1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Glases Nimbus |
2 x | ABS tube 8.0x6.0x1000 mm |
3 x | Strip 2,0x2,0x330 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Digital scale up to 40 kg |
1 x | Green smoke canister 140 g |
3 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | 3l Smoke oil |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Dremel PERMAGRIT thin lime |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Smoke set "Glider" |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Blue smoke canister 100 g |
4 x | Round Rod 1,25x1000 mm |
1 x | Optical RPM Sensor |
1 x | ABS Strip 1.0x3.0x1000 mm |
4 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
3 x | Strip 2,5x1,25x330 mm |
1 x | Head Gasket 30cc (3 pcs) |
1 x | Cotter MVVS 45/50/58 cc |
1 x | Round Rod 6,0x1000 mm |
3 x | Strip 3,5x1,75x330 mm |
2 x | ABS Strip 1.0x5.0x1000 mm |
3 x | Strip 1,5x1,5x330 mm |
2 x | Piston ring for motor 58/116 cc |
2 x | Round Rod 2,5x1000 mm |
4 x | Strip ABS 2.0x10.0x1000 mm |
1 x | DYNAMOMETER S-1580 |
2 x | Round Rod 4,0x1000 mm |
3 x | ABS Strip 1.0x4.0x1000 mm |
2 x | Round Rod 5,0x1000 mm |
4 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
2 x | Round Rod 1,0x1000 mm |
2 x | Round Rod 2,0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
2 x | ABS Strip 1.5x8.0x1000 mm |
3 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
3 x | Flap hinge (6 pcs) |
4 x | Flat Connector 4.0 mm x 1000 mm |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Tape GFK 25 mm |
2 x | Oracover Orange 2 m |
1 x | Gold antispark 5,5 mm plug |
2 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Glases Stratus |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
3 x | Rear bearing for motor 35/40 cc |
3 x | ABS Strip 1.5x2.0x1000 mm |
2 x | Strip ABS 2.0x5.0x1000 mm |
2 x | ABS Strip 1.0x2.0x1000 mm |
3 x | ABS Strip 1.5x6.0x1000 mm |
4 x | ABS I Strip 10x5x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Initior Receiver FRX2 Wireless |
2 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Balsa panel 4.0x100x1000 mm |
3 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Tape GFK 38 mm |
1 x | Ball Link Plier |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Horn 6/27 with M3 Bearing |
1 x | Motor EME 35 cc with electric starter |
2 x | Glases Nimbus "Black" |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Tape GFK 50 mm |
2 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Motor EME 35 cc |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | L-Connector 4.0 mm x 1000 mm |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Pitts Mufflers EME 55/60 cc |
1 x | ESC RAY G2 R-60SB SBEC |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Cockpit metalic closing |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
1 x | Ball Link Plier |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | Yellow smoke canister 140 g |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Glases Moritz |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Oracover Verde 2 m |
1 x | One touch canopy lock |
1 x | 1,5x50 mm allen screwdriver |
1 x | ABS angle 10,0x10,0x1000 mm |
2 x | Short ball link M1.6 (6 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Vest clothes Hispano Aviación |
1 x | Program Card G2 RAY |
1 x | Solid Headers for Single Cylinder DA-60 Solid 50mm drop |
1 x | Conector BEC female (10 pcs) |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Indoor hinge with servo arm integraded |
3 x | Extractor piñones 2.3/3.2 mm |
1 x | Glases Aspen |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Medium pin type hinge (12 uds) |
2 x | Long pinned hinge (12 uds) |
1 x | Universal Colour Paste deep black 250 g |
1 x | Pick up EME 55/60 cc |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Propeller pad and output shaft EME 55/60 cc |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Cut tube |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Windsock Ozone L -1200 mm |
1 x | Softshell Hispano Aviación |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Stick coupler Ms 15 mm |
1 x | EME ignition free wheel |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Ball link M3 (10 pcs) |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Ball link M1.6 (6 uds) |
1 x | Cinta Goldfix 1m |
1 x | Long ball link M3 (6 uds) |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Stainless Steel Bend D 25x0,5mm |
3 x | Pine wood slat 10x10x1000 mm |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Stainless Steel Muffler D.A. 50/100/120 |
2 x | Motor mount for 1200 mm models |
1 x | Pilot "Goose" (Slimline) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Frontal support Speed 400/480 |
2 x | Parachute BACKUP X100 |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Parachute PV6 for F3J |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Motor EME 70 cc |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
2 x | Motor EME 70 cc with autostarter |
1 x | Large flex hinge (12 uds) |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Piston ring EME 35cc |
2 x | Gates hinge |
1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Propeller hub EME 60cc |
1 x | Head core |
4 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Coupling for 5 mm axis |
1 x | Komet Pump |
1 x | Rear cover O-ring 26/30 cc |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Battery LiPo GENS 6000 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Glases Flitemaster |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Digital precision scale up to 2000 g |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Propeller APC 11x7 SF |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | SD HC 8 GB |
1 x | Woodruff key for DA50/85/100/150 and DA 200 |
1 x | Motor EME 60 cc with electric starter |
1 x | Complet landing gear |
1 x | 6 mm aluminium horn with patella |
1 x | Reed valve for DA 50-R |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Stainless steel silencer for DA 150/150L |
1 x | BALSA triangular 15x15x1000 mm |
1 x | XT-90 connector (pair) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Spinner 104x131 mm 115 g CFK-BS |
2 x | Micro flex hinge (12 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | CDI EME 120cc |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Parachute P4 |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Selfstarr EME35 |
1 x | Hobbylite Filler, Balsa colour |
1 x | ODYSSEY Blue ARF 2190 mm |
1 x | Angle measurer |
1 x | Battery LiPo TATTU 2300 mAh 3S 11,1V 45C |
1 x | Silicone red 0,5 qmm wire ( 25 m) |
3 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Oracover Red 2 m |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Rubber profile 10-2 mm 2M |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | EC-Cutter |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Steel cylinder screw DA50/60/100/120 |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | Propeller RABOESCH M5 80 mm (4 Blades) (Left hydropropeller) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Battery LiPo TATTU R-Line 1550 mAh 4S 14,8V 95C |
1 x | 290x4 mm M4 shaft ship |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
3 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Universal Colour Paste white 50 g |
1 x | Engine Kolm BX-155-2 with starter |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Spinner 115 mm GFK |
1 x | Battery LiPo TATTU 1300 mAh 4S 14,8V 75C |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Propeller APC 10x4.7 SF |
1 x | Piston ring for DA-150 |
1 x | Receiver bed (Blue) |
1 x | 1/6 Pilot "Garry" |
1 x | Central support Speed 280 |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | 1/7 Pilot "Japanese" |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | 1/6 Pilot "Buddy" |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Tank Kevlar ASPIRE 6 L Kero |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | 38 mm fenders (10 pcs) |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | Ply-Span 450x600/13g White |
1 x | Ball joint long |
2 x | Straightened threaded rod M3 - 1m |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace) |
1 x | Silencer with rear exhaust DA-120 |
1 x | Oratex White 2m |
1 x | Coupling for 3,2 mm axis |
1 x | Spinner 90 mm CFK |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Horn with ball 40x30 |
2 x | Paramotor BackPack XXS 2 |
2 x | 22m Fitting barb |
1 x | Propeller RABOESCH.Ms 70L (5 Blades) (Left hydropropeller) |
3 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Spinner 105 mm CFK |
2 x | Protective Cover for wires Ø 20 mm 1000 mm |
2 x | Anchor 80 mm (2 uds) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
2 x | Motor OS 3820-1200 electric |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
2 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Piston EME 35cc |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Me-163 |
1 x | Piston ring for DA-50R and DA-100 |
1 x | 5 mm Prop Adapter M8 |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Sheave Pl. 1R. 3 mm |
1 x | 1/4 Pilot "Mike" |
1 x | Servos security connector (2 pcs) |
1 x | Cable pass Ms 9x5 mm (10 pcs) |
1 x | 20 mm carbon horn |
1 x | Towing hook |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Parachutist |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Threaded coupler M3 (10 uds) |
1 x | Cable Cargador FUTABA |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Ringöse 10 mm (50 pcs) |
1 x | Cylinder for DA-60 and DA-120 |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | Anchor 25 mm (2 uds) |
1 x | Propeller APC 11x8.5 Electric |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Boat 43 mm (5 pcs) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
3 x | Straightened threaded rod M2-1m |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pilot "Anthony" (Slimline) |
1 x | Boat 140 mm |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Small flex hinge (12 uds) |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Spinner propeller pleg. 40 mm / 5 mm |
1 x | Gates hinge aluminium (1 pcs) |
1 x | A50 Motor Mount Alu complete set |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Housing Ø 11 mm (20 pcs) |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Battery LiPo GENS 7000 mAh 4S 14.8v 50C (Gens Ace) |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Head core bushing |
1 x | Rivette Ø 4,0 mm (50 pcs) |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
2 x | |
2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Paint gun for sprays |
2 x | Silicone red 0,75 qmm wire ( 1 m) |
2 x | Ball link M3 (6 uds) |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Propeller APC 12x4.5 MR |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Oracover Azul Cielo 2 m |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Thruster propeller 30/33 mm with motor 400 7,2V |
1 x | 89 mm aluminium spinner. |
1 x | Battery LiPo GENS 6500 mAh 3S 11,1V 60C (Gens Ace) |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Central support Speed 600 |
1 x | Motor Mount for Multiplex FunJet |
1 x | 290 mm M5 Prop shaft |
1 x | Baering 3x8x4 |
1 x | Partall paste 650 g |
2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | ORACOVER Fluor red (2 m) |
1 x | Pulley 19x22 mm |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | L ELBOW 90º ø 25 mm |
1 x | Mounting single stop Ms 10 mm |
1 x | Extinguisher CO2 - 2 Kg |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Spinner propeller pleg. 38 mm / 6 mm |
1 x | Wing OXY 5,0 m2 |
1 x | Reed valve for DA-60/70 |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Pile railing 2D/16 mm (10 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Sheave Pl. 2R. 12 mm |
1 x | Motor DLE 430 cc - Paramotors |
1 x | AC-10 pre-rotacion with motor |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Spring for jet needle, fits DA-60/70 |
1 x | Stainless steel silencer for DA 85/170 |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Paramotor Trike XL |
2 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Axial ball bearing Ø 5 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | 3 mm Leader (L 100 mm) |
1 x | Servo Fork |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | LUCAS pilot ARTF |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Balsa panel 10x100x1000 mm |
2 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | Spinner 100 mm GFK |
1 x | Spinner 50 mm White (Kavan) |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Compass Ø 15 mm (20 pcs) |
1 x | Cylinder EME 35 cc |
1 x | Screws flush mount M2 |
1 x | Ventilation grid 17x62 mm (5 uds) |
2 x | Trailing leg 131 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | ABS tube 9.0x8.0x1000 mm |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Silicone red 1,5 qmm wire ( 1 m) |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | SunCover 50 Class (SebART) |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Glases Ace |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | 76 mm aluminium spinner. |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | Spinner propeller pleg. 45 mm / 5 mm |
1 x | 18m Fitting barb |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
2 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Mounting base Ms 12 mm |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | SunCover 2.6 Class (SebART) |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | RX external cable for estandar receivers |
1 x | Profile ABS half cane 3x1000 mm |
2 x | Battery LiPo TATTU 2000 mAh 3S 11,1V 100C |
1 x | 5 line servos wire black (1 m) |
1 x | Quick hose connector 4-4 mm |
1 x | Long ball link M1.6 (6 uds) |
1 x | Coupling for 3 mm axis |
1 x | Green smoke canister 100 g |
1 x | Mini neumatic retract landing gear |
2 x | PowerBox Smokepump JETs 2x outside |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Size "L" motor holder for class 600 |
1 x | Small Crow DLE-170M |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Para-RC Mix |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | UHU hart 35 g |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Cable with accesories |
1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
1 x | Windsock Ozone L - 700 mm |
1 x | Spring Clip 16 mm teflon tube |
1 x | Hinges 7x12 mm (20 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | ASPIRE Red ARF 2.000 mm, Canopy |
1 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Hot Glue Stick BLACK |
1 x | 50 mm gas motor standoff |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Xplorer4 anemometro |
1 x | Extension silicon 50 cm (Futaba) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | 3.2 mm Prop Adapter M8 |
1 x | ZENOAH ZG 62 SL |
1 x | Small pinned hinge (12 uds) |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Motor OS 15 LA |
1 x | 28 mm tailwheel unit |
1 x | 75 mm |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Dust collector for mould cleaning |
1 x | 3,0x60 mm allen screwdriver |
1 x | 39,0 mm propeller (left propeller) |
1 x | Spinner 90 mm GFK |
2 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Threaded coupler M2 (10 uds) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Hitec 52 mm servo arm |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Silicone black 6,0 qmm wire (25 m) |
1 x | CESSNA 50E White/Blue |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Brass wire 0.30 mm (25 m) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Wingstabi 9 DR M-Link Receiver |
1 x | Aramid 50 daN 50 m |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | MVVS presuritation conection 26-175 cc |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | RH long aluminium horn (2pcs) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Capstan of plastic 125x72x45 mm |
1 x | 18 mm reinforced hinge |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | Mini VISION "spread tow" CFK |
1 x | TAKEO 3.6m electric |
1 x | CC 02 |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | 2 LiPo XH>EH adapter |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | 4 LiPo XH>EH adapter |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Circlick securite |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | BEC 3A FOXY |
1 x | DPS Switch JR/JR |
1 x | Connector Sub-D 2+5 Female |
2 x | 3 LiPo XH>EH adapter |
1 x | Dean "T" - Futaba Adapter |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 5 LiPo XH>EH adapter |
1 x | Adapter lead MPX/XT60 |
2 x | Cabling for Fox MDM1 wings |
1 x | CM-3 |
1 x | Motor A2212/13T |
1 x | Flybar support metal LAMA |
1 x | Shaft sleeve LAMA |
1 x | Swashplate metal LAMA |
1 x | T-shape holder metal LAMA |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | SATORI 2 PRO V C64 F5J |
1 x | Canopy Astra |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | PowerBox iGyro 3xtra |
1 x | PowerBox iGyro SRS + GPS Modul |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | DUPLEX 2.4EX Central Box 220 |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | Locking cable tie 4.6x203 (uds) |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Suncover 100cc Red |
2 x | DPSI Ampere battery backer |
1 x | 1/12 Pilot "Fighter" |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | 200 mm extensión servo HITEC/JR |
1 x | 1/6 Pilot "Cindy" |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 1/6 Pilot "Tony" |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Resistor 3W 5% OR82 |
2 x | Logo 400 SE VBar |
1 x | VBar Control Touch, midnight black |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | White smoke canister 65 g |
1 x | Motor OS 46 AX II |
1 x | Spinner propeller pleg. 38 mm / 3,17 mm |
1 x | Compact on-board starting system (9525) |
1 x | 1000 ml sealer (DOPE) |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Spark motor OS nº 3 |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Extension for SensorSwitch 60cm |
1 x | PowerBox MagSensor red connector |
1 x | Charging Extension 50cm for 2 Battery |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Micro control horn T2 Ø 1 |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | POWERBOX Magic Jeti Switch Royal SRS, Champion SRS |
1 x | SPARK Switch 5.9v |
1 x | 2 piece mounting frame |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | Turbina X132 H "Light Version" |
1 x | Turbina XICOY X95 compact |
1 x | Turbina X45 H "Light Version" |
1 x | Turbina X132 H "Compact Version" |
1 x | Turbina XICOY X180 compact |
1 x | Turbina XICOY X180 light |
2 x | Turbina X45 H "compact" |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Plastic wheels 36 mm (2 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
2 x | Split pin 1x8 mm (10 uds) |
1 x | Plastic wheels 28 mm (2 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Screw M2x8 (10 pcs) |
1 x | Screw M2x6 (10 pcs) |
2 x | Snap long M2 (10 uds) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Tube Pitot to PIXHAWK |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | PowerBox Smokepump |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | Switching module high voltage SXH |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | UBEC 6A KAVAN |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Tygon tube 4.8 x 3.2 mm 1m |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Motor OS 37 SZ-H |
1 x | Motor OS 55 AX |
1 x | Motor OS MAX 120 AX |
1 x | Motor OS FS 75 AX |
1 x | Vasa model Catapult |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Central piece 62 mm 0º |
1 x | 4 mm Prop Adapter M6 |
1 x | Spinner fold propeller 36 mm (white spare spinner) |
1 x | 4 mm Prop Adapter M8 |
1 x | 4 mm Prop Adapter M8 |
1 x | 50 mm white plastic spinner for folding propeller |
1 x | NoNa BB wheel Ø130x40mm in pair |
1 x | Spinner black 36-38 mm |
1 x | 36 mm black plastic spinner for fixed propeller |
3 x | Spinner 3BL propeller pleg. 42 mm / 4,0 mm |
1 x | Ancla Hist. 67 mm (2 uds) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Fuel tank 500ml (17oz) |
1 x | Tail boom brace LOGO 480 |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | Fuel tank 1500ml (50oz) |
1 x | Spinner plastic white fixed propeller 51 mm |
2 x | DLE Ignition unit |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | Wings Bags JEEMO |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Blind nut M8 (10 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Bungee HLG Premium |
1 x | LOGO 600 SX (kit) |
1 x | Central piece 52 mm 0º |
1 x | Central piece 47 mm - 2,5º |
1 x | Spinner 3BL propeller pleg. 65 mm / 6,0 mm |
1 x | GLOW 5C + accesories |
1 x | Central piece 42 mm + 2,5º |
1 x | Central piece 3Bl 47 mm 0º |
1 x | Compact on-board starting system (9715) |
1 x | Central piece 72 mm 0º |
1 x | Central piece 47 mm + 5º |
1 x | 40 mm black plastic spinner for fixed propeller |
1 x | Spinner propeller pleg. 38 mm / 4,0 mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Adapter 3,2 mm M6 |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | 4 mm Prop Adapter M6 |
1 x | Black large kwik link (10 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Pinion 11 - 3,2 mm |
1 x | 45 mm white plastic spinner for folding propeller |
1 x | Actrocon 60A ESC |
1 x | ALU double servo arm 3 mm shaft |
1 x | Antiaircraft gun 3.7 cm (5 pcs) |
1 x | 40 mm white plastic spinner for fixed propeller |
1 x | 45 mm flag mast |
1 x | Snap for floding prop for 2 mm axi |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | 2,3 mm Prop Adapter M5 |
1 x | 5 mm Prop Adapter M6 |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | 10 mm dogdrive props |
1 x | Pinion 15 teeth (3:1) 2,3 mm axi diameter |
1 x | BlueCom™ Adapter (iOS) |
1 x | Extension for LC-Display 50cm |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Adapter 4,0 mm M6 |
1 x | 2 mm Prop Adapter M5 |
1 x | Pinion 13 - 3,2 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Adapter 3,2 mm M8 |
1 x | Adapter 3,0 mm M8 |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
2 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Pinion 15 - 3,2 mm |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Pinion 09 - 2 mm |
1 x | 12 mm dogdrive props |
1 x | Couple M4 for wire (10 pcs) |
1 x | Pinion 12 - 2 mm |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | |
|
69,250.73EUR |