2,950.00EUR

Futaba 32MZ 2.4GHz + R7108SB
[FUT32MZ]

Futaba 32MZ 2.4GHz + R7108SB

Futaba’s new flagship radio, the T32MZ, is another leap forward in performance, precision and control.
** NOTE - Pre-Production Information - subject to change without notice. **

With 18 channels as standard - 16 proportional and 2 switched channels - the T32MZ can be used with up to two MPDX-1 Multiprop Decoders (sold separately) to give up to a maximum of 32 channels. When expanded this way, there are 14 proportional channels (as two are used by the Multiprop Decoders), 2 switched channels and a further 16 multiprop channels. Note that multiprop channels have lower resolution to normal proportional channels and they can’t be used in mixed functions. They are perfect for ancilliary and auxiliary functions such as lights, retracts and scale, non-flying functions.
Main Display
The T32MZ has a huge HVGA (640x240 pixel) full colour backlit LCD touch screen. Its anti-reflective construction means it is perfect for indoor and outdoor use.

Sub Display
A first for Futaba, the T32MZ has a colour sub-display at the top of the transmitter for timers and telemetry information.

High Capacity 6600mAh LiPo battery
A high capacity transmitter battery gives extended operation times.

Quad Ballraced Hall Effect Stick Units
Each stick axis is supported by dual ball bearings and uses non-contact Hall-effect sensors rather than potentiometers. The throttle stick ratchet can be adjusted to sprung self-neutral without removing the back of the transmitter, thus mode changing is simple.

Replaceable Switches
The 4 toggle switches can be exchanged for optional two, three or momentary switches to suit the pilot’s preference.

Operating protocols
Can be used on FASSTest/FASST/S-FHSS and T-FHSS protocols.

Supplied complete with R7108SB receiver, 6000mAh transmitter LiPo and charger, switch harness, tool box, neck strap and transmitter case.

under request

Reviews

Quick Find

Shopping Cart

2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
3 x	2 LiPo XH>EH adapter
3 x	Cabel charger transmitter GRAUPNER
2 x	5 LiPo XH>EH adapter
2 x	Dean "T" - Futaba Adapter
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	DPS Switch JR/JR
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
3 x	30 cm BEC cable (male)
1 x	BEC 3A FOXY
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	CC 02
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Connector Sub-D 2+5 Male
1 x	Tape GFK 25 mm
1 x	Tape GFK 50 mm
1 x	SE Ring 240 mm (2 pcs)
2 x	SE Ring 360 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	SE Ring 300 mm (2 pcs)
2 x	30 cm BEC cable (female)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	Tape GFK 38 mm
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Cinta Goldfix 1m
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	3 LiPo XH>EH adapter
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	CC 01
2 x	20x1000 mm Ring Strap Back To Back
1 x	Foil for sticking flaps and ailerons
3 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Marker ties (20 pcs)
1 x	SE Ring 480 mm (2 pcs)
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	20x200 mm battery rings
5 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Circlick securite
2 x	SE Ring 350 mm (2 pcs)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
2 x	Extension silicon 30 cm female (Futaba)
3 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x	Cabel "Y" 30 cm (graupner)
1 x	USB Mini Camera endoscope
1 x	Extension 100 cm (Futaba)
1 x	Premium servo extension 50cm
1 x	Extension silicon 100 cm (Futaba)
2 x	Extension 30 cm (Futaba)
2 x	Extension silicon 30 cm female (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
2 x	Extension PVC 150 cm (Graupner)
3 x	Extension silicon 30 cm male (Graupner)
1 x	Futaba Female 40 cm extension
1 x	Premium servo extension 100cm
1 x	Premium servo extension 75cm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Hovercraft sailcloth
1 x	Brass rod Ø 1.5 mm x 1000 mm
2 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
2 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
2 x	ABS tube 2.0x1.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
2 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Tow hook for tug
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	80 mm rods set for direction control
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	DPSI magnetic switch actuator (housing)
1 x	Connector CAN 15
1 x	White silicone 0,25 qmm wire (150 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Extension silicon 75 cm (Futaba)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 50 cm (Futaba)
2 x	Ring 320 mm length (5 pcs)
2 x	Extension silicon 35 cm (Futaba)
1 x	Extension silicon 100 cm (Graupner)
2 x	Support pumb/filter Xicoy X45
2 x	silicon 100 cm Futaba Extension Ø 0,35 mm
2 x	Extension silicon 75 cm (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	SE Ring 330 mm (4 pcs)
1 x
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Futaba Female 40 cm extension
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	200 mm extensión servo HITEC/JR
1 x	Support FUEL DOT V3
1 x	Support conector MPX (6 pcs)
2 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Adapter lead MPX/XT60
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Premium servo extension 25cm
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	SE Ring 450 mm (2 pcs)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Charger ISDT 608AC 200W
1 x	Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	PIX Hawk with accesories
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Ball Bearing Oil 25 ml
2 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Electric starter BEE (old)
2 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension 5 lipos JST/C
1 x	Extension 2/3 lipos JST/C
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Crimping tool
1 x	Connectors banna oro 3 mm (M/F)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Aluminum Fold Prop Spinner 50 mm / 6mm
1 x	XH male balance (4S) connector (2 pcs)
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Futaba FX36 2.4GHz FASST Test + R7008SB
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Extension silicon 30 cm male (Futaba)
1 x	Savox Brushless Servo SC-1251 MG
1 x	SAVOX SH 0255 MG servo
1 x	Extension 6 lipos XH > EH
1 x	Extension silicon 25 cm (Futaba)
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Multi-adapter balancer JST/C - TP
1 x	Aluminum Fold Prop Spinner 34 mm / 3 mm
1 x	Red 3m5 mm connector holder
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Support pump Xicoy X45
1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita con funda
1 x	Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.)
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Ferrita 27x14x7 mm

6,519.52EUR