599.88EUR

Esc KOSMIK 160 HV
[KON4816]

With the new KOSMIK KONTRONIK defined a new high-end level. Optimally protected in a plastic case covered by two aluminum plates the KOSMIK conceals its interior: power stability to 200 A and a voltage range up to 14 S. Also included are anti-spark, RC car mode with reverse option and high part load capability even at high power. So the KOSMIK can cope with all requirements you can have for an ESC of superlatives.

The KOSMIK‘s new cooling concept with two aluminium plates and optional heat sinks allows operation at extreme high contiuous current. No other KONTRONIK ESC could ever take that high current.

BEC
One important feature of the KOSMIK is the strongest BEC KONTRONIK has ever developed. With a voltage from 5 V up to 8 V and a current capacity of 7 A continuous and up to 20 A peak the KOSMIK is the ESC for the most demanding tasks. The KOSMIK hast two BEC ports which have to be used when high BEC current is required. The two BEC cables are included in the package.

Screwed instead of soldered
No wires. This is maybe the first thing you notice looking at the new KOSMIK. In order to handle the enormous power the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and forms a reliable high current connection.

Data interfaces
Therefore the KOSMIK, in addition to three connectors for sensors and telemetry, provides a fast micro USB port in order to give out and process operation data.

Mode-Programming
The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. Thus, the ESC is rapidly deployable and can be customized for different applications within the shortest possible time.

PROGDISC compatible
The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows to change individual parameters and helps to adjust the KOSMIK to your personal preferences.

Online updatable
Of course, the KOSMIK is also updatable online. This allows software updates easily set at home. Long downtimes caused by sending and waiting are a thing of the past.

LED
Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support.

Logger
As the first KONTRONIK ESC the KOSMIK offers the possibility of recording operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology.

MicroSD Card
All recorded data are written on a MicroSD card. This enables a flexible analysis of a great data volume.

COOL KOSMIK
If you love style and function, the Cool KOSMIK is made just for you. With an integrated fan combined with an active heat sink, you will find no better cooling solution available. You will immediately notice the stylish design of the integrated cooling plate, and will appreciate the active cooling fan in low airflow situations.

COOL KOSMIK, a design that is made for the most demanding situations.

KOSMIK 160 HV specifications
- 5-14 Lipo, 20-59 V
- 160 A continuous current
- BEC 7 A cont. current
- BEC 20 A peak current
- 108x53x28 mm
- 200 g without cable

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
3 x	SE Ring 450 mm (2 pcs)
2 x	30 cm BEC cable (male)
1 x	Cabel charger transmitter GRAUPNER
2 x	Interface Jack Adapter IKARUS
1 x	Tape GFK 38 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Tape GFK 50 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
2 x	SE Ring 250 mm (2 pcs)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Cabel "Y" 30 cm (graupner)
1 x	4 LiPo XH>EH adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	20x200 mm battery rings
1 x	SE Ring 300 mm (2 pcs)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	White silicone 0,25 qmm wire (150 m)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable Cargador FUTABA
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Interface Realflight Simulator
1 x	White silicone 0,25 mm² wire (25 m)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	GameCommander USB Universal
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
2 x	SE Ring 400 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
2 x	SIMtransmitter 6 Mode 2
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Ring 320 mm length (5 pcs)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	SE Ring 360 mm (2 pcs)
2 x	Slave-cable USB Easy Sim
1 x	Cabel "Y" 30 cm (Futaba)
1 x	2 LiPo XH>EH adapter
2 x	5 LiPo XH>EH adapter
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	Marker ties (20 pcs)
2 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
2 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
2 x	Straightened threaded rod M2-1m
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 6.0 mm x 1000 mm
2 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Para-RC Trike "RC-Bullix"
2 x	Paramotor BackPack XXS 2
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Parachute BACKUP X100
1 x	Paramotor Trike XL
1 x	Rescue 1,8m2 / BackPack
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Premium servo extension 100cm
1 x	45 mm rods + T patellas set for direction control
1 x	Round Rod 5,0x1000 mm
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Mobile Terminal
1 x	1/6 Pilot "John"
1 x	Bearing 3x6x2,5
1 x	PVC red battery termo-retract 68 mm (10 m)
1 x	Red 3m5 mm connector holder
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	SE Ring 350 mm (2 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Welder 100W/200V
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	XH male balance (3S) connector (2 pcs)
1 x	EasyFLY Addon
1 x	Connectors DEANS 4 pins (1 pair)
2 x	NF-3m Heli Kit
1 x	White silicone 0,25 qmm wire (100 m)
1 x	19 mm 2:1 black termoretract tube
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 200 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	2,5x60 mm allen screwdriver
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
2 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	ENIGMA ARF
1 x	BIG MOSNTER
1 x	CYCLONE XT 6.2m ARF
1 x	Aero-Master Cabine (Aero-naut)
1 x	Avia spare blue cockpit (Top Model)
1 x	ACTIVE ARF Electric 1.995 mm
1 x	Gracia (Top Model)
1 x	Fascination 3600 mm, Canopy (Top Model)
1 x	Challenger ARF (Top Model)
1 x	Astra wing Joinner (Top Model)
1 x	HERON RR
1 x	Aero-Master Fuselage (Aero-naut)
1 x	FOX 3000 mm, Fuselage (FMS)
1 x	Fascination 3600 mm, Spare Elevator (Top Model)
1 x	Windsock Ozone L -1200 mm
1 x	Wing OXY 0,5 pulgadas2
1 x	Set cintas unión paracaídas 145 cm
1 x	MAX pilot ARTF
1 x	120x60 mm SLH KOVO wheel
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	EDGE 540-A 105" (2660 mm)
1 x	Esc KOSMIK 200 HV
1 x	KIRA 600-17
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	KIRA 480-31 5,2:1
1 x	FAN KOSMIK
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Set Stickers Ultimatum 2.0 - Andy Folienwelt
1 x	Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x	Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts)
1 x	T-Motor U7-V2.0 Kv420
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Propeller POWER-PROP 13x8
1 x	Propeller POWER-PROP 11x6
1 x	Propeller POWER-PROP 11x8
1 x	NF-3 RC set
1 x	NF-2 RC set
1 x	NF-3XL set
1 x	NF-1 RC set
1 x	Jet Afterburner Simulator NF-Jet1RY Set
1 x	Jet Afterburner Simulator NF-Jet4 RY
1 x	NF-3X-350 set
1 x	Jet Afterburner Simulator NF-Jet3 RY
1 x	NF-3X-80 liner Kit
1 x	Spikes Band (5 m)
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	KIRA 480-38
1 x	Gearbox KPG25 4,2:1
1 x	Grasa 2 ml
1 x	Red 4 mm connector holder
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Adapter SPEED 480 whit axle short

15,252.13EUR