660.00EUR

Esc KOSMIK 160+ HV COOL
[KON48161]

With the new KOSMIK KONTRONIK defined a new high-end level. Optimally protected in a plastic case covered by two aluminum plates the KOSMIK conceals its interior: power stability to 200 A and a voltage range up to 14 S. Also included are anti-spark, RC car mode with reverse option and high part load capability even at high power. So the KOSMIK can cope with all requirements you can have for an ESC of superlatives.

The KOSMIK‘s new cooling concept with two aluminium plates and optional heat sinks allows operation at extreme high contiuous current. No other KONTRONIK ESC could ever take that high current.

BEC
One important feature of the KOSMIK is the strongest BEC KONTRONIK has ever developed. With a voltage from 5 V up to 8 V and a current capacity of 7 A continuous and up to 20 A peak the KOSMIK is the ESC for the most demanding tasks. The KOSMIK hast two BEC ports which have to be used when high BEC current is required. The two BEC cables are included in the package.

Screwed instead of soldered
No wires. This is maybe the first thing you notice looking at the new KOSMIK. In order to handle the enormous power the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and forms a reliable high current connection.

Data interfaces
Therefore the KOSMIK, in addition to three connectors for sensors and telemetry, provides a fast micro USB port in order to give out and process operation data.

Mode-Programming
The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. Thus, the ESC is rapidly deployable and can be customized for different applications within the shortest possible time.

PROGDISC compatible
The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows to change individual parameters and helps to adjust the KOSMIK to your personal preferences.

Online updatable
Of course, the KOSMIK is also updatable online. This allows software updates easily set at home. Long downtimes caused by sending and waiting are a thing of the past.

LED
Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support.

Logger
As the first KONTRONIK ESC the KOSMIK offers the possibility of recording operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology.

MicroSD Card
All recorded data are written on a MicroSD card. This enables a flexible analysis of a great data volume.

COOL KOSMIK
If you love style and function, the Cool KOSMIK is made just for you. With an integrated fan combined with an active heat sink, you will find no better cooling solution available. You will immediately notice the stylish design of the integrated cooling plate, and will appreciate the active cooling fan in low airflow situations.

COOL KOSMIK, a design that is made for the most demanding situations.

KOSMIK 160+ HV COOL specifications
- 5-14 Lipo, 20-59 V
- 160 A continuous current
- BEC 7 A cont. current
- BEC 20 A peak current
- 108x53x28 mm
- 200 g without cable

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Field folding model stand SebArt
1 x	Propeller balancer
1 x	Field folding model stand
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Angle of incidence meter
1 x	Propeller balancer
1 x	WingFix ULTRA Black Edition
1 x	ORACOVER Ferrari red (2 m)
1 x	Oracover ROYAL RED 2m
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Oracover Azul Cielo 2 m
1 x	Oracover Yellow CADMIO 10 m
1 x	Oratex Yellow Cub 10 m
1 x	Oratex Antik 2m
1 x	Oratex Red Fokker 10 m
1 x	Oracover Yellow CUB 10 m
1 x	SE Ring 480 mm (2 pcs)
1 x	Oracover CARBON Metalic 1 m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	MYLAR film A350 (1000x500 mm)
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 400 mm (2 pcs)
1 x	Ply-Span 450x600/13g White
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Oracover Red 2 m
2 x	SE Ring 300 mm (2 pcs)
2 x
1 x	Oratex White 2m
1 x	ORACOVER Fluor red (2 m)
1 x	Foil for sticking flaps and ailerons
2 x	PROFICOVER 5m
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 38 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Ply-Span 450x600/13g Yellow
1 x	Ply-Span 450x600/13g Black
1 x	Oracover White 2 m
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Oracover CHROME 2m
1 x	SE Ring 200 mm (2 pcs)
1 x	Oratex Natural White 2m
1 x	Tape GFK 25 mm
1 x	Spikes Band (5 m)
1 x	Tape GFK 50 mm
1 x	Oracover Yellow CUB 2 m
1 x	SE Ring 360 mm (2 pcs)
1 x	Oracover Brown 2 m
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Oracover Yellow CADMIO 2 m
1 x	ORACOVER transparent Yellow (10 m)
2 x	Ply-Span 450x600/13g Blue
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	6 mm aluminium horn with patella
1 x	Cable with accesories
1 x	6 mm blue aluminium threaded horn with patella
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Horn with ball 40x30
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Horn with ball 55x40
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Horn 6/35 with M3 Bearing
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
2 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Cable Cargador FUTABA
1 x	Horn 5/20 with M2 Bearing
1 x	6 mm red aluminium threaded horn with patella
2 x	Threaded coupler ALU M2 Ø 3 (2 uds)
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Horn for flap control (1 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	5 line servos wire black (1 m)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Extension silicon 35 cm male (Futaba)
1 x	Optical RPM Sensor
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Oracover Verde 2 m
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	White silicone 0,25 mm² wire (25 m)
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Micro control horn T2 Ø 1
1 x	Rudder forward 70x28 "type Kato"
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Yellow silicone 0,5 qmm wire (50 m)
1 x	Rudder forward 90x28 "type Kato"
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Silicone red 2,5 qmm wire ( 1 m)
1 x	Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	RH long aluminium horn (2pcs)
2 x	Silicone red 6,0 qmm wire ( 1 m)
1 x	SlowFlyer control horn (3 pcs)
1 x	Short adjustable control horn 3x24
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	Long horn 50x26
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
2 x	Silicone red 1,0 qmm wire ( 1 m)
1 x	Silicone red 1,5 qmm wire ( 25 m)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Silicone red 1,0 qmm wire (100 m)
2 x	White silicone 0,25 qmm wire (150 m)
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Surface Indicator Gauge Small
1 x	Medidor ángulos y/o incidencias
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	20x200 mm battery rings
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Oracover Green10 m
1 x	XH female balance (5S) connector (2 pcs)
1 x	XH male balance (7S) connector (2 pcs)
1 x	Servo Connector Brackets (10 pcs)
1 x	XT-30 connector (pair)
1 x	XH male balance (8S) connector (2 pcs)
1 x	XH male balance (6S) connector (2 pcs)
1 x	XH female balance (4S) connector (2 pcs)
1 x	XH male balance (4S) connector (2 pcs)
1 x	XH female balance (6S) connector (2 pcs)
1 x	LASER 73" 1.85m (05) PILOT
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Red 4 mm connector holder
1 x	XH female balance (8S) connector (2 pcs)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	XH male balance (5S) connector (2 pcs)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	KIRA 500-30 6,7:1
1 x	FAN KOSMIK
1 x	KIRA 480-26 5,2:1
1 x	Xoar Electric Beechwood Prop 24x8
1 x	KIRA 480-34

5,948.20EUR