199.90EUR

Wingstabi 9 DR M-Link Receiver
[MU55013]

Freely programmable triple-axis gyro system for all RC fixed-wing model aircraft

Every pilot dreams of having the sensation of perfect control over his model at all times. The WINGSTABI makes this possible, and ticks every possible box for beginners and pro-standard flyers alike in terms of handling, setting up and functions.

These pioneering innovations are only available from MULTIPLEX:
- The WINGSTABI makes any simple radio control set into a fully programmable RC system
- Gain (sensitivity) on all three axes can be varied separately or jointly from the transmitter
- Variation factor can be set separately for each axis
- 7 / 9 servo outputs
- The gyro function is freely assignable for each servo, i.e. the unit caters for every model application
- Four flight phases:
     1. On / Off
     2. Stabilisation for flying in windy conditions
     3. Aerobatics and 3D flying
     4.Torque-rolling (rock'n'roll at the flying site)
- Delta mixer, V-tail mixer and flap support
- Flaps can be set to amplify aileron response
- Real-time sensor diagram in the PC software

The WINGSTABI is also compatible with all current RC systems: Graupner, Futaba, M-Link, Jeti, HiTEC, Weatronic and others. The latest generation of ultra-precise triple-axis MEMS sensors ensures that the sensation of flying remains realistic even at extremely high rates of stabilisation, and the pilot never has the impression of flying a robot. The sleek case, made of anodised aircraft aluminium, can be installed in any orientation in the model. The WINGSTABI is straightforward and swift to program using a PC or an app with any Android smartphone or tablet.

Incidentally, the WINGSTABI is also available with a telemetry-capable M-M-LINK DR receiver integrated into the case. This not only saves space and weight, but also minimises potential sources of error. Enhanced security!

Contents:
WINGSTABI RX-9-DR M-LINK with integral 9-channel receiver, instructions, 2 x adhesive pad, 32 x 52 mm, USB-PC-lead (UNI)

Specification
- Servo channel count: 9
- Reception system: 2.4 GHz FHSS (Frequency Hopping Spread Spectrum)
- Operating voltage: 3.5 V … 9.0 V
- Power supply: 4–5 NiXX cells, 2S LiPo/LiIo
- Permissible operating temperature range: - 20°C … + 55°C

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
2 x	PropCover 16-20" (1 pcs)
2 x	20,5x14,5 Falcon electric V2 (40 g)
2 x	Steering arm 16 mm Ø 3 mm
1 x	Screw-lock connector Ø 2 mm (2 uds)
4 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x	Cap closure 33/23.5mm (2 uds)
3 x	BALSA trip 5.0x5.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
3 x	BALSA trip 4.0x4.0x1000 mm
2 x	Locking cable tie 2.5x100 (uds)
2 x	Pine wood slat 3.0x5.0x1000 mm
2 x	20x13 Falcon electric carbon prop (64g)
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Covered closure or fairings
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
2 x	Steering arm 12 mm Ø 4 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Cierre cabina aluminio Ø4, I=10 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Cabin latch Fox MDM1 4m (pair)
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Locking cable tie 3.2x142 (uds)
2 x	Beech dowels 3.0 x 1000 mm
3 x	Propeller 12x6 Falcon electric
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Beech dowels 2.0 x 1000 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
3 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Linden wood slat 2.0x2.0x1000 mm
3 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	Canopy Latch
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Stainless steel cable Ø 0.5 mm (20 m)
3 x	BALSA triangular 15x15x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
2 x	Electric spoiler 250 mm (2 pcs)
2 x	Beech dowels 10 mm x 1000 mm
1 x	Propeller balancer
2 x	Field folding model stand SebArt
1 x	Angle of incidence meter
2 x	WingFix ULTRA Black Edition
1 x	Extractor piñones 2.3/3.2 mm
2 x	Truck-trailer for gliders 720 x 285 mm
1 x	Angle measurer
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Propeller APC 10x5 Electric Pusher
1 x	Parachute P4
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Xoar Electric Beechwood Prop 24x8
1 x	Screw-lock connector M2 (2 uds)
1 x	SUS wire 3m (nylon coated)
2 x	PropCover 16-20" (2 pcs)
2 x	Wheel collar 5 mm Ø (4 uds)
3 x	28x5 mm wires output (2 pcs)
2 x	Balsa panel 1.0x100x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
3 x	Balsa panel 1.5x100x1000 mm
2 x	Allen wheel collar M4x6
2 x	Birch plywood plate 600x300x4.0 mm
2 x	Birch plywood plate 600x300x2.0 mm
3 x	Steering arm 12 mm Ø 3 mm (2 uds)
2 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Control for forward wheel (MINI)
2 x	Cable grommet 9.5 mm (4 uds)
1 x	Split pin 1.6x16 mm (10 uds)
2 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	FIALA Propeller 23x8 Electric
2 x	BALSA triangular 6x6x1000 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
2 x	USB Mini Camera endoscope
1 x	Propeller POWER-PROP 7x7
2 x	BALSA trip 10x10x1000 mm
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	800TVL CMOS camera for FPV
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 200cc Std
1 x	Manometer 4 mm
2 x	Cockpit plastic closing
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x	DG-303 ACRO 3750 mm, canopy
1 x	Gracia (Top Model)
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Medidor ángulos y/o incidencias
1 x	Propeller balancer
1 x	Birch plywood plate 600x300x2.5 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Balsa panel 10x100x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	20x15 Falcon electric V2
1 x	Landing gear frontal support 29x26x13,5
1 x	41x5,5 mm wires output (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
2 x	Tip wing protector 30x10 (2 pcs)
1 x	Allen wheel collar M3x3
1 x	Lead with adhesive (2 pcs)
1 x	Window mounting channel 5m
1 x	Split pin 1x8 mm (10 uds)
1 x	Snap pin for micro clevis (10 uds)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	FOX 3000 mm ARF (FMS)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	FOX 3000 mm, Fuselage (FMS)
1 x	ENIGMA ARF
1 x	Albatros ,spare cockpit (Top Model)
1 x	Challenger ARF (Top Model)
1 x	Aero-Master Wings (Aero-naut)
1 x	Fascination 3600 mm (Top Model)
1 x	Electric spoiler 185 mm (2 pcs)
1 x	FANTASY ARF 3.2m
1 x	Avia (Top Model)
1 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	FANTASY ARF 3.0m, Fundas alas
1 x	Avia spare blue cockpit (Top Model)
1 x	Aero-Master Fuselage (Aero-naut)
1 x	Motor Moki S 500 cc 5 cylinders
1 x	Moki Pushrod S250 (1 pcs)
1 x	Propeller APC 10x4.5 MR
1 x	Propeller APC 10x5.5 MR Electric multirrotor
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Clip fixing for wing (2 pcs)
1 x	USB Charger 12V DC for car
1 x	VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x	PROFI TX fastening rings

18,468.85EUR