750.00EUR

Esc KOSMIK 200 HV
[KON48201]

With the new KOSMIK KONTRONIK defined a new high-end level. Optimally protected in a plastic case covered by two aluminum plates the KOSMIK conceals its interior: power stability to 200 A and a voltage range up to 14 S. Also included are anti-spark, RC car mode with reverse option and high part load capability even at high power. So the KOSMIK can cope with all requirements you can have for an ESC of superlatives.

The KOSMIK‘s new cooling concept with two aluminium plates and optional heat sinks allows operation at extreme high contiuous current. No other KONTRONIK ESC could ever take that high current.

BEC
One important feature of the KOSMIK is the strongest BEC KONTRONIK has ever developed. With a voltage from 5 V up to 8 V and a current capacity of 7 A continuous and up to 20 A peak the KOSMIK is the ESC for the most demanding tasks. The KOSMIK hast two BEC ports which have to be used when high BEC current is required. The two BEC cables are included in the package.

Screwed instead of soldered
No wires. This is maybe the first thing you notice looking at the new KOSMIK. In order to handle the enormous power the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and forms a reliable high current connection.

Data interfaces
Therefore the KOSMIK, in addition to three connectors for sensors and telemetry, provides a fast micro USB port in order to give out and process operation data.

Mode-Programming
The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. Thus, the ESC is rapidly deployable and can be customized for different applications within the shortest possible time.

PROGDISC compatible
The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows to change individual parameters and helps to adjust the KOSMIK to your personal preferences.

Online updatable
Of course, the KOSMIK is also updatable online. This allows software updates easily set at home. Long downtimes caused by sending and waiting are a thing of the past.

LED
Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support.

Logger
As the first KONTRONIK ESC the KOSMIK offers the possibility of recording operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology.

MicroSD Card
All recorded data are written on a MicroSD card. This enables a flexible analysis of a great data volume.

KOSMIK 200 HV especifications
- 5-14 Lipo, 20-59 V
- 200 A continuous current
- 400 A peak current
- BEC 10 A cont. current
- BEC 30A peak current
- 109.2x53.2x28.6 mm
- 200 g without cable

temporarily out of stock

Reviews

Quick Find

Shopping Cart

3 x	Carbon fiber rod 12 mm x 1000 mm
4 x	Squared carbon wing joinner 5x5x220 mm
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Gates hinge 30x16 mm (2 pcs)
3 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	18 mm reinforced hinge
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	Carbon fiber rod 0.5 mmx1000 mm
3 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Small pinned hinge (12 uds)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	Gates hinge black 30x16 mm (2 pcs)
2 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber rod 2.0 mmx1000 mm
3 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
4 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Flap hinge (6 pcs)
1 x	Gates hinge
4 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	15 mm reinforced hinge
2 x	Micro flex hinge (12 uds)
2 x	Carbon fiber rod 1.5 mm x 1000 mm
3 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Long pinned hinge (6 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
3 x	Carbon fiber rod 20 mmx1000 mm
1 x	Gates hinge aluminium (1 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 400 mm (2 pcs)
2 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 200 mm (2 pcs)
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	Cinta Goldfix 1m
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	LED wire (rojo - 2pcs)
2 x	LED blink wire flashing (green - 2pcs)
2 x	LED wire (white - 2pcs)
1 x	LED wire (blue - 2pcs)
1 x	LED blink wire flashing (orange - 2pcs)
2 x	LED wire (orange - 2pcs)
2 x	Silent-blocks DLE 170M
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
2 x	Motor DLE 200cc Std
2 x	Screw-lock connector M2 (2 uds)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	1/6 Pilot "Garry"
1 x	1/6 Pilot "John"
1 x	Glases Nimbus
1 x	Conector BEC female (10 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Profile ABS triangular 4.0x1000 mm 90º
2 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Large flex hinge (12 uds)
3 x	LED lighting system High Power
1 x	Big Crow DLE-170M
1 x	Motor DLE 170 M- Paramotors
1 x	Blades 330mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Ring 320 mm length (5 pcs)
2 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	XH female balance (8S) connector (2 pcs)
1 x	KAVAN Hand crank fuel pump
1 x	Electric spoiler 250 mm (2 pcs)
1 x	JM electric Pump
1 x	Connectors DEANS (T) micro
1 x	Conector JR Servo male (10 pcs)
1 x	Magnetic Connect locking system
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm
1 x	One touch canopy lock
1 x	Locking cable tie 3.2x142 (uds)
1 x	Cockpit plastic closing
1 x	Steering arm 12 mm Ø 4 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 38 mm
1 x	LED blink wire flashing (blue - 2pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Tape GFK 50 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Motor DLE 200cc Premium Muffler
2 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
3 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Long pinned hinge (12 uds)
1 x	Flap hinge 33x9 mm (6 pcs)
2 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Secraft Fuel system v2, red color
2 x	Carbon fiber rod 14 mmx1000 mm
2 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	Battery plate
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Connectors banna oro 2 mm (M/F)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x	Gold antispark 4 mm plug
1 x	Optotronix Aurora Plug
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	LiPo TopFuel ECO-X 5800mAh 2s 20C MTAG
1 x	Pushrod octagone 4/3 with coupler M3
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Pushrod octagone 3/2
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	TopFuel LiPo 25C-ECO-X 350mAh 2S
1 x	Allen wheel collar M3x3
1 x	TopFuel LiPo 20C-ECO-X 4500mAh 6S MTAG
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Landing gear frontal support 29x26x13,5
1 x	TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG
1 x	Aluminun wheel collar 4 mm Ø (4 uds)

12,661.09EUR