699.90EUR

Esc KOSMIK 200+ HV
[KON4820]

With the new KOSMIK KONTRONIK defined a new high-end level. Optimally protected in a plastic case covered by two aluminum plates the KOSMIK conceals its interior: power stability to 200 A and a voltage range up to 14 S. Also included are anti-spark, RC car mode with reverse option and high part load capability even at high power. So the KOSMIK can cope with all requirements you can have for an ESC of superlatives.

The KOSMIK‘s new cooling concept with two aluminium plates and optional heat sinks allows operation at extreme high contiuous current. No other KONTRONIK ESC could ever take that high current.

BEC
One important feature of the KOSMIK is the strongest BEC KONTRONIK has ever developed. With a voltage from 5 V up to 8 V and a current capacity of 7 A continuous and up to 20 A peak the KOSMIK is the ESC for the most demanding tasks. The KOSMIK hast two BEC ports which have to be used when high BEC current is required. The two BEC cables are included in the package.

Screwed instead of soldered
No wires. This is maybe the first thing you notice looking at the new KOSMIK. In order to handle the enormous power the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and forms a reliable high current connection.

Data interfaces
Therefore the KOSMIK, in addition to three connectors for sensors and telemetry, provides a fast micro USB port in order to give out and process operation data.

Mode-Programming
The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. Thus, the ESC is rapidly deployable and can be customized for different applications within the shortest possible time.

PROGDISC compatible
The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows to change individual parameters and helps to adjust the KOSMIK to your personal preferences.

Online updatable
Of course, the KOSMIK is also updatable online. This allows software updates easily set at home. Long downtimes caused by sending and waiting are a thing of the past.

LED
Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support.

Logger
As the first KONTRONIK ESC the KOSMIK offers the possibility of recording operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology.

MicroSD Card
All recorded data are written on a MicroSD card. This enables a flexible analysis of a great data volume.

KOSMIK 200+ HV especifications
- 5-14 Lipo, 20-59 V
- 200 A continuous current
- BEC 10 A cont. current
- BEC 30A peak current
- 108 x 53 x 28 mm
- 200 g without cable

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	SE Ring 450 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Tape GFK 50 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
2 x	SE Ring 250 mm (2 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Marker ties (20 pcs)
1 x	Tape GFK 25 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 330 mm (4 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Screw-lock connector M2 (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Canopy Latch
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	SUS wire 3m (nylon coated)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Locking cable tie 4.6x203 (uds)
1 x	CC 03
2 x	2 LiPo XH>EH adapter
2 x	5 LiPo XH>EH adapter
1 x	Smoke set "S"
1 x	TrainerCord (master-learner)
1 x	Electric rocket starters (6 pcs)
2 x	Red smoke bombs AX-60 (5 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Parachute expulsion foam
2 x	Yellow smoke canister 140 g
1 x	30 cm BEC cable (male)
1 x	"M" set
1 x	"S" set for planes
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
2 x	AX-60 starters (5 pcs)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	3 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	White smoke canister 100 g
1 x	Yellow smoke canister 65 g
2 x	APM2.6 Power module with 5.3V DC BEC
1 x	Adapter lead MPX/EC3
1 x	Cabel charger transmitter GRAUPNER
2 x	Yellow smoke canister 100 g
1 x	Ventral support for AX-18/AX-60
1 x	AX-60 starters (5 pcs)
1 x	Red smoke canister 140 g
2 x	B4-0 rocket charges (6 pcs)
1 x	JETImodel SINGLE BEC
1 x	MPX-Dean "T" Adapter
2 x	Remote electric ignition system
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	Black smoke bombs AX-60 (5 pcs)
1 x	3l Smoke oil
1 x	Initior Transmitter FTX2 Wireless
1 x	TP/TopFuel - JST-EH 4/5S Adapter
2 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	CM-3
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
3 x	Smoke set "M"
2 x	CC 01
1 x	Green smoke canister 100 g
1 x	Blue smoke canister 140 g
1 x	Red smoke canister 65 g
1 x	Red smoke canister 100 g
2 x	Adjustable launching hook
1 x	SERVO HOLDER
2 x	Towing hook
1 x	White silicone 0,25 mm² wire (25 m)
1 x	L-Connector 1.5 mm x 1000 mm
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Profile ABS Square 2 x 1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	5 line servos wire black (1 m)
2 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	200m servo "Premium" wire (white/red/blue)
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
2 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	50m servo "Premium" wire (white/red/blue)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Aramid 50 daN 50 m
1 x	Opto Gas Engine Kill Switch
1 x	SE Ring 400 mm (2 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Green smoke canister 140 g
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	White smoke canister 65 g
1 x	Selfstart electronic switch
1 x	Smoke set "Glider"
1 x	PowerBox SparkSwitch RS
1 x	SBEC 30 D
1 x	Multi-adapter balancer JST - TP
1 x	PCARD Wireless System
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Secraft Fuel system v2, red color
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
2 x	BEC 3A FOXY
1 x	Receiver bed (Blue)
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Servo Mount M (blue)
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Motor mount M
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	CC 05
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	USB HLS prog. interface
1 x	Jet Afterburner Simulator NF-Jet3 RYS
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x	Silicone red 1,0 qmm wire ( 1 m)
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	NF-2 RC set
1 x	Jet Afterburner Simulator NF-Jet4 RY
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	Cable set PREMIUM, fuselage/wing
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	NF-3m Heli Kit
1 x	Universal batery Tester
1 x	SE Ring 240 mm (2 pcs)

7,884.04EUR