1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Tank Kevlar ASPIRE 6 L Kero |
1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
1 x | ALBATROS L-39 G2 "Camo Tiger" Turbine ready |
1 x | IKARUS plane |
1 x | HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106 |
1 x | BD-5 Pro ARF |
2 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | Extension Arm for Carburetor (red) |
1 x | 500 ccm gasoline fuel tank |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | 550 cc gasoline fuel tank complet |
1 x | Deposito SECRAFT V2 1000 ml Gas |
2 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | Extension Arm for Carburetor |
1 x | SAITO FG-36 carburetor |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | Hose clips 6 mm |
1 x | DLE 55 carburetor |
2 x | Deposito DUBRO 360 ml - 12 oz |
1 x | 500 ccm complete gasoline fuel tank |
2 x | Profile ABS Square 4 x 1000 mm |
1 x | Compact on-board starting system (9715) |
1 x | Round Rod 4,0x1000 mm |
1 x | Ignition bed V2 Red color |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | 1000 ml sealer (DOPE) |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
2 x | Slave-cable USB Easy Sim |
1 x | Round Rod 6,0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Parachutist |
1 x | Ferrita 14x8x5.5 mm |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | ABS Strip 1.0x5.0x1000 mm |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | 1/12 Pilot "Langley" |
1 x | Rubber profile 6-2 mm 2M |
1 x | Glases Ace |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Green smoke canister 100 g |
1 x | Crimping tool |
1 x | Tow hook for tug |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Initior Receiver FRX2 Wireless |
1 x | Dust collector for mould cleaning |
1 x | Conector JR Servo male (50 pcs) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Interface Jack Adapter IKARUS |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | 90 mm rods + T patellas set for direction control |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Angle support XT60 conector |
1 x | Cable coupler M3 (10 uds) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Compact on-board starting system (9512) |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | 100g Flux Paste for Silver Solder |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Smoke set "Glider" |
1 x | Conector MT-60 (pair) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Dean-T Plug Mold |
1 x | Motor wall |
2 x | Head lower part New |
2 x | Head upper part |
1 x | Ball joint long |
1 x | Glases Stratus |
1 x | Strip 1,5x1,5x330 mm |
1 x | |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Universal Colour Paste deep black 50 g |
1 x | Selfstarr EME35 |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Interface Realflight Simulator |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Fixed launching hook |
1 x | Ferrita 27x14x7 mm |
1 x | Xplorer4 anemometro |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | "S" set for planes |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | Support FUEL DOT V3 |
1 x | Glases Nimbus "Black" |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | 1/12 Pilot "Tom" |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | |
1 x | Stickers-digit for marking |
2 x | Profile ABS half cane 2.5x1000 mm |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | Clip fixing for wing (2 pcs) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | Allen wheel collar M3x3 |
1 x | "M" set |
1 x | Cable coupler M2 (10 uds) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | 1/10 Pilot "Jimmy" |
1 x | EC-Cutter |
1 x | 1/6 Pilot "John" |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Bag connector 2 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | AX-60 starters (5 pcs) |
1 x | Cut tube |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Pilot "Goose" (Slimline) |
1 x | Cross Connector 4.0 mm x 1000 mm |
3 x | Banna gold connector 2,5 mm (M/F) |
1 x | Conector XT-30 (hembra) |
1 x | Strip 2,0x2,0x330 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
2 x | Canopy Latch |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Parachute expulsion foam |
1 x | Connectors banna oro 0,8 mm (M/F) |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
2 x | GLOW 5C + accesories |
1 x | Ferrita 17x10x6.5 mm |
1 x | 30 cm DEANS female connector |
1 x | Universal Colour Paste deep black 250 g |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Long ball link M1.6 (6 uds) |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Circlick securite |
1 x | BALSA trip 10x10x1000 mm |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
2 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
2 x | Jet Pipe for ULTIMATUM 2m |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Adapter 3,0 mm M8 |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | MAX pilot ARTF |
1 x | Opale Rucksack |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
2 x | Screw M3x16 |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Adapter 3,2 mm M8 |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Adapter 4,0 mm M8 |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | 2,3 mm Prop Adapter M5 |
2 x | Couple M4 for wire (10 pcs) |
2 x | Adapter 3,2 mm M6 |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Adapter 5,0 mm M8 |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Adapter 3,0 mm M6 |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Threaded coupler M2 (10 uds) |
2 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
2 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | HOPPER tank INTAIRCO iTrap 50 175 ml 3x racor 6mm CLASSIC PRO |
1 x | diameter silicone tube for glow |
1 x | Heat sink for Optotronix LEDs |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | wire tensioner (blue) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Window mounting channel 5m |
2 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Spray Graphit 33 |
2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Screws flush mount M2 |
1 x | Wheel keeper washer |
1 x | Tail support (2 pcs) |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Nut M2 |
1 x | Battery plate |
1 x | Head core bushing |
1 x | Carbon blade 3D 230 mm |
1 x | Rotor Mast |
1 x | Blades 330mm |
1 x | Blade holder upper |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | Dremel PERMAGRIT 18 mm round lime |
2 x | Profile ABS half cane 7.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Check valve quick hose connector 4-4 mm |
1 x | FESTO connector M5 Quick 4 mm |
1 x | T-Hose connector 4-4-4mm |
1 x | Quick hose connector 3-3 mm |
1 x | Fuel Fittings-Blue |
1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
1 x | Fuel Station 20L |
1 x | Starter EM Gear Power 250 |
1 x | GLOW 9C + accesories |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Reed valve for DA 50-R |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | Intairco CMB Super Filter - 6mm Barb |
1 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x racor 6mm CLASSIC PRO |
1 x | Fuel station 20L incl. pump electric |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | Electronic double valve landing gear |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | Y-Hose connector 4-4-4mm |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Resistor 3W 5% 2R2 |
2 x | Allen wheel collar M4x6 |
1 x | Kwik link unmount tool |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Adjustable launching hook |
2 x | Foam plastic plates (310x210x5 mm) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Heli blades angle measurer |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | MPX Support (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Power MULTIlight |
1 x | |
1 x | 500 ml sealer (DOPE) |
1 x | Partall paste 650 g |
1 x | Universal Colour Paste white 50 g |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Mounting frame MPX male connector |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Combo lighting module with covering drop shape |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Blade holder center |
1 x | Head lower part |
1 x | Servo Fork |
1 x | Nut M2 securing |
1 x | Nut M1,6 |
1 x | Tail boom |
1 x | Bearing housing |
1 x | Side rudder |
1 x | Blade holder lower |
1 x | Rudder |
1 x | Blade holder center GFK 0,5 mm |
1 x | Bearing 3x6x2,5 |
1 x | Swashplate metal LAMA |
1 x | METEOR 1.000 mm kit |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Xplorer1 anemometro |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Aluminium ignition bad (blue) |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Ball Link Plier |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Tube Pitot to PIXHAWK |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Electromotor starter EME 35cc |
1 x | Y Cable |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | 55% silver electrodes (2 pcs) |
1 x | USB Mini Camera endoscope |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | SWTU2 switch |
1 x | Transmitter Balancer Futaba V |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Adap/Exten for Futaba 12-14C |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | 5 mm Prop Adapter M6 |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | 2 mm Prop Adapter M5 |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner NUT M5 |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Adapter 4,0 mm M6 |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Spinner Alumin. propeller pleg. 40 mm / 3,0 mm |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Frontal support Speed 280 |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Fuel line plug Small 2 pcs |
1 x | Nylon threaded block M5 (2 uds) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Medium pin type hinge (12 uds) |
1 x | Long ball link M3 (6 uds) |
1 x | Blind nut M6 (4 pcs) |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Landing gear strap small (4 uds) |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | Blind nut M3 (4 pcs) |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
1 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | 10 mm dogdrive props |
1 x | |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | Excentric gearbox for 2,3mm axis (2,33:1) |
1 x | Lock nut M2 (20 pcs) |
1 x | Long ball link M2 (6 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
1 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
1 x | Canopy BULL MØ1 2.600mm |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
1 x | Spinner negro 40 mm |
1 x | 3 mm Short Prop Adapter M5 |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | 5 mm Prop Adapter M8 |
1 x | Spinner black 30 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Spinner NUT M4 |
1 x | 12 mm dogdrive props |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner white 40 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | 4 mm Prop Adapter M6 |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Excentric gearbox for 3,2mm axis (4,1:1) |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,8:1) |
1 x | Frontal support Speed 400/480 |
1 x | Excentric gearbox for 2,3mm axis (4,1:1) |
1 x | Excentric gearbox for 2,0mm axis (4,1:1) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,33:1) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Nylon Screw M4x20 |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
|
29,300.09EUR |