1 x | BLUE Colored Liquid smoke for turbine 0.75 l |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Turbine KingTech K30G Restart |
1 x | Battery LiFe -2100/25C-3S 9.9V |
1 x | Turbine KINGTECH K85 G4 |
1 x | Turbine KingTech K45G4+ |
1 x | Kerostarter K30G |
1 x | GSU Kingtech |
1 x | Turbina KINGTECH K120 G4 |
1 x | KingTech Turbineoil 5L |
2 x | Turbine KINGTECH K160 G4 |
1 x | KingTech Turbineoil 1L |
1 x | Battery LiFe -1450/25C-3S 9.9V |
1 x | Turbina KINGTECH K180 G4+ |
1 x | FOD Screen K140G/K180G/K210G |
1 x | Turbina KINGTECH K70G4 |
1 x | Scale exhaust K45TP |
3 x | Burner Plug K30/ K45 |
1 x | Turbina KINGTECH K142 G4M |
1 x | KingTech Turbineoil 10L |
2 x | Propeller POWER-PROP 14x9 Izda |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Short ball link M2 (6 uds) |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Hot Glue Stick RED |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | SE Ring 200 mm (2 pcs) |
2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Cinta Goldfix 1m |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
2 x | DYNAMOMETER S-1580 |
1 x | SE Ring 360 mm (2 pcs) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | 1/6 Pilot "Cindy" |
2 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Threaded coupler M3 (10 uds) |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Piloto JET 1:3,5 |
3 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Telemetria XYCOY adapter |
1 x | Turbina X132 H "Light Version" |
1 x | Horn 5/20 with M2 Bearing |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Ferrita con funda |
1 x | Horn for flap control (1 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Turbina JetsMunt VT98 NG |
1 x | Aceite AEROSHELL 500 SE Turbina 0,9 kg |
1 x | Oracover light Grey 2m |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Screwdriver for Torx® TX8 |
1 x | Filter KingTech |
1 x | FOD Screen K45/60/70/85 |
2 x | Propeller POWER-PROP 12x8 |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
3 x | 5 mm Prop Adapter M6 |
2 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
2 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | Cable coupler M3 (10 uds) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Wire easy tensioner (red) |
2 x | Cable coupler M2 (10 uds) |
1 x | Pulley brass 8/2 (2 pcs) |
2 x | Threaded coupler M2,5 (10 pcs) |
2 x | Cable coupler M3 (10 uds) |
2 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Small aluminium horn red (2pcs) |
1 x | Surface Indicator Gauge Small |
2 x | 300 Newtons FEMA absorber |
2 x | Propeller POWER-PROP 12x6 |
2 x | Propeller POWER-PROP 13x9 Izda |
1 x | Field folding model stand |
1 x | Porpeller HUNTER 480 |
2 x | Propeller electric carbon 9.5x5 |
2 x | Propeller electric carbon 8.5x6 |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | 6 mm Prop Adapter M8 |
1 x | Tail wheel for 5-8 kg models |
1 x | Tailwheel for 40/90 size |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
2 x | Fiberglass tube 6/4x1000mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Tail wheel for 8-12 kg models |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
2 x | 2,3 mm Prop Drive Günther M4 |
2 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
2 x | Tail gear set (60-120 class) |
1 x | 5 mm Prop Adapter M8 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Tren de cola carbono 50-70cc |
3 x | GPS, Vario and altitude Sensor SBS-01G |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
2 x | 2 mm Prop Adapter M5 |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
2 x | 3 mm Long Prop Adapter M5 |
2 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Tailwheel for F3A size |
2 x | 3 mm Short Prop Adapter M5 |
2 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
2 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Couple M4 for wire (10 pcs) |
2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Angled clevis with threaded rod M3 |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | wire tensioner (black) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
2 x | wire tensioner (silver) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Cable coupler M2 (10 uds) |
2 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
2 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Round Rod 1.0x3.5 cm |
1 x | Horn with ball 55x40 |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horns indoor |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Adjustable brass horn threaded M3 |
1 x | Round Rod 5,0x1000 mm |
1 x | Horn 6/35 with M3 Bearing |
2 x | 6 mm aluminium horn with patella |
1 x | 5 mm M2 variable inclined horn |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Extra long horn 60x30 |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Oracover Black 2 m |
1 x | Oratex Natural White 2m |
1 x | Oratex Silver 2m |
1 x | Screwdriver for Torx® TX6 |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Round Rod 6,0x1000 mm |
2 x | 2,3 mm Prop Adapter M5 |
1 x | Ply-Span 450x600/13g White |
1 x | Oratex Antik 2m |
1 x | Motor Mount for Multiplex FunJet |
1 x | ARTIST 1.560 mm |
1 x | Decorative caps, multicoloured |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Sparkplug DLE CM6 |
1 x | Sparkplug 1/4-32 Glow |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller electric carbon 10x6 |
1 x | Propeller POWER-PROP 14x9 |
1 x | Porpeller HUNTER 400 |
1 x | Propeller electric carbon 6.5x4 |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
2 x | DUPLEX 2.4EX Central Box 210 |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Aluminium ignition bad (red) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Tygon DUBRO Medium 15m |
1 x | DLE 55 carburetor |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | Junta humo metalica G35 DLE35 |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Metal clevis M3 (10 uds) |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
3 x | 28 mm tailwheel unit |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Challenger ARF (Top Model) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Propeller POWER-PROP 10x6 |
1 x | Propeller electric carbon 10x8 |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller POWER-PROP 11x9 |
1 x | 100 Newtons FEMA absorber |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
2 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | Starter EM Gear Power 250 |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | Pitts Muffler kit for CAP 21 |
1 x | Starter EM Gear Power 80 |
1 x | Wire easy tensioner (silver) |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | FESTO Filter 6 mm |
1 x | wire tensioner (red) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | KAVAN Hand crank fuel pump |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Micro clevis (10 uds) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Albatros red/white (Top Model) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Bidule 55 V3 2460 mm |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Astra (Top Model) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Charger LiPo Charger4 |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Bidule 55 2460 mm Cabina |
1 x | 11 mm wing servo holder |
1 x | Bidule 111 3000 mm Canopy |
1 x | PowerBox VRegulador 6.0v |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Canopy Astra |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | Turbo light spinner cap white 32mm |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | Spark motor OS Type F |
1 x | Sparkplug Saito 400 |
1 x | Cotton Flocks, bag/ 7 Kg |
1 x | Bujia OS G5 gasolina |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Propeller POWER-PROP 10x7 |
1 x | Propeller POWER-PROP 16x10 |
1 x | Dumper propeller 6/8 mm |
1 x | Propeller electric carbon 7x7 |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Propeller electric carbon 9.5x7 |
1 x | Propeller POWER-PROP 15x10 |
1 x | Propeller POWER-PROP 13x9 |
1 x | Propeller electric carbon 10.5x6 |
1 x | Propeller electric carbon 8.5x5 |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller electric carbon 9.5x6 |
1 x | Propeller POWER-PROP 13x8 |
1 x | Propeller electric carbon 10.5x7 |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | 150 Newtons FEMA absorber |
1 x | 400 Newtons FEMA absorber |
1 x | Absorver mount set for 5-10 Kg models |
2 x | DUPLEX 2.4EX Central Box 320 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | 200 Newtons FEMA absorber |
1 x | Tailwheel for 60/120 size |
1 x | GPS Sensor + Logger OPTronics |
1 x | BALSA trip 10x10x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | MR30 connector male |
1 x | Optical RPM Sensor |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
2 x | Giant Scale Muffler D.A. 70 |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Small kwik link (10 pcs) |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Racor 2/3 mm |
1 x | Threaded coupler M2 (10 uds) |
1 x | Extension Arm for Carburetor (red) |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | Quick hose connector 3-3 mm |
1 x | EME 55 cc carburetor WALBRO |
1 x | DLE 30 complete electronic ignition |
1 x | Variable Flow Smoke Pump System |
1 x | FESTO connector M7 Quick 4 mm |
1 x | FESTO connector M7 Quick 6 mm |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | wire tensioner (blue) |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | FESTO Blanking plug G1/8 |
1 x | Recess mount-rem. glow plug set |
1 x | Quick hose connector 3-3 mm |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | Deposito DUBRO 1800cc-60oz |
1 x | Reed valve for DA 50-R |
1 x | Quick hose connector 4-3 mm |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Compact on-board starting system (9724) |
1 x | Secraft Fuel system v2, red color |
1 x | Compact on-board starting system (9525) |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Compact on-board starting system (9512) |
1 x | Quick hose connector 4-4 mm |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | Compact on-board starting system (9715) |
1 x | Hose clips 6 mm |
1 x | Spring Clip Ø25 mm |
1 x | Selfstarr EME35 |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | Deposito DUBRO 360 ml - 12 oz |
1 x | JM electric Pump |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Gasket electric Fuel Pump |
1 x | Opto Gas Engine Kill Switch |
|
44,777.86EUR |