals its interior: power stability to 200 A and a voltage range up to 14 S. Also included are anti-spark, RC car mode with reverse option and high part load capability even at high power. So the KOSMIK can cope with all requirements you can have for an ESC of superlatives.

The KOSMIK‘s new cooling concept with two aluminium plates and optional heat sinks allows operation at extreme high contiuous current. No other KONTRONIK ESC could ever take that high current.

BEC
One important feature of the KOSMIK is the strongest BEC KONTRONIK has ever developed. With a voltage from 5 V up to 8 V and a current capacity of 7 A continuous and up to 20 A peak the KOSMIK is the ESC for the most demanding tasks. The KOSMIK hast two BEC ports which have to be used when high BEC current is required. The two BEC cables are included in the package.

Screwed instead of soldered
No wires. This is maybe the first thing you notice looking at the new KOSMIK. In order to handle the enormous power the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and forms a reliable high current connection.

Data interfaces
Therefore the KOSMIK, in addition to three connectors for sensors and telemetry, provides a fast micro USB port in order to give out and process operation data.

Mode-Programming
The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. Thus, the ESC is rapidly deployable and can be customized for different applications within the shortest possible time.

PROGDISC compatible
The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows to change individual parameters and helps to adjust the KOSMIK to your personal preferences.

Online updatable
Of course, the KOSMIK is also updatable online. This allows software updates easily set at home. Long downtimes caused by sending and waiting are a thing of the past.

LED
Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support.

Logger
As the first KONTRONIK ESC the KOSMIK offers the possibility of recording operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology.

MicroSD Card
All recorded data are written on a MicroSD card. This enables a flexible analysis of a great data volume.

KOSMIK 200+ HV especifications
- 5-14 Lipo, 20-59 V
- 200 A continuous current
- BEC 10 A cont. current
- BEC 30A peak current
- 108 x 53 x 28 mm
- 200 g without cable

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
2 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 360 mm (2 pcs)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	20x200 mm battery rings
2 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Extractor piñones 2.3/3.2 mm
2 x	800TVL CMOS camera for FPV
2 x	Big Crow DLE-170M
1 x	Motor DLE 430 cc - Paramotors
2 x	Motor DLE 200cc Std
1 x	Medidor ángulos y/o incidencias
2 x	Propeller balancer
1 x	Angle measurer
2 x	Field folding model stand
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	Field folding model stand SebArt
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Balsa panel 4.0x100x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Balsa panel 2.5x100x1000 mm
2 x	A/C quality beech plywood 600x300x5.0 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
3 x	BALSA trip 5.0x5.0x1000 mm
2 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Canopy Latch
1 x	100 mm rods + T patellas set for direction control
1 x	Strip 3,5x1,75x330 mm
1 x	Buy Perforated film 100 cm / 20 m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
2 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Birch plywood plate 600x300x3.0 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
2 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 4.5 mm x 1000 mm
3 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
3 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	Marker ties (20 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Tape GFK 50 mm
2 x	Motor DLE 200cc Premium Muffler
1 x	ESC ALPHA 60A HV
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	Small Crow DLE-170M
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Motor DLE 170 M- Paramotors
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
2 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
2 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Landing gear strap large (4 uds)
1 x	Body for landing gear Ø 4 mm
1 x	Battery LiPo GENS 2200 mAh 3S 11.1v 45C (Gens Ace)
1 x	Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace)
1 x	Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace)
1 x	Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x	Foam plastic plates (310x210x2 mm)
1 x	Foreman, scale 1:32
1 x	Adjustable brass horn threaded M3
1 x	MZ-12, 6 Channel HoTT
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Spikes Band (5 m)
1 x	Distanzstück motor OS 120 AX
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Faucet FESTO
1 x	Y-Hose connector 4-4-4mm
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Quick hose connector 6-6 mm
1 x	Y-Hose connector 4mm
1 x	40 mm air cylinder
1 x	Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace)
1 x	Lipo GENS 200 mAh 1s 3.7 45C (2 pcs)
1 x	Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace)
1 x	Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace)
1 x	Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace)
1 x	Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace)
1 x	Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case)
1 x	Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace)
1 x	Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace)
1 x	Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack
1 x	Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace)
1 x	Battery LiPo GEN2700 mAh 3S 11.1v Transmitter Pack (Gens Ace)
1 x	Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace)
1 x	Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace)
1 x	Battery LiPo GENS 5500 mAh 6S 22.2v 45C (Gens Ace)
1 x	Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace)
1 x	Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace)
1 x	Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case)
1 x	Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace)
1 x	Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace)
1 x	Beech dowels 4.0 x 1000 mm
1 x	Flap hinge (6 pcs)
1 x	Decorative caps, multicoloured
1 x	Conector JAPAN G2 Set 5 pares
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Beech dowels 3.0 x 1000 mm
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Transmitter Crystal 35 Mc/s Ch 77
1 x	MZ-18, 9 Channel HoTT
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	MZ-10, 5 Channel HoTT
1 x	PIX Hawk with accesories
1 x	Receiver replacement antenna, approx. 85
1 x	Charger LiPo Charger4
1 x	Hose clips 6 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Quick hose connector 6-4 mm
1 x	Manometer 4 mm
1 x	Propeller hub spacer 8/5.5
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	Blades 330mm
1 x	PPM Encoder Module
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Decorative caps, multicoloured, short
1 x	VITAPROP CARBON FOLDING PROP 15x9.5"
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	18x8 BIELA 3Bl propeller (3-blades)
1 x	FALCON 29X9 CARBON PROPELLER (GAS)
1 x	FALCON 33X11W CARBON PROPELLER (GAS)
1 x	16x10 BIELA propeller (3-blades)
1 x	FALCON 24X9 CARBON PROPELLER (GAS)
1 x	BALSA leading edge 8x10x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x	MEKP Harderner 100 g
1 x	BALSA trip 2.0x2.0x1000 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m

25,101.84EUR